qmk_sweep_skeletyl/keyboards/ydkb/just60/readme.md

# Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.

Backlight LEDs and Bluetooth are not working yet.

* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer)
* Hardware Supported: Just60 (atmega32u4)
* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249

Make example for this keyboard (after setting up your build environment):

    make ydkb/just60:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] add Just60 keyboard (#7752) * [Keyboard] add Just60 keyboard * [Keyboard] just60: fixes per suggestions * Update keyboards/just60/rules.mk * Update keyboards/just60/readme.md * Update keyboards/just60/rules.mk * [Keyboard] just60: add keymap specific bootloader * Revert "[Keyboard] just60: add keymap specific bootloader" This reverts commit 0357e0a6f40233eec43f42c32fb405f60e7fbb1c. 2020-01-02 07:28:05 +01:00			`# Just60`

			`Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.`

			To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.

			`Backlight LEDs and Bluetooth are not working yet.`

			`* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer)`
			`* Hardware Supported: Just60 (atmega32u4)`
			`* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249`

			`Make example for this keyboard (after setting up your build environment):`

move @yangdigi 's keyboards to a YDKB folder (#15681) 2022-01-02 09:07:01 +01:00			`make ydkb/just60:default`
[Keyboard] add Just60 keyboard (#7752) * [Keyboard] add Just60 keyboard * [Keyboard] just60: fixes per suggestions * Update keyboards/just60/rules.mk * Update keyboards/just60/readme.md * Update keyboards/just60/rules.mk * [Keyboard] just60: add keymap specific bootloader * Revert "[Keyboard] just60: add keymap specific bootloader" This reverts commit 0357e0a6f40233eec43f42c32fb405f60e7fbb1c. 2020-01-02 07:28:05 +01:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`