mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/keyboardio/model01/rules.mk

36 lines
1.2 KiB
Makefile
Raw Normal View History

Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links
2018-09-18 00:49:20 +02:00
# MCU name
MCU = atmega32u4
Cleanup rules.mk for 32U4 keyboards, L-M (#7120) * Cleanup rules.mk for 32U4 keyboards, L-M * Move some stuff to keyboard level
2019-10-24 22:50:13 +02:00
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links
2018-09-18 00:49:20 +02:00
BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)
2020-01-30 19:47:48 +01:00
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links
2018-09-18 00:49:20 +02:00
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)
2020-01-30 19:47:48 +01:00
MIDI_ENABLE = no # MIDI support
Keyboard: add Keyboardio Model 01 (#3900) * Keyboard: add Keyboardio Model01 This port implements key scanning and everything in their default keymap. It doesn't implement mouse warping; QMK can't do that (yet). LED control is mostly not implemented. The ability to set all LEDs is included because they can get stuck on coming from the bootloader otherwise. Single LED control is also implemented for numpad indication. The scanners also support batch LED transfer which is what you'd need if you wanted to do fast effects. Gamma correction is also not implemented, but is present in the original firmware. The necessary info for further implementation is in the KeyboardioScanner module for Kaleidoscope. To install on your keyboard: make model01:avrdude When prompted, hold the "prog" key on the keyboard to put it into programming mode. This can also be achieved by holding the "prog" key while plugging in the keyboard. This works even if the firmware is corrupt or missing. Hot plugging the halves seems to work fine, but there is no explicit support for eg. making sure the matrix scan rate is reconfigured. * model01: clean up includes and include guards Uses #pragma once everywhere. * model01: split LED and matrix code This makes space if someone wants to implement better LED support later on, the keyboard is a lot more capable than the current code. * model01: separate I2C timeouts for matrix vs. LED If the scanners have no data they don't ACK reads and just time out. So we want a pretty short timeout to keep scan rates high. Meanwhile the LED transfers might take longer - I don't know though, so here we are conservative. * model01: implement better LED control - gamma correction from the manufacturer's firmware - suitable delays to allow back to back LED writes - this is fast enough to write the whole keyboard without noticeable delay, in my experience - minor bug fix: RHS Fn key was not addressable * model01: add license to wire-protocol-constants.h * model01: replace gamma LUT The original was of unclear license origin. This one is functionally identical and includes a generator should people wish to adjust it. * model01: use the already-present CIE1931 lightness curve ...rather than baking in another gamma curve. It's said that CIE1931 is the right thing to be using rather than gamma. OK. Let it be so. * model01: call matrix_init_user() from matrix_init_kb() * model01: remove inapplicable config options from rules.mk * model01: readme.md: update build environment links
2018-09-18 00:49:20 +02:00
UNICODE_ENABLE = no # Unicode
CUSTOM_MATRIX = yes
Cleanup rules.mk for 32U4 keyboards, L-M (#7120) * Cleanup rules.mk for 32U4 keyboards, L-M * Move some stuff to keyboard level
2019-10-24 22:50:13 +02:00
QUANTUM_LIB_SRC += i2c_master.c
SRC += leds.c \
matrix.c
Keyboard: keyboardio model01: rgbmatrix support (#3989) * model01: implement RGB matrix feature LEDs can still be individually controlled if this is switched off. * model01: use fast banked LED setting commands * model01: update default keymap to use RGB matrix * model01: update RGB matrix support to match common_features.mk * rgb_matrix: include <string.h> This was missing after commit 4d5705ea6ceeb11cd2adc018644ec87c51af4e86 which introduces a use of memset(). * model01: make g_rgb_leds weak This allows users to override which LEDs are configured as modifiers, or tweak the x/y coordinates, should they so choose.
2018-09-28 05:53:36 +02:00
# You can set RGB_MATRIX_ENABLE = no in your rules.mk to disable this and save the Flash
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)
2020-01-30 19:47:48 +01:00
RGB_MATRIX_ENABLE = custom # Enable RGB matrix effects.
Reference in a new issue Copy permalink