diff --git a/mikrotik/mt_system b/mikrotik/mt_system
index 2a5ca7f..e49cd51 100644
--- a/mikrotik/mt_system
+++ b/mikrotik/mt_system
@@ -16,20 +16,48 @@
 # on the router
 # /user add name=munin group=read password=hallowelt address=<munin-server-ip>
 
+#       voltage: 24.5V
+#   temperature: 46C
+#                    uptime: 1w6d17h12m25s
+#                   version: 6.48.4 (stable)
+#                build-time: Aug/18/2021 06:43:27
+#          factory-software: 6.46.3
+#               free-memory: 209.9MiB
+#              total-memory: 256.0MiB
+#                       cpu: MIPS 1004Kc V2.15
+#                 cpu-count: 4
+#             cpu-frequency: 880MHz
+#                  cpu-load: 0%
+#            free-hdd-space: 4760.0KiB
+#           total-hdd-space: 16.3MiB
+#   write-sect-since-reboot: 46412
+#          write-sect-total: 62012
+#                bad-blocks: 0%
+#         architecture-name: mmips
+#                board-name: hEX
+#                  platform: MikroTik
+#  # CPU                          LOAD         IRQ        DISK
+#  0 cpu0                         0%          0%          0%
+#  1 cpu1                         1%          1%          0%
+#  2 cpu2                         0%          0%          0%
+#  3 cpu3                         1%          0%          0%
+#
+
 # pruefe ob sshpass installiert ist
 if [[ $(dpkg -l sshpass > /dev/null 2>&1) -ne "0" ]] ; then
     echo "could not find sshpass"
     exit 1
 fi
 
-data=$(sshpass -p $ssh_password ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $ssh_user@$ssh_host -q ':delay 6s; /system health print; /system resource print; /sytem resource cpu print')
-
+data=$(sshpass -p $ssh_password ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $ssh_user@$ssh_host -q ':delay 1s; /system health print; /system resource print; /system resource cpu print')
+#data=$(cat output)
 # setze user und passwort
 ssh_user=${ssh_user:-user}
 ssh_password=${ssh_password:-password}
 ssh_host=${ssh_host:-192.168.2.1}
 name=${name:-mikrotik}
 
+
 # wenn parameter = ...
 if [ "$1" = "autoconf" ]; then
   echo yes
@@ -38,121 +66,117 @@ fi
 
 if [ "$1" = "config" ]; then
   while read -r line; do
-    if echo $line | grep 'temperature:' > /dev/null; then
-      # setze optionen
-      echo multigraph mikrotik_temperature_graph_$name
-      echo graph_title temperature $name  # Titelzeile
-      echo graph_vlabel °C # Text links, hochkant
-      echo graph_category mikrotik # Kategorie
-      echo graph_args -l 0
-      echo temperature.label cpu temperature
-      echo temperature.warning 75
-      echo temperature.critical 90
-    fi
-    if echo $line | grep 'voltage:' > /dev/null; then
-      echo multigraph mikrotik_voltage_graph_$name
-      echo graph_title voltage $name
-      echo graph_vlabel volt
-      echo graph_category mikrotik
-      echo graph_args -l 0
-      echo voltage.label voltage
-    fi
-    if echo $line | grep 'bad-blocks:' > /dev/null; then
-      echo multigraph mikrotik_bad_blocks_graph_$name
-      echo graph_title bad blocks $name
-      echo graph_vlabel %
-      echo graph_category mikrotik
-      echo graph_args -l 0 --upper-limit 100
-      echo bad_blocks.label bad_blocks
-      echo bad_blocks.warning 2
-      echo bad_blocks.critical 25
-    fi
-    if echo $line | grep 'write-sect-total:' > /dev/null; then
-      echo multigraph mikrotik_write_sect_total_graph_$name
-      echo graph_title Total sector writes $name
-      echo graph_vlabel count
-      echo graph_category mikrotik
-      echo graph_args -l 0
-      echo write_sect_total.label write_sect_total
-    fi
-    if echo $line | grep 'write-sect-since-reboot:' > /dev/null; then
-      echo multigraph mikrotik_write_sect_since_reboot_graph_$name
-      echo graph_title Sector writes since reboot $name
-      echo graph_vlabel count
-      echo graph_category mikrotik
-      echo graph_args -l 0
-      echo write_sect_since_reboot.label write_sect_since_reboot
-    fi
-    if echo $line | grep 'cpu-load:' > /dev/null; then
-      echo multigraph mikrotik_cpu_load_graph_$name
-      echo graph_title cpu load $name
-      echo graph_vlabel %
-      echo graph_category mikrotik
-      echo graph_args -l 0 --upper-limit 100
-      echo cpu_load.label cpu_load
-      echo cpu_load.warning 75
-      echo cpu_load.critical 90
-      echo cpu_load.draw AREA
-    fi
-    if echo $line | grep 'cpu-count:' > /dev/null; then
-      echo multigraph mikrotik_cpu_load_detailed_graph_$name
-      echo graph_title cpu load detailed $name
-      echo graph_vlabel %
-      echo graph_category mikrotik
-      echo graph_args -l 0 --upper-limit 100
-      echo cpu_load_detailed.label cpu_load_detailed
-    fi
+  echo $line| awk '/voltage:/{
+    print "multigraph mikrotik_voltage_graph_""'"$name"'";
+    print "graph_title voltage " "'"$name"'";
+    print "graph_vlabel volt";
+    print "graph_category mikrotik";
+    print "graph_args -l 0";
+    print "voltage.label voltage";
+    }'
+  echo $line| awk '/bad-blocks:/{
+    print "multigraph mikrotik_bad_blocks_graph_""'"$name"'";
+    print "graph_title Total sector writes " "'"$name"'";
+    print "graph_vlabel %";
+    print "graph_category mikrotik";
+    print "graph_args -l 0 --upper-limit 100";
+    print "bad_blocks.label bad_blocks";
+    print "bad_blocks.warning 2";
+    print "bad_blocks.critical 25";
+    }'
+  echo $line| awk '/write-sect-total:/{
+    print "multigraph mikrotik_write_sect_total_graph_""'"$name"'";
+    print "graph_title Total sector writes " "'"$name"'";
+    print "graph_vlabel count";
+    print "graph_category mikrotik";
+    print "graph_args -l 0";
+    print "write_sect_total.label write_sect_total";
+    }'
+  echo $line| awk '/write-sect-since-reboot:/{
+    print "multigraph mikrotik_write_sect_since_reboot_graph_""'"$name"'";
+    print "graph_title Sector writes since reboot " "'"$name"'";
+    print "graph_vlabel count";
+    print "graph_category mikrotik";
+    print "graph_args -l 0";
+    print "write_sect_since_reboot.label write_sect_since_reboot";
+    }'
+  echo $line| awk '/cpu-load:/{
+    print "multigraph mikrotik_cpu_load_graph_""'"$name"'";
+    print "graph_title cpu load " "'"$name"'";
+    print "graph_vlabel %";
+    print "graph_category mikrotik";
+    print "graph_args -l 0 --upper-limit 100";
+    print "cpu_load.label cpu_load";
+    print "cpu_load.warning 75";
+    print "cpu_load.critical 90";
+    print "cpu_load.draw AREA"
+    }'
+  echo $line| awk '/temperature:/{
+    print "multigraph mikrotik_temperature_graph_""'"$name"'";
+    print "graph_title temperature " "'"$name"'";
+    print "graph_vlabel °C";
+    print "graph_category mikrotik";
+    print "graph_args -l 0";
+    print "temperature.label cpu temperature";
+    print "temperature.warning 75";
+    print "temperature.critical 90";
+    }'
   done <<< "$data"
+  if [ "$MUNIN_CAP_DIRTYCONFIG" = "1" ]; then
+    echo $line| awk '/voltage:/{
+      gsub(/V/,"",$2);
+      print "voltage.value " $2
+      }'
+    echo $line| awk '/bad-blocks:/{
+      gsub(/%/,"",$2);
+      print "bad_blocks.value " $2
+      }'
+    echo $line| awk '/write-sect-total:/{
+      print "write_sect_total.value " $2
+      }'
+    echo $line| awk '/write-sect-since-reboot:/{
+      print "write_sect_since_reboot.value " $2
+      }'
+    echo $line| awk '/cpu-load:/{
+      gsub(/%/,"",$2);
+      print "cpu_load.value " $2
+      }'
+    echo $line| awk '/temperature:/{
+      gsub(/C/,"",$2);
+      print "temperature.value " $2
+      }'
+  fi
   exit 0
 fi
 #echo debug ######
 #echo $ssh_user
 #echo $ssh_password
 #echo $ssh_host
-
-while read -r line; do
-  if echo $line | grep 'temperature:' > /dev/null; then
-    echo $line | grep 'temperature:'  | sed 's/C//g' | awk '{ print "multigraph mikrotik_temperature_graph_" "'"$name"'"; print "temperature.value "$2 }'
-  fi
-  if echo $line | grep 'voltage:' > /dev/null; then
-    echo $line | grep 'voltage:' | sed 's/V//g' | awk '{ print "multigraph mikrotik_voltage_graph_" "'"$name"'"; print "voltage.value "$2 }'
-  fi
-  if echo $line | grep 'cpu-load:' > /dev/null; then
-    echo $line | grep 'cpu-load:' | sed 's/%//g' | awk '{ print "multigraph mikrotik_cpu_load_graph_" "'"$name"'"; print "cpu_load.value "$2 }'
-  fi
-  if echo $line | grep 'bad-blocks:' > /dev/null; then
-    echo $line | grep 'bad-blocks:' | sed 's/%//g' | awk '{ print "multigraph mikrotik_bad_blocks_graph_" "'"$name"'"; print "bad_blocks.value "$2 }'
-  fi
-  if echo $line | grep 'write-sect-since-reboot:' > /dev/null; then
-    echo $line | grep 'write-sect-since-reboot:' | awk '{ print "multigraph mikrotik_write_sect_since_reboot_graph_" "'"$name"'"; print "write_sect_since_reboot.value "$2 }'
-  fi
-  if echo $line | grep 'write-sect-total:' > /dev/null; then
-    echo $line | grep 'write-sect-total:' | awk '{ print "multigraph mikrotik_write_sect_total_graph_" "'"$name"'"; print "write_sect_total.value "$2 }'
-  fi
-  if echo $line | grep 'cpu-count' > /dev/null; then
-    anzahl_cpu=$(echo $line | grep 'cpu-count:' | awk '{ print $2 }' | tr -dc '[:print:]')
-    # tr?
-    # error: ")syntax error: invalid arithmetic operator (error token is "
-    # https://stackoverflow.com/questions/23816264/remove-all-special-characters-and-case-from-string-in-bash
-    # --> https://www.shell-tips.com/bash/math-arithmetic-calculation/
-    echo multigraph mikrotik_cpu_load_detailed_graph_$name
-    echo vor schleife
-    echo $line | grep cpu0
-    c=0
-    echo c $c
-    echo anzahl $anzahl_cpu
-    while [ "$c" -lt "$anzahl_cpu" ]
-    do
-      echo in schleife
-      #FEHLER IST DAS GREP NIE CPU0 us ausgibt, hier fehlt before/after
-      echo $line | grep cpu$c | sed 's/%//g' | awk '{ print "cpu_load_detailed_graph_load cpu" "'"$c"'" $3; print "cpu_load_detailed_graph_irq cpu" "'"$c"'" $4; print "cpu_load_detailed_graph_disk cpu" "'"$c"'" $5}'
-      c=$(( $c + 1 ))
-    done
-  fi
-done <<< "$data"
-
+echo $line| awk '/voltage:/{
+  gsub(/V/,"",$2);
+  print "voltage.value " $2
+  }'
+echo $line| awk '/bad-blocks:/{
+  gsub(/%/,"",$2);
+  print "bad_blocks.value " $2
+  }'
+echo $line| awk '/write-sect-total:/{
+  print "write_sect_total.value " $2
+  }'
+echo $line| awk '/write-sect-since-reboot:/{
+  print "write_sect_since_reboot.value " $2
+  }'
+echo $line| awk '/cpu-load:/{
+  gsub(/%/,"",$2);
+  print "cpu_load.value " $2
+  }'
+echo $line| awk '/temperature:/{
+  gsub(/C/,"",$2);
+  print "temperature.value " $2
+  }'
 exit 0
 
+#
 
 #suchbegriff
 #name
@@ -170,3 +194,18 @@ exit 0
  # CPU                            LOAD         IRQ        DISK
  #0 cpu0                             1%          0%          0%
 #1 cpu1                             0%          0%          0%
+
+
+#   echo $line| awk '/bad-blocks:/{
+#     print "multigraph mikrotik_bad_blocks_graph_""'"$name"'";
+#     print "graph_title Total sector writes " "'"$name"'";
+#     print "graph_vlabel %";
+#     print "graph_category mikrotik";
+#     print "graph_args -l 0 --upper-limit 100";
+#     print "bad_blocks.label bad_blocks";
+#     print "bad_blocks.warning 2";
+#     print "bad_blocks.critical 25";
+#     gsub(/%/,"",$2);
+#     print "bad_blocks.value " $2
+#     }'
+#   IN DOKU mit erklärung