update chrony and sshd config templates (#216)

Reviewed-on: #216
Co-authored-by: Michael Grote <michael.grote@posteo.de>
Co-committed-by: Michael Grote <michael.grote@posteo.de>

roles/mgrote_ntp_chrony_client/templates/chrony.conf.j2

@@ -1,19 +1,50 @@
 {{ file_header | default () }}
-# servers
+# Welcome to the chrony configuration file. See chrony.conf(5) for more
+# information about usable directives.
+
+# Include configuration files found in /etc/chrony/conf.d.
+confdir /etc/chrony/conf.d
+
+# This will use (up to):
+# - 4 sources from ntp.ubuntu.com which some are ipv6 enabled
+# - 2 sources from 2.ubuntu.pool.ntp.org which is ipv6 enabled as well
+# - 1 source from [01].ubuntu.pool.ntp.org each (ipv4 only atm)
+# This means by default, up to 6 dual-stack and up to 2 additional IPv4-only
+# sources will be used.
+# At the same time it retains some protection against one of the entries being
+# down (compare to just using one of the lines). See (LP: #1754358) for the
+# discussion.
+#
+# About using servers from the NTP Pool Project in general see (LP: #104525).
+# Approved by Ubuntu Technical Board on 2011-02-08.
+# See http://www.pool.ntp.org/join.html for more information.
 {% for item in ntp_chrony_servers %}
 server {{ item.address }} {{ item.options |default() }}
 {% endfor %}
+# Use time sources from DHCP.
+sourcedir /run/chrony-dhcp
 
-# keys
+# Use NTP sources found in /etc/chrony/sources.d.
+sourcedir /etc/chrony/sources.d
+
+# This directive specify the location of the file containing ID/key pairs for
+# NTP authentication.
 keyfile /etc/chrony/chrony.keys
 
-# driftfile
+# This directive specify the file into which chronyd will store the rate
+# information.
 driftfile {{ ntp_chrony_driftfile_directory }}/chrony.drift
 
+# Save NTS keys and cookies.
+ntsdumpdir /var/lib/chrony
+
+# Uncomment the following line to turn logging on.
+{% if ntp_chrony_logging is sameas true %}
+#log tracking measurements statistics
+{% endif %}
 
 {% if ntp_chrony_logging is sameas true %}
-# Logging
+# Log files location.
-log tracking measurements statistics
 logdir /var/log/chrony
 {% endif %}
 
@@ -21,9 +52,14 @@ logdir /var/log/chrony
 maxupdateskew 100.0
 
 # This directive enables kernel synchronisation (every 11 minutes) of the
-# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
+# real-time clock. Note that it can't be used along with the 'rtcfile' directive.
 rtcsync
 
 # Step the system clock instead of slewing it if the adjustment is larger than
 # one second, but only in the first three clock updates.
 makestep 1 3
+
+# Get TAI-UTC offset and leap seconds from the system tz database.
+# This directive must be commented out when using time sources serving
+# leap-smeared time.
+leapsectz right/UTC

roles/mgrote_ssh/templates/ubuntu.j2

@@ -2,7 +2,7 @@
 # This is the sshd server system-wide configuration file.  See
 # sshd_config(5) for more information.
 
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 
 # The strategy used for options in the default sshd_config shipped with
 # OpenSSH is to specify options with their default value where
@@ -38,7 +38,7 @@ Port {{ ssh_listen_port }}
 #PubkeyAuthentication yes
 
 # Expect .ssh/authorized_keys2 to be disregarded by default in future.
-#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2
+#AuthorizedKeysFile     .ssh/authorized_keys .ssh/authorized_keys2
 
 #AuthorizedPrincipalsFile none
 
@@ -59,7 +59,7 @@ PasswordAuthentication {{ ssh_password_authentication }}
 
 # Change to yes to enable challenge-response passwords (beware issues with
 # some PAM modules and threads)
-ChallengeResponseAuthentication no
+KbdInteractiveAuthentication no
 
 # Kerberos options
 #KerberosAuthentication no
@@ -75,15 +75,14 @@ ChallengeResponseAuthentication no
 
 # Set this to 'yes' to enable PAM authentication, account processing,
 # and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
+# be allowed through the KbdInteractiveAuthentication and
 # PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
+# PAM authentication via KbdInteractiveAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
+# the setting of "PermitRootLogin prohibit-password".
 # If you just want the PAM account and session checks to run without
 # PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
+# and KbdInteractiveAuthentication to 'no'.
 UsePAM yes
-
 #AllowAgentForwarding yes
 #AllowTcpForwarding yes
 #GatewayPorts no
@@ -99,7 +98,7 @@ PrintLastLog {{ ssh_print_lastlog }}
 #ClientAliveInterval 0
 #ClientAliveCountMax 3
 #UseDNS no
-#PidFile /var/run/sshd.pid
+#PidFile /run/sshd.pid
 #MaxStartups 10:30:100
 #PermitTunnel no
 #ChrootDirectory none
@@ -112,12 +111,12 @@ PrintLastLog {{ ssh_print_lastlog }}
 AcceptEnv LANG LC_*
 
 # override default of no subsystems
-Subsystem	sftp	/usr/lib/openssh/sftp-server
+Subsystem       sftp    /usr/lib/openssh/sftp-server
 
 # Example of overriding settings on a per-user basis
 #Match User anoncvs
-#	X11Forwarding no
-#	AllowTcpForwarding no
-#	PermitTTY no
-#	ForceCommand cvs server
 PermitRootLogin {{ ssh_permit_root_login }}
+#       X11Forwarding no
+#       AllowTcpForwarding no
+#       PermitTTY no
+#       ForceCommand cvs server