qmk_sweep_skeletyl/keyboards/keebio/bamfk4/config.h

// Copyright 2022 Danny Nguyen (@nooges)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

#include "config_common.h"


/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 4

/*
 * Keyboard Matrix Assignments
 */
#define MATRIX_ROW_PINS { F0 }
#define MATRIX_COL_PINS { E6, D5, B6, B7 }

/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

#define RGB_DI_PIN D3
#ifdef RGB_DI_PIN
#    define RGBLED_NUM 32
#    define RGBLIGHT_HUE_STEP 8
#    define RGBLIGHT_SAT_STEP 8
#    define RGBLIGHT_VAL_STEP 8
#    define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
#    define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== enabled animations ==*/
#    define RGBLIGHT_EFFECT_BREATHING
#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#    define RGBLIGHT_EFFECT_SNAKE
#    define RGBLIGHT_EFFECT_KNIGHT
#    define RGBLIGHT_EFFECT_CHRISTMAS
#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
#    define RGBLIGHT_EFFECT_RGB_TEST
#    define RGBLIGHT_EFFECT_ALTERNATING
#    define RGBLIGHT_EFFECT_TWINKLE
#    define RGBLIGHT_DEFAULT_VAL 120
#    define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
// RGB Matrix
//#    ifdef RGB_MATRIX_ENABLE
#        define ENABLE_RGB_MATRIX_ALPHAS_MODS
#        define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#        define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#        define ENABLE_RGB_MATRIX_BREATHING
#        define ENABLE_RGB_MATRIX_BAND_SAT
#        define ENABLE_RGB_MATRIX_BAND_VAL
#        define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#        define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#        define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#        define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#        define ENABLE_RGB_MATRIX_CYCLE_ALL
#        define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#        define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#        define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#        define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#        define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#        define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#        define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#        define ENABLE_RGB_MATRIX_DUAL_BEACON
#        define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#        define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
#        define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#        define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
#        define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#        define ENABLE_RGB_MATRIX_SPLASH
#        define ENABLE_RGB_MATRIX_MULTISPLASH
#        define ENABLE_RGB_MATRIX_SOLID_SPLASH
#        define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#        define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160
#        define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
#        define RGB_MATRIX_LED_COUNT RGBLED_NUM
#        define RGB_DISABLE_WHEN_USB_SUSPENDED
#        define RGB_MATRIX_KEYPRESSES
//#    endif
#endif


/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0