qmk_sweep_skeletyl/keyboards/ducky/one2sf/1967st/readme.md

# One 2 SF (DKON1967ST)

A 65% keyboard by Ducky.

This firmware was tested on the Ducky One 2 SF 1967ST version.

* Keyboard Maintainer: [f7urry](https://github.com/f7urry)
* Hardware Supported: Ducky One 2 SF RGB (DKON1967ST), NUC123SD4AN0 + MBI5043GP
  * Only ANSI layout is supported at this time (ISO & VIA still WIP).
  * RGB LEDs are currently disabled until the driver is merged.

## Compiling the Firmware:

    make ducky/one2sf/1967st:default

## Accessing Bootloader Mode

To enter the 1967ST bootloader to flash, boot the keyboard while holding D+L.

## Flashing the Firmware:

There are then two ways to flash the keyboard:

    pip install --user nuvoton-isp
    nuvoisp -f ducky_one2sf_ansi.bin

Alternatively you can use elfmimi's [nu-isp-cli](https://lib.rs/crates/nu-isp-cli) which is more complete than nuvoisp and allows flashing .hex files as well.

    cargo install nu-isp-cli
    nu-isp-cli flash ducky_one2sf_ansi.bin

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Ducky One 2 SF touch-up (#17672) * info.json: correct JSON syntax error * info.json: correct key sizes * update readme files Moves nearly all of the information about this keyboard to the 1967st version's readme, because this readme is exposed in QMK Configurator. Also updates the readme to align more closely with QMK's keyboard readme template. * info.json: update metadata Updates the keyboard name and maintainer fields. 2022-07-13 22:57:55 +02:00			`# One 2 SF (DKON1967ST)`

			`A 65% keyboard by Ducky.`

			`This firmware was tested on the Ducky One 2 SF 1967ST version.`

			`* Keyboard Maintainer: [f7urry](https://github.com/f7urry)`
			`* Hardware Supported: Ducky One 2 SF RGB (DKON1967ST), NUC123SD4AN0 + MBI5043GP`
			`* Only ANSI layout is supported at this time (ISO & VIA still WIP).`
			`* RGB LEDs are currently disabled until the driver is merged.`

			`## Compiling the Firmware:`

			`make ducky/one2sf/1967st:default`

			`## Accessing Bootloader Mode`

			`To enter the 1967ST bootloader to flash, boot the keyboard while holding D+L.`

			`## Flashing the Firmware:`

			`There are then two ways to flash the keyboard:`

			`pip install --user nuvoton-isp`
			`nuvoisp -f ducky_one2sf_ansi.bin`

			`Alternatively you can use elfmimi's [nu-isp-cli](https://lib.rs/crates/nu-isp-cli) which is more complete than nuvoisp and allows flashing .hex files as well.`

			`cargo install nu-isp-cli`
			`nu-isp-cli flash ducky_one2sf_ansi.bin`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`