mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/s7_elephant/readme.md

21 lines
1.1 KiB
Markdown
Raw Normal View History

Add support for S7 Elephant (#4511) * Add support for S7 Elephant A high-end 70% custom keyboard designed and produced by jacky from Geekhack. * Polish S7 Elephant code Implement drashna's suggestions: - specify bootloader - remove unnecessary defines - use led_set_user() for LED logic * Correct info.json and s7_elephant.h Correct info.json and s7_elepant.h to follow QMK convention and fix a missing curly bracket.
2018-12-01 17:57:30 +01:00
# S7 Elephant
![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg)
A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
[Keyboard] Add S7 Elephant Rev2 Support (#9398) * Add S7 Elephant Rev2 Support * Apply suggestions from code review I tested the changes on my board as well, thanks for the suggestions! * Added a default folder in the makefile so that this would no longer be a breaking change
2020-06-14 08:39:57 +02:00
**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board.
* Keyboard Maintainer: QMK Community
* Hardware Supported: S7 Elephant rev1, rev2
* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)
Add support for S7 Elephant (#4511) * Add support for S7 Elephant A high-end 70% custom keyboard designed and produced by jacky from Geekhack. * Polish S7 Elephant code Implement drashna's suggestions: - specify bootloader - remove unnecessary defines - use led_set_user() for LED logic * Correct info.json and s7_elephant.h Correct info.json and s7_elepant.h to follow QMK convention and fix a missing curly bracket.
2018-12-01 17:57:30 +01:00
Make example for this keyboard (after setting up your build environment):
[Keyboard] Add S7 Elephant Rev2 Support (#9398) * Add S7 Elephant Rev2 Support * Apply suggestions from code review I tested the changes on my board as well, thanks for the suggestions! * Added a default folder in the makefile so that this would no longer be a breaking change
2020-06-14 08:39:57 +02:00
make s7_elephant/rev1:default # 2018 run
make s7_elephant/rev2:default # 2019 run
Add support for S7 Elephant (#4511) * Add support for S7 Elephant A high-end 70% custom keyboard designed and produced by jacky from Geekhack. * Polish S7 Elephant code Implement drashna's suggestions: - specify bootloader - remove unnecessary defines - use led_set_user() for LED logic * Correct info.json and s7_elephant.h Correct info.json and s7_elepant.h to follow QMK convention and fix a missing curly bracket.
2018-12-01 17:57:30 +01:00
To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Reference in a new issue Copy permalink