mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

[Keyboard] Nebula12 keyboard (#9397)

Browse source 
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit is contained in:
yiancar 2020-06-18 06:16:26 +01:00 committed by GitHub
parent 67f374029d
commit 3e27ceee42
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
20 changed files with 3839 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

268
keyboards/nebula12/boards/ST_STM32F072B_DISCOVERY/board.c Normal file
View file

@ -0,0 +1,268 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

940
keyboards/nebula12/boards/ST_STM32F072B_DISCOVERY/board.h Normal file
View file

@ -0,0 +1,940 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

5
keyboards/nebula12/boards/ST_STM32F072B_DISCOVERY/board.mk Normal file
View file

@ -0,0 +1,5 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

703
keyboards/nebula12/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg Normal file
View file

@ -0,0 +1,703 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

7
keyboards/nebula12/bootloader_defs.h Normal file
View file

@ -0,0 +1,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

714
keyboards/nebula12/chconf.h Normal file
View file

@ -0,0 +1,714 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file rt/templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
#define _CHIBIOS_RT_CONF_VER_6_0_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 10000
#endif
/**
* @brief Time intervals data size.
* @note Allowed values are 16, 32 or 64 bits.
*/
#if !defined(CH_CFG_INTERVALS_SIZE)
#define CH_CFG_INTERVALS_SIZE 32
#endif
/**
* @brief Time types data size.
* @note Allowed values are 16 or 32 bits.
*/
#if !defined(CH_CFG_TIME_TYPES_SIZE)
#define CH_CFG_TIME_TYPES_SIZE 32
#endif
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 2
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#if !defined(CH_CFG_TIME_QUANTUM)
#define CH_CFG_TIME_QUANTUM 0
#endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
#endif
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
#endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
#endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
#endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
#endif
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
#endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
#endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
#endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
#endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
#endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
#endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
#endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
#endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
#endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP FALSE
#endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS FALSE
#endif
/**
* @brief Objects FIFOs APIs.
* @details If enabled then the objects FIFOs APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_OBJ_FIFOS)
#define CH_CFG_USE_OBJ_FIFOS FALSE
#endif
/**
* @brief Pipes APIs.
* @details If enabled then the pipes APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_PIPES)
#define CH_CFG_USE_PIPES FALSE
#endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Objects factory options
* @{
*/
/*===========================================================================*/
/**
* @brief Objects Factory APIs.
* @details If enabled then the objects factory APIs are included in the
* kernel.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_CFG_USE_FACTORY)
#define CH_CFG_USE_FACTORY FALSE
#endif
/**
* @brief Maximum length for object names.
* @details If the specified length is zero then the name is stored by
* pointer but this could have unintended side effects.
*/
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
#endif
/**
* @brief Enables the registry of generic objects.
*/
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
#endif
/**
* @brief Enables factory for generic buffers.
*/
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
#endif
/**
* @brief Enables factory for semaphores.
*/
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
#define CH_CFG_FACTORY_SEMAPHORES FALSE
#endif
/**
* @brief Enables factory for mailboxes.
*/
#if !defined(CH_CFG_FACTORY_MAILBOXES)
#define CH_CFG_FACTORY_MAILBOXES FALSE
#endif
/**
* @brief Enables factory for objects FIFOs.
*/
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
#endif
/**
* @brief Enables factory for Pipes.
*/
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
#define CH_CFG_FACTORY_PIPES FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
#endif
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
#endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS FALSE
#endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS FALSE
#endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#if !defined(CH_DBG_TRACE_MASK)
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
#endif
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
#define CH_DBG_TRACE_BUFFER_SIZE 128
#endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK FALSE
#endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS FALSE
#endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief System structure extension.
* @details User fields added to the end of the @p ch_system_t structure.
*/
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief System initialization hook.
* @details User initialization code added to the @p chSysInit() function
* just before interrupts are enabled globally.
*/
#define CH_CFG_SYSTEM_INIT_HOOK() { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p _thread_init() function.
*
* @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

169
keyboards/nebula12/config.h Executable file
View file

@ -0,0 +1,169 @@
/*
Copyright 2020 Yiancar
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x8968
#define PRODUCT_ID 0x5337
#define DEVICE_VER 0x0001
#define MANUFACTURER Yiancar-Designs
#define PRODUCT NEBULA12
#define DESCRIPTION "A 12-key, tool-free RGB keyboard"
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 3
#define MATRIX_ROW_PINS { A8, C15, A0, A1 }
#define MATRIX_COL_PINS { A9, C13, C14 }
// To enable debugger set A13 A14 -> A5 A7
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Setting up 400KHz I2C Clock for a 48MHz system clock */
#define I2C1_SCL_PAL_MODE 1
#define I2C1_SDA_PAL_MODE 1
#define I2C1_TIMINGR_SCLDEL 3U
#define I2C1_TIMINGR_SDADEL 1U
#define I2C1_TIMINGR_SCLH 3U
#define I2C1_TIMINGR_SCLL 9U
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
#define WS2812_SPI SPID2 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
#define RGB_DI_PIN B15
#ifdef RGB_DI_PIN
#define RGBLED_NUM 4
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_ANIMATIONS
#endif
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
/* Backlight options */
#define RGB_BACKLIGHT_ENABLED 1
#define RGB_BACKLIGHT_NEBULA12
// they aren't really used if RGB_BACKLIGHT_NEBULA65 defined
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define RGB_BACKLIGHT_BRIGHTNESS 255
// the default effect (RGB test)
#define RGB_BACKLIGHT_EFFECT 6
// the default effect speed (0-3)
#define RGB_BACKLIGHT_EFFECT_SPEED 0
// the default color1 and color2
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 1
#define DRIVER_LED_TOTAL 16
// These define which keys in the matrix are alphas/mods
// Used for backlight effects so colors are different for
// alphas vs. mods
// Each value is for a row, bit 0 is column 0
// Alpha=0 Mod=1
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000
#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE

525
keyboards/nebula12/halconf.h Normal file
View file

@ -0,0 +1,525 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef HALCONF_H
#define HALCONF_H
#define _CHIBIOS_HAL_CONF_
#define _CHIBIOS_HAL_CONF_VER_7_0_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the cryptographic subsystem.
*/
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
#define HAL_USE_CRY FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT TRUE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C TRUE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SIO subsystem.
*/
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
#define HAL_USE_SIO FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI TRUE
#endif
/**
* @brief Enables the TRNG subsystem.
*/
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
#define HAL_USE_TRNG FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/**
* @brief Enables the WSPI subsystem.
*/
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
#define HAL_USE_WSPI FALSE
#endif
/*===========================================================================*/
/* PAL driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
#define PAL_USE_CALLBACKS FALSE
#endif
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
#define PAL_USE_WAIT FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/**
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
*/
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
#define CAN_ENFORCE_USE_CALLBACKS FALSE
#endif
/*===========================================================================*/
/* CRY driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the SW fall-back of the cryptographic driver.
* @details When enabled, this option, activates a fall-back software
* implementation for algorithms not supported by the underlying
* hardware.
* @note Fall-back implementations may not be present for all algorithms.
*/
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
#define HAL_CRY_USE_FALLBACK FALSE
#endif
/**
* @brief Makes the driver forcibly use the fall-back implementations.
*/
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
#define HAL_CRY_ENFORCE_FALLBACK FALSE
#endif
/*===========================================================================*/
/* DAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
#define DAC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define DAC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the zero-copy API.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/**
* @brief OCR initialization constant for V20 cards.
*/
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
#define SDC_INIT_OCR_V20 0x50FF8000U
#endif
/**
* @brief OCR initialization constant for non-V20 cards.
*/
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
#define SDC_INIT_OCR 0x80100000U
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/**
* @brief Serial over USB number of buffers.
* @note The default is 2 buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_NUMBER 2
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables circular transfers APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
#define SPI_USE_CIRCULAR FALSE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/**
* @brief Handling method for SPI CS line.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#endif
/*===========================================================================*/
/* UART driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
#define UART_USE_WAIT FALSE
#endif
/**
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define UART_USE_MUTUAL_EXCLUSION FALSE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
/*===========================================================================*/
/* WSPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
#define WSPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define WSPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* HALCONF_H */
/** @} */

14
keyboards/nebula12/info.json Executable file
View file

@ -0,0 +1,14 @@
{
"keyboard_name": "NEBULA12",
"url": "",
"maintainer": "yiancar",
"width": 3,
"height": 4,
"layouts": {
"LAYOUT_68_ansi": {
"layout": [
{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}
]
}
}
}

42
keyboards/nebula12/keymaps/default/keymap.c Executable file
View file

@ -0,0 +1,42 @@
/* Copyright 2020 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_all( /* Base */
KC_P7, KC_P8, KC_P9,
KC_P4, KC_P5, KC_P6,
KC_P1, KC_P2, KC_P3,
MO(1), KC_P0, KC_PDOT),
[1] = LAYOUT_all( /* FN */
RGB_TOG, RGB_MOD, KC_TRNS,
EF_DEC, EF_INC, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_PENT),
[2] = LAYOUT_all( /* Empty for dynamic keymaps */
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS),
[3] = LAYOUT_all( /* Empty for dynamic keymaps */
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS),
};

7
keyboards/nebula12/keymaps/default/readme.md Executable file
View file

@ -0,0 +1,7 @@
# The default keymap for Nebula12. VIA support disabled.
![Layer 0](https://i.imgur.com/CoMteJW.png)
![Layer 1](https://i.imgur.com/LbIPiJj.png)
The full RGB control does not fit due to the small number of keys. Using VIA might be a good idea!

42
keyboards/nebula12/keymaps/via/keymap.c Executable file
View file

@ -0,0 +1,42 @@
/* Copyright 2020 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_all( /* Base */
KC_P7, KC_P8, KC_P9,
KC_P4, KC_P5, KC_P6,
KC_P1, KC_P2, KC_P3,
MO(1), KC_P0, KC_PDOT),
[1] = LAYOUT_all( /* FN */
RGB_TOG, RGB_MOD, KC_TRNS,
EF_DEC, EF_INC, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_PENT),
[2] = LAYOUT_all( /* Empty for dynamic keymaps */
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS),
[3] = LAYOUT_all( /* Empty for dynamic keymaps */
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS),
};

5
keyboards/nebula12/keymaps/via/readme.md Executable file
View file

@ -0,0 +1,5 @@
# The default keymap for Nebula12. VIA support enabled.
![Layer 0](https://i.imgur.com/CoMteJW.png)
![Layer 1](https://i.imgur.com/LbIPiJj.png)

1
keyboards/nebula12/keymaps/via/rules.mk Executable file
View file

@ -0,0 +1 @@
VIA_ENABLE = yes

176
keyboards/nebula12/mcuconf.h Normal file
View file

@ -0,0 +1,176 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
/*
* STM32F0xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 3...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F0xx_MCUCONF
// #define STM32F070xB
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE
#define STM32_HSI14_ENABLED TRUE
#define STM32_HSI48_ENABLED FALSE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
#define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 12
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE STM32_PPRE_DIV1
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_USBSW STM32_USBSW_HSI48
#define STM32_CECSW STM32_CECSW_HSI
#define STM32_I2C1SW STM32_I2C1SW_HSI
#define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_RTCSEL STM32_RTCSEL_LSI
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 TRUE
#define STM32_GPT_USE_TIM14 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 TRUE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
#define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 TRUE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 2
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
#endif /* _MCUCONF_H_ */

20
keyboards/nebula12/nebula12.c Executable file
View file

@ -0,0 +1,20 @@
/* Copyright 2020 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef RGB_BACKLIGHT_NEBULA12
#error RGB_BACKLIGHT_NEBULA12 not defined, recheck config.h
#endif
#include "nebula12.h"

35
keyboards/nebula12/nebula12.h Executable file
View file

@ -0,0 +1,35 @@
/* Copyright 2020 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define XXX KC_NO
#include "quantum.h"
#include "../wilba_tech/wt_rgb_backlight_keycodes.h"
// This a shortcut to help you visually see your layout.
#define LAYOUT_all( \
K00, K01, K02, \
K10, K11, K12, \
K20, K21, K22, \
K30, K31, K32 \
) { \
{ K00, K01, K02, }, \
{ K10, K11, K12, }, \
{ K20, K21, K22, }, \
{ K30, K31, K32, } \
}

32
keyboards/nebula12/readme.md Executable file
View file

@ -0,0 +1,32 @@
# Nebula65
This is a standard fixed layout 12 key PCB. It supports VIA, full per-key RGB and underglow RGB.
* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
* Hardware Supported: A 65% keyboard with STM32F072CB
* Hardware Availability: https://spaceholdings.net/
## Instructions
### Build
Make example for this keyboard (after setting up your build environment):
make nebula12:via
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
### Reset
- Unplug
- Hold Escape
- Plug In
- Unplug
- Release Escape
### Flash
- Unplug
- Hold Escape
- Plug In
- Flash using QMK Toolbox or dfu-util (`make nebula12:<keymap>:dfu-util`)

34
keyboards/nebula12/rules.mk Executable file
View file

@ -0,0 +1,34 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
RGBLIGHT_ENABLE = yes # Underglow RGB
WS2812_DRIVER = spi # Underglow RGB Driver
CIE1931_CURVE = yes
# project specific files
SRC += keyboards/wilba_tech/wt_main.c \
keyboards/wilba_tech/wt_rgb_backlight.c \
drivers/issi/is31fl3731.c \
quantum/color.c
QUANTUM_LIB_SRC += drivers/chibios/i2c_master.c

109
keyboards/wilba_tech/wt_rgb_backlight.c
View file

@ -21,6 +21,7 @@
defined(RGB_BACKLIGHT_KOYU) || \ defined(RGB_BACKLIGHT_KOYU) || \
defined(RGB_BACKLIGHT_HS60) || \ defined(RGB_BACKLIGHT_HS60) || \
defined(RGB_BACKLIGHT_NK65) || \ defined(RGB_BACKLIGHT_NK65) || \
defined(RGB_BACKLIGHT_NEBULA12) || \
defined(RGB_BACKLIGHT_NEBULA65) || \ defined(RGB_BACKLIGHT_NEBULA65) || \
defined(RGB_BACKLIGHT_U80_A) || \ defined(RGB_BACKLIGHT_U80_A) || \
defined(RGB_BACKLIGHT_DAWN60) || \ defined(RGB_BACKLIGHT_DAWN60) || \
@ -44,7 +45,7 @@
#include "wt_rgb_backlight_api.h" #include "wt_rgb_backlight_api.h"
#include "wt_rgb_backlight_keycodes.h" #include "wt_rgb_backlight_keycodes.h"
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
#include <avr/interrupt.h> #include <avr/interrupt.h>
#include "drivers/avr/i2c_master.h" #include "drivers/avr/i2c_master.h"
#else #else
@ -84,6 +85,8 @@ LED_TYPE g_ws2812_leds[WS2812_LED_TOTAL];
#define BACKLIGHT_LED_COUNT 108 #define BACKLIGHT_LED_COUNT 108
#elif defined(RGB_BACKLIGHT_DAWN60) #elif defined(RGB_BACKLIGHT_DAWN60)
#define BACKLIGHT_LED_COUNT 84 //64 + 20 #define BACKLIGHT_LED_COUNT 84 //64 + 20
#elif defined(RGB_BACKLIGHT_NEBULA12)
#define BACKLIGHT_LED_COUNT 16
#else #else
#define BACKLIGHT_LED_COUNT 72 #define BACKLIGHT_LED_COUNT 72
#endif #endif
@ -358,6 +361,36 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{1, K_16, J_16, L_16}, //LB64 {1, K_16, J_16, L_16}, //LB64
}; };
#elif defined(RGB_BACKLIGHT_NEBULA12)
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
#define ISSI_ADDR_1 0x74
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, C1_1, C3_2, C4_2}, //A1
{0, C1_2, C2_2, C4_3}, //A2
{0, C1_3, C2_3, C3_3}, //A3
{0, C1_4, C2_4, C3_4}, //A4
{0, C1_5, C2_5, C3_5}, //A5
{0, C1_6, C2_6, C3_6}, //A6
{0, C1_7, C2_7, C3_7}, //A7
{0, C1_8, C2_8, C3_8}, //A8
{0, C9_1, C8_1, C7_1}, //A9
{0, C9_2, C8_2, C7_2}, //A10
{0, C9_3, C8_3, C7_3}, //A11
{0, C9_4, C8_4, C7_4}, //A12
{0, C9_5, C8_5, C7_5}, //A13
{0, C9_6, C8_6, C7_6}, //A14
{0, C9_7, C8_7, C6_6}, //A15
{0, C9_8, C7_7, C6_7}, //A16
};
#elif defined(RGB_BACKLIGHT_U80_A) #elif defined(RGB_BACKLIGHT_U80_A)
// U80-A prototype uses 3 ISSI drivers // U80-A prototype uses 3 ISSI drivers
@ -928,6 +961,21 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
//LA62..LB5 //LA62..LB5
{221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255} {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255}
}; };
#elif defined(RGB_BACKLIGHT_NEBULA12)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
// A1..A16
{0,0}, {16,0}, {32,0}, {0,16}, {16,16}, {32,16}, {0,32}, {16,32},
{255,255}, {255,255}, {255,255}, {255,255},
{32,48}, {16,48}, {0,48}, {32,32}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
// A1..A16
{72,197}, {64,194}, {56,197}, {85,74}, {64,64}, {43,74}, {171,74}, {192,64},
{255,255}, {255,255}, {255,255}, {255,255},
{200,196}, {192,192}, {184,196}, {213,74}
};
#elif defined(RGB_BACKLIGHT_NEBULA65) #elif defined(RGB_BACKLIGHT_NEBULA65)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
// LA1..LA60 // LA1..LA60
@ -951,6 +999,7 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
//LA62..LB5 //LA62..LB5
{207,255}, {213,255}, {218,255}, {35,255}, {21,255}, {19,255}, {224,255}, {32,255} {207,255}, {213,255}, {218,255}, {35,255}, {21,255}, {19,255}, {224,255}, {32,255}
}; };
#elif defined(RGB_BACKLIGHT_M6_B) #elif defined(RGB_BACKLIGHT_M6_B)
// M6-B is really simple: // M6-B is really simple:
// 0 3 5 // 0 3 5
@ -1018,7 +1067,7 @@ void map_led_to_point( uint8_t index, Point *point )
point->x = pgm_read_byte(addr); point->x = pgm_read_byte(addr);
point->y = pgm_read_byte(addr+1); point->y = pgm_read_byte(addr+1);
#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA65) #if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA65) || defined(RGB_BACKLIGHT_NEBULA12)
return; return;
#endif #endif
@ -1219,6 +1268,18 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
{ 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 }, { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 },
{ 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 } { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 }
}; };
#elif defined(RGB_BACKLIGHT_NEBULA12)
//
// A1, A2, A3,
// A4, A5, A6,
// A7, A8, A16,
// A15, A14, A13,
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
{ 1-1, 2-1, 3-1 },
{ 4-1, 5-1, 6-1 },
{ 7-1, 8-1, 16-1 },
{ 15-1, 14-1, 13-1 }
};
#elif defined(RGB_BACKLIGHT_M6_B) #elif defined(RGB_BACKLIGHT_M6_B)
// M6-B is really simple: // M6-B is really simple:
// 0 3 5 // 0 3 5
@ -1263,6 +1324,9 @@ void backlight_update_pwm_buffers(void)
IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 ); IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 );
IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
#elif defined(RGB_BACKLIGHT_NEBULA12)
IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 );
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 );
#elif defined(RGB_BACKLIGHT_U80_A) #elif defined(RGB_BACKLIGHT_U80_A)
static uint8_t driver = 0; static uint8_t driver = 0;
switch ( driver ) switch ( driver )
@ -1340,7 +1404,7 @@ void backlight_set_key_hit(uint8_t row, uint8_t column)
g_any_key_hit = 0; g_any_key_hit = 0;
} }
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
// This is (F_CPU/1024) / 20 Hz // This is (F_CPU/1024) / 20 Hz
// = 15625 Hz / 20 Hz // = 15625 Hz / 20 Hz
// = 781 // = 781
@ -1376,6 +1440,28 @@ void backlight_timer_disable(void)
{ {
TIMSK3 &= ~_BV(OCIE3A); TIMSK3 &= ~_BV(OCIE3A);
} }
#elif defined(RGB_BACKLIGHT_NEBULA12) //STM32, use GPT with TIM3. Enable in halconf.h
static void gpt_backlight_timer_task(GPTDriver *gptp);
// Timer setup at 200Khz, callback at 10k ticks = 20Hz
static GPTConfig gpt3cfg1 = {
.frequency = 200000U,
.callback = gpt_backlight_timer_task
};
void backlight_timer_init(void)
{
gptStart(&GPTD3, &gpt3cfg1);
}
void backlight_timer_enable(void)
{
gptStartContinuous(&GPTD3, 10000);
}
void backlight_timer_disable(void)
{
gptStopTimer(&GPTD3);
}
#else //STM32, use GPT with TIM4. Enable in halconf.h #else //STM32, use GPT with TIM4. Enable in halconf.h
static void gpt_backlight_timer_task(GPTDriver *gptp); static void gpt_backlight_timer_task(GPTDriver *gptp);
// Timer setup at 200Khz, callback at 10k ticks = 20Hz // Timer setup at 200Khz, callback at 10k ticks = 20Hz
@ -1398,7 +1484,7 @@ void backlight_timer_disable(void)
{ {
gptStopTimer(&GPTD4); gptStopTimer(&GPTD4);
} }
#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) #endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA12)
void backlight_set_suspend_state(bool state) void backlight_set_suspend_state(bool state)
{ {
@ -1635,7 +1721,7 @@ void backlight_effect_cycle_all(void)
for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{ {
uint16_t offset2 = g_key_hit[i]<<2; uint16_t offset2 = g_key_hit[i]<<2;
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
// stabilizer LEDs use spacebar hits // stabilizer LEDs use spacebar hits
if ( i == 36+6 || i == 54+13 || // LC6, LD13 if ( i == 36+6 || i == 54+13 || // LC6, LD13
( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
@ -1660,7 +1746,7 @@ void backlight_effect_cycle_left_right(void)
for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{ {
uint16_t offset2 = g_key_hit[i]<<2; uint16_t offset2 = g_key_hit[i]<<2;
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
// stabilizer LEDs use spacebar hits // stabilizer LEDs use spacebar hits
if ( i == 36+6 || i == 54+13 || // LC6, LD13 if ( i == 36+6 || i == 54+13 || // LC6, LD13
( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
@ -1687,7 +1773,7 @@ void backlight_effect_cycle_up_down(void)
for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{ {
uint16_t offset2 = g_key_hit[i]<<2; uint16_t offset2 = g_key_hit[i]<<2;
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
// stabilizer LEDs use spacebar hits // stabilizer LEDs use spacebar hits
if ( i == 36+6 || i == 54+13 || // LC6, LD13 if ( i == 36+6 || i == 54+13 || // LC6, LD13
( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
@ -1861,7 +1947,7 @@ void backlight_effect_indicators(void)
} }
} }
#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) #if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12)
ISR(TIMER3_COMPA_vect) ISR(TIMER3_COMPA_vect)
#else //STM32 interrupt #else //STM32 interrupt
static void gpt_backlight_timer_task(GPTDriver *gptp) static void gpt_backlight_timer_task(GPTDriver *gptp)
@ -2374,8 +2460,9 @@ void backlight_init_drivers(void)
IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
#else #else
IS31FL3731_init( ISSI_ADDR_1 ); IS31FL3731_init( ISSI_ADDR_1 );
#if !defined(RGB_BACKLIGHT_NEBULA12)
IS31FL3731_init( ISSI_ADDR_2 ); IS31FL3731_init( ISSI_ADDR_2 );
#endif
#if defined(RGB_BACKLIGHT_U80_A) #if defined(RGB_BACKLIGHT_U80_A)
IS31FL3731_init( ISSI_ADDR_3 ); IS31FL3731_init( ISSI_ADDR_3 );
#endif #endif
@ -2461,13 +2548,17 @@ void backlight_init_drivers(void)
bool enabled = !( ( index == 15+7 && !g_config.use_split_backspace ) || //other backspace bool enabled = !( ( index == 15+7 && !g_config.use_split_backspace ) || //other backspace
( index == 47+13 && g_config.use_7u_spacebar ) || //LD13 ( index == 47+13 && g_config.use_7u_spacebar ) || //LD13
( index == 47+15 && g_config.use_7u_spacebar ) ); //LD15 ( index == 47+15 && g_config.use_7u_spacebar ) ); //LD15
#elif defined(RGB_BACKLIGHT_NEBULA12)
bool enabled = !( ( index >= 9-1 && index <= 12-1 ) ); // A9-A12
#endif #endif
// This only caches it for later // This only caches it for later
IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
} }
// This actually updates the LED drivers // This actually updates the LED drivers
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 );
#if !defined(RGB_BACKLIGHT_NEBULA12)
IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 ); IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 );
#endif
#if defined(RGB_BACKLIGHT_U80_A) #if defined(RGB_BACKLIGHT_U80_A)
IS31FL3731_update_led_control_registers( ISSI_ADDR_3, 2 ); IS31FL3731_update_led_control_registers( ISSI_ADDR_3, 2 );
#endif #endif