qmk_sweep_skeletyl/keyboards/fjlabs/polaris/readme.md

# Polaris-Compatible Hotswap and Solder PCB's

The following is the QMK Firmware for the Polaris-Compatible Hotswap and Solder PCB's developed by FJLaboratories (FJLabs).

* Keyboard Maintainer: [mrnoisytiger (FJLabs)](https://github.com/mrnoisytiger)
* Hardware Supported: Polaris Hotswap and Solder
 
Make example for this keyboard (after setting up your build environment):

    make fjlabs/polaris:default


See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.
[Keyboard] Added FJLabs Polaris (#12746) Co-authored-by: Drashna Jaelre <drashna@live.com> 2021-05-14 06:10:09 +02:00			`# Polaris-Compatible Hotswap and Solder PCB's`

			`The following is the QMK Firmware for the Polaris-Compatible Hotswap and Solder PCB's developed by FJLaboratories (FJLabs).`
FJLabs Polaris Layout Additions and Touch-Up (#20622) * add matrix_diagram.md * refactor keymaps * fix Configurator implementation The original C-based code had an off-by-one error in the key sequence, that was then converted in data-driven configurator without being corrected. * info.json: apply friendly formatting * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_ansi * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_ansi_tsangan * add LAYOUT_60_iso_split_bs_rshift * add LAYOUT_60_iso * add LAYOUT_60_iso_tsangan_split_bs_rshift * add LAYOUT_60_iso_tsangan * enable Community Layout support * edit keyboard maintainer 2023-04-29 19:44:07 +02:00
			`* Keyboard Maintainer: [mrnoisytiger (FJLabs)](https://github.com/mrnoisytiger)`
[Keyboard] Added FJLabs Polaris (#12746) Co-authored-by: Drashna Jaelre <drashna@live.com> 2021-05-14 06:10:09 +02:00			`* Hardware Supported: Polaris Hotswap and Solder`

			`Make example for this keyboard (after setting up your build environment):`

			`make fjlabs/polaris:default`


			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

FJLabs Polaris Layout Additions and Touch-Up (#20622) * add matrix_diagram.md * refactor keymaps * fix Configurator implementation The original C-based code had an off-by-one error in the key sequence, that was then converted in data-driven configurator without being corrected. * info.json: apply friendly formatting * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_ansi * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_ansi_tsangan * add LAYOUT_60_iso_split_bs_rshift * add LAYOUT_60_iso * add LAYOUT_60_iso_tsangan_split_bs_rshift * add LAYOUT_60_iso_tsangan * enable Community Layout support * edit keyboard maintainer 2023-04-29 19:44:07 +02:00			`Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.`