qmk_sweep_skeletyl/keyboards/bastardkb/charybdis/4x6/v2/stemcell/config.h

61 lines
1.8 KiB
C
Raw Normal View History

[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ F4, F7, C6, D4, B5 }
[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
#define MATRIX_COL_PINS \
{ F6, F5, B6, D7, E6, B4 }
[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the adapter PCB.
[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
// #define A0 PAL_LINE(GPIOA, 0)
// #define SPLIT_HAND_PIN A0
// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
/* RGB settings. */
#define RGB_DI_PIN D3
#define WS2812_PWM_DRIVER PWMD2
#define WS2812_PWM_CHANNEL 4
#define WS2812_PWM_PAL_MODE 1
#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
#define WS2812_DMA_CHANNEL 3
[keyboard] bastardkb: restructure folder hierarchy (#16778) * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 11:11:28 +02:00
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* SPI config for pmw3360 sensor. */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN B1
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN B2
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN B3
#define SPI_MISO_PAL_MODE 5
/* PMW3360 settings. */
#define A1 PAL_LINE(GPIOA, 1)
#define POINTING_DEVICE_CS_PIN A1
#define PMW3360_CS_MODE 3
#define PMW3360_CS_DIVISOR 64