qmk_sweep_skeletyl/keyboards/axolstudio/yeti/hotswap/readme.md

# Axolstudio Yeti RGB

![yeti](https://i.imgur.com/eoRH6W1l.png)

**TGR Alice inspired board with some extra heft**

* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
* Hardware Supported: Axolstudio Yeti Hotswap RGB PCB
* Hardware Availability: https://axolstudio.ca/yeti

Make example for this keyboard (after setting up your build environment):

    make axolstudio/yeti/hotswap:default

Flashing example for this keyboard:

    make axolstudio/yeti/hotswap:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available