qmk_sweep_skeletyl/keyboard/hhkb/README.md

Alternative Controller for HHKB Pro
===================================
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and firmware source code is not open, of course. This means customizing this keyboard needs to replace original controller with programmable one.

This controller can work with HHKB **Professional**, **Professional** 2, **JP** and **Type-S**.

See [this thread][AltController] in geekhack.org.

[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
[AltController]: http://geekhack.org/index.php?topic=12047.0


##Features
* Customizable keymap
* More keymap layers(more Fn keys)
* Mouse keys
* USB NKRO

See README of [tmk_keyboard] for more.

[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
 
###Pros
* No risks: Everything is all reversible
* No need for PCB trace patching, case cutting or any other destructive mod
* Can keep original controller intact
* Can change all HHKB behavior as you like

###Cons
* Void your warranty
* Lose USB hub function of Pro2

##DISCLAIMER
I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
And my English writing is poor, I'm not sure I can convey my notions accurately.


##Documents
See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.


##Build Firmware & Program
See [this document](../../doc/build.md) first.

### Configuration
Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile`.

### Build 
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:

    $ make KEYMAP=[hasu|hhkb|spacefn|<name>]


### Program
First, push reset button on board to start bootloader.

This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.

    $ make dfu

Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.

    $ make flip

Use [Teensy Loader] if your controller is Teensy/Teensy++.


##Keymap
To define your own keymap create file named `keymap_<name>.c` and see [keymap document](../../doc/keymap.md) and existent keymap files.


##Hardware
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheaper option for DIY.

###1. TMK Alt Controller Board
Design files are available at [Keyboard Controller Board for HHKB(KiCad project)](https://github.com/tmk/HHKB_controller) and see [Controller Distribution thread](http://geekhack.org/index.php?topic=56494.0) if you get an assembled one.


###2. PJRC Teensy
See [this thread](http://geekhack.org/index.php?topic=57008.0).


###3. V-USB version
See [V-USB controller for HHKB](doc/V-USB.md).


[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
[V-USB]: http://www.obdev.at/products/vusb/index.html