qmk_sweep_skeletyl/tmk_core/common/eeconfig.c

196 lines
4.7 KiB
C
Raw Normal View History

#include <stdint.h>
#include <stdbool.h>
Add ChibiOS support for QMK (#465) * Modularity and gcc warnings fixes. * Add ChibiOS support (USB stack + support files). * Make usb_main more USB_DRIVER #define independent. * Move chibios to tool. * Implement jump-to-bootloader. * Small updates. * Fix bootloader-jump compiling. * Move AVR specific sleep_led.c into avr. * Add basic sleep_led for chibios. * Update chibios README. * NKRO fixes. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Add ARM Teensies bootloader code. * Fix chibios/usb_main GET_REPORT handing. * Add missing #include to keymap.c. * Make bootmagic.c code portable (_delay_ms -> wait_ms). * Move declaration of keymap_config. Should really not declare variables in .h files - since it's included in different .c files, a proper linker then complains that the same variable is declared more than once (once for each .c file that the offending .h is included in). * Add eeprom support for chibios/kinetis. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Chibios: use WFI in idle. WIP suspend stuff. * ChibiOS/kinetis: sending remote wakeup. * ChibiOS/STM32: send remote wakeup. * Fix report size of boot protocol. * Fix drop key stroke Keyboard report should be checked if its transfer finishs successfully. Otherwise key stroke can be missing when other key event occurs before the last report transfer is done. Boot protocol 10ms interval probably causes this problem in case it receives key events in a row within the period. NKRO protocol suffers less or nothing due to its interval 1ms. * Chibios/usb_main: rename a variable for clarity. * Add correct chibios/bootloader_jump for infinity KB. * ChibiOS: make reset request more CMSISy. * Chibios: Add breathing sleep LED on Kinetis MCUs. * ChibiOS: Update infinity bootloader code to match updated ChibiOS. * ChibiOS: prettify/document sleep_led code. * Chibios: Remove the wait in the main loop. * Add maple mini code. * Do timeout when writing to CONSOLE EP queue. Fixes TMK bug #266. * Chibios: add 'core/protocol' to the makefiles' search path. * Chibios: Update to new USB API. * Chibios: add more guards for transmitting (fix a deadlock bug). * Add update for chibios in README * Chibios: Fix a HardFault bug (wait after start). * Chibios: cleanup usb_main code. * Chibios: Revert common.mk change (fix AVR linking problem). * core: Fix chibios user compile options Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS. * Sysv format for ChibiOS arm-none-eabi-size Some new patches to ChibiOS puts heap as it's own section. So the berkeley format is now useless, as the heap will be included in the BSS report. The sysv format displays the bss size correctly. * Fix hard-coded path of CHIBIOS * Add support for new version of ChibiOS and Contrib The Kinetis support has moved to a separate Contrib repository in the newest version of Chibios. There has also been some structure changes. So this adds support for those, while maintaining back- wards compability. * Update ChibiOS instructions * Chibios: implement sleep LED for STM32. * Chibios: Update the main chibios README. * Chibios: fix STM32_BOOTLOADER_ADDRESS name. * Chibios: make the default bootloader_jump redefinable (weak). * Chibios: disable LTO (link-time optimisation). With LTO enabled, sometimes things fail for mysterious reasons (e.g. bootloader jump on WF with LEDs enabled), just because the linker optimisation is too aggressive. * Chibios: add default location for chibios-contrib. * ChibiOS: update mk to match chibios/master. * ChibiOS: update instructions.md. * Add chibi_onekey example. * Add comments to chibi_onekey Makefile. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Add Teensy LC onekey example. * Chibios: use WFI in idle. WIP suspend stuff. * Update chibi/teensy instructions. * Update chibios/Teensy instructions. * Add infinity_chibios * Add keymap_hasu.c * Infinity_chibios: select correct bootloader_jump. * Infinity_chibios: improve comments. * Add generic STM32F103C8T6 example. * Add maple mini code. * STM32F103x fixes. * Add maple mini pinout pic. * Chibios: updates for 3.0.4 git. * Chibios: rename example stm32_onekey -> stm32_f072_onekey. * Chibios: add makefiles for Teensy 3.x examples. * Chibios: update Teensy 3.x instructions. * Chibios: Tsy LC is cortex-m0plus. * Chibios: add more guards for transmitting (fix a deadlock bug). * Change README for chibios * Chibios: update examples to current chibios git. Match the changes in mainline chibios: - update chconf.h - update supplied ld scripts structure - update Teensy instructions (switch to official chibios and introduce contrib) * Add ChibiOS and ChibiOS-Contrib submodules Also fix the makefile path for them. * Moves chibios keyboards to keyboards folder * First version of ChibiOS compilation Only the stm32_f072_onkey keyboard is ported at the moment. It compiles, but still doesn't link. * More chibios fixes It now compiles without warnings and links * Move the teensy_lc_onekey to the keyboards folder * Clean up the make file rule structure * Remove keymap_fn_to_action * Update more ChibiOS keyboards to QMK Most of them does not compile at the moment though. * Use older version of Chibios libraries The newest ones have problems with compilation * Remove USB_UNCONFIGURED event It isn't present in the older version of ChibiOS * Fix the infinity_chibios compilation * Fix potentially uninitialized variable * Add missing include * Fix the ChibiOS makefile * Fix some Chibios keyboard compilation * Revert the rules.mk file back to master version * Combine the chibios and AVR makefiles With just the required overrides in the respective platform specific one. * Slight makefile restrucuring Platform specific compiler options * Move avr specific targets out of the main rules * Fix ChibiOS objcopy The ChibiOS objcopy needs different parameters, so the parameters are moved to the corresponding platform rule file * Fix the objcopy for real this time The comands were moved around, so chibios used avr and the ohter way around. Also change the objsize output format * Fix the thumb flags * Fix the infinity hasu keymap * Per platform cpp flags * Add gcc-arm-none-eabi package to travis * Add arm-none-eabi-newlib to travis * Fix the name of the libnewlib-arm-none-eabi lib * Fix the ChibiOS paths So that they are properly relative, and builds don't generate extra folders * Fix the board path of stm32_f103_onekey * Only consider folders with Makefiles as subproject
2016-07-01 16:04:53 +02:00
#include "eeprom.h"
#include "eeconfig.h"
#ifdef STM32_EEPROM_ENABLE
#include "hal.h"
#include "eeprom_stm32.h"
#endif
extern uint32_t default_layer_state;
/** \brief eeconfig enable
*
* FIXME: needs doc
*/
__attribute__ ((weak))
void eeconfig_init_user(void) {
// Reset user EEPROM value to blank, rather than to a set value
eeconfig_update_user(0);
}
__attribute__ ((weak))
void eeconfig_init_kb(void) {
// Reset Keyboard EEPROM value to blank, rather than to a set value
eeconfig_update_kb(0);
eeconfig_init_user();
}
/*
* FIXME: needs doc
*/
void eeconfig_init_quantum(void) {
#ifdef STM32_EEPROM_ENABLE
EEPROM_Erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
eeprom_update_byte(EECONFIG_DEBUG, 0);
eeprom_update_byte(EECONFIG_DEFAULT_LAYER, 0);
default_layer_state = 0;
eeprom_update_byte(EECONFIG_KEYMAP_LOWER_BYTE, 0);
eeprom_update_byte(EECONFIG_KEYMAP_UPPER_BYTE, 0);
eeprom_update_byte(EECONFIG_MOUSEKEY_ACCEL, 0);
eeprom_update_byte(EECONFIG_BACKLIGHT, 0);
eeprom_update_byte(EECONFIG_AUDIO, 0xFF); // On by default
eeprom_update_dword(EECONFIG_RGBLIGHT, 0);
eeprom_update_byte(EECONFIG_STENOMODE, 0);
eeprom_update_dword(EECONFIG_HAPTIC, 0);
Velocikey: Match RGB animation speed to typing speed (#3754) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Experimental LED support (untested) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Added documentation * Renamed feature to velocikey * Reverted readme to original state * Correct the readme title * Updated feature name in the docs * Update EECONFIG name * Add compile-time toggles for velocikey * Update feature documentation * Revert "Merge branch 'led-support' into master" This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing changes made to df111a55b9d4929182e16108b1c0ead15b16df97. * Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE * Rename decay_task function to decelerate * Apply suggestions from code review Co-Authored-By: chrislewisdev <chris@chrislewisdev.com> * Re-order eeconfig definitions * Apply coding conventions * Apply #ifdef check in lufa.c * Refactored interval time checks into one functionc * Small rename * Fix unused function error for layouts not using all rgb effects * Only update EEPROM if Velocikey is enabled * Incorporate code review feedback * Small adjustment to top-end decay rate * Add Velocikey documentation to table of contents * Bring tetris:default keymap size down by disabling audio
2019-02-21 16:22:46 +01:00
eeprom_update_byte(EECONFIG_VELOCIKEY, 0);
eeprom_update_dword(EECONFIG_RGB_MATRIX, 0);
eeprom_update_byte(EECONFIG_RGB_MATRIX_SPEED, 0);
eeconfig_init_kb();
}
/** \brief eeconfig initialization
*
* FIXME: needs doc
*/
void eeconfig_init(void) {
eeconfig_init_quantum();
}
/** \brief eeconfig enable
*
* FIXME: needs doc
*/
void eeconfig_enable(void)
{
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
}
/** \brief eeconfig disable
*
* FIXME: needs doc
*/
void eeconfig_disable(void)
{
#ifdef STM32_EEPROM_ENABLE
EEPROM_Erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER_OFF);
}
/** \brief eeconfig is enabled
*
* FIXME: needs doc
*/
bool eeconfig_is_enabled(void)
{
return (eeprom_read_word(EECONFIG_MAGIC) == EECONFIG_MAGIC_NUMBER);
}
/** \brief eeconfig is disabled
*
* FIXME: needs doc
*/
bool eeconfig_is_disabled(void)
{
return (eeprom_read_word(EECONFIG_MAGIC) == EECONFIG_MAGIC_NUMBER_OFF);
}
/** \brief eeconfig read debug
*
* FIXME: needs doc
*/
uint8_t eeconfig_read_debug(void) { return eeprom_read_byte(EECONFIG_DEBUG); }
/** \brief eeconfig update debug
*
* FIXME: needs doc
*/
void eeconfig_update_debug(uint8_t val) { eeprom_update_byte(EECONFIG_DEBUG, val); }
/** \brief eeconfig read default layer
*
* FIXME: needs doc
*/
uint8_t eeconfig_read_default_layer(void) { return eeprom_read_byte(EECONFIG_DEFAULT_LAYER); }
/** \brief eeconfig update default layer
*
* FIXME: needs doc
*/
void eeconfig_update_default_layer(uint8_t val) { eeprom_update_byte(EECONFIG_DEFAULT_LAYER, val); }
/** \brief eeconfig read keymap
*
* FIXME: needs doc
*/
uint16_t eeconfig_read_keymap(void) {
return ( eeprom_read_byte(EECONFIG_KEYMAP_LOWER_BYTE) | (eeprom_read_byte(EECONFIG_KEYMAP_UPPER_BYTE) << 8) );
}
/** \brief eeconfig update keymap
*
* FIXME: needs doc
*/
void eeconfig_update_keymap(uint16_t val) {
eeprom_update_byte(EECONFIG_KEYMAP_LOWER_BYTE, val & 0xFF);
eeprom_update_byte(EECONFIG_KEYMAP_UPPER_BYTE, ( val >> 8 ) & 0xFF );
}
/** \brief eeconfig read backlight
*
* FIXME: needs doc
*/
uint8_t eeconfig_read_backlight(void) { return eeprom_read_byte(EECONFIG_BACKLIGHT); }
/** \brief eeconfig update backlight
*
* FIXME: needs doc
*/
void eeconfig_update_backlight(uint8_t val) { eeprom_update_byte(EECONFIG_BACKLIGHT, val); }
2016-04-16 05:38:21 +02:00
/** \brief eeconfig read audio
*
* FIXME: needs doc
*/
2016-04-16 05:38:21 +02:00
uint8_t eeconfig_read_audio(void) { return eeprom_read_byte(EECONFIG_AUDIO); }
/** \brief eeconfig update audio
*
* FIXME: needs doc
*/
void eeconfig_update_audio(uint8_t val) { eeprom_update_byte(EECONFIG_AUDIO, val); }
/** \brief eeconfig read kb
*
* FIXME: needs doc
*/
uint32_t eeconfig_read_kb(void) { return eeprom_read_dword(EECONFIG_KEYBOARD); }
/** \brief eeconfig update kb
*
* FIXME: needs doc
*/
void eeconfig_update_kb(uint32_t val) { eeprom_update_dword(EECONFIG_KEYBOARD, val); }
/** \brief eeconfig read user
*
* FIXME: needs doc
*/
uint32_t eeconfig_read_user(void) { return eeprom_read_dword(EECONFIG_USER); }
/** \brief eeconfig update user
*
* FIXME: needs doc
*/
void eeconfig_update_user(uint32_t val) { eeprom_update_dword(EECONFIG_USER, val); }
uint32_t eeconfig_read_haptic(void) { return eeprom_read_dword(EECONFIG_HAPTIC); }
/** \brief eeconfig update user
*
* FIXME: needs doc
*/
void eeconfig_update_haptic(uint32_t val) { eeprom_update_dword(EECONFIG_HAPTIC, val); }