refactor, non-working
This commit is contained in:
parent
76e0d23887
commit
6380f83190
9 changed files with 186 additions and 154 deletions
|
@ -19,7 +19,7 @@ void i2c_init(void)
|
|||
//TWBR = 10;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_start(uint8_t address, uint8_t timeout)
|
||||
i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
|
||||
{
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
|
@ -28,13 +28,13 @@ i2c_status_t i2c_start(uint8_t address, uint8_t timeout)
|
|||
|
||||
uint16_t timeout_timer = timer_read();
|
||||
while( !(TWCR & (1<<TWINT)) ) {
|
||||
if (timeout && (timer_read() - timeout_timer) > timeout) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return 1; }
|
||||
if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
|
||||
|
||||
// load slave address into data register
|
||||
TWDR = address;
|
||||
|
@ -43,19 +43,19 @@ i2c_status_t i2c_start(uint8_t address, uint8_t timeout)
|
|||
|
||||
timeout_timer = timer_read();
|
||||
while( !(TWCR & (1<<TWINT)) ) {
|
||||
if (timeout && (timer_read() - timeout_timer) > I2C_TIMEOUT) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
|
||||
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
|
||||
|
||||
return 0;
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_write(uint8_t data, uint8_t timeout)
|
||||
i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
|
||||
{
|
||||
// load data into data register
|
||||
TWDR = data;
|
||||
|
@ -64,17 +64,17 @@ i2c_status_t i2c_write(uint8_t data, uint8_t timeout)
|
|||
|
||||
uint16_t timeout_timer = timer_read();
|
||||
while( !(TWCR & (1<<TWINT)) ) {
|
||||
if (timeout && (timer_read() - timeout_timer) > I2C_TIMEOUT) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
|
||||
if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
|
||||
|
||||
return 0;
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_read_ack(uint8_t timeout)
|
||||
int16_t i2c_read_ack(uint16_t timeout)
|
||||
{
|
||||
|
||||
// start TWI module and acknowledge data after reception
|
||||
|
@ -82,7 +82,7 @@ i2c_status_t i2c_read_ack(uint8_t timeout)
|
|||
|
||||
uint16_t timeout_timer = timer_read();
|
||||
while( !(TWCR & (1<<TWINT)) ) {
|
||||
if (timeout && (timer_read() - timeout_timer) > I2C_TIMEOUT) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
@ -91,7 +91,7 @@ i2c_status_t i2c_read_ack(uint8_t timeout)
|
|||
return TWDR;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_read_nack(uint8_t timeout)
|
||||
int16_t i2c_read_nack(uint16_t timeout)
|
||||
{
|
||||
|
||||
// start receiving without acknowledging reception
|
||||
|
@ -99,7 +99,7 @@ i2c_status_t i2c_read_nack(uint8_t timeout)
|
|||
|
||||
uint16_t timeout_timer = timer_read();
|
||||
while( !(TWCR & (1<<TWINT)) ) {
|
||||
if (timeout && (timer_read() - timeout_timer) > I2C_TIMEOUT) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
@ -108,81 +108,112 @@ i2c_status_t i2c_read_nack(uint8_t timeout)
|
|||
return TWDR;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
|
||||
i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
|
||||
{
|
||||
if (i2c_start(address | I2C_WRITE)) return 1;
|
||||
i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
|
||||
if (status) return status;
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
for (uint16_t i = 0; i < length; i++) {
|
||||
status = i2c_write(data[i], timeout);
|
||||
if (status) return status;
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
status = i2c_stop(timeout);
|
||||
if (status) return status;
|
||||
|
||||
return 0;
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
|
||||
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
|
||||
{
|
||||
if (i2c_start(address | I2C_READ)) return 1;
|
||||
i2c_status_t status = i2c_start(address | I2C_READ, timeout);
|
||||
if (status) return status;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
{
|
||||
if (i2c_start(devaddr | 0x00)) return 1;
|
||||
|
||||
i2c_write(regaddr);
|
||||
|
||||
for (uint16_t i = 0; i < length; i++)
|
||||
{
|
||||
if (i2c_write(data[i])) return 1;
|
||||
for (uint16_t i = 0; i < (length-1); i++) {
|
||||
status = i2c_read_ack(timeout);
|
||||
if (status >= 0) {
|
||||
data[i] = status;
|
||||
} else {
|
||||
return status;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
status = i2c_read_nack(timeout);
|
||||
if (status >= 0 ) {
|
||||
data[(length-1)] = status;
|
||||
} else {
|
||||
return status;
|
||||
}
|
||||
|
||||
return 0;
|
||||
status = i2c_stop(timeout);
|
||||
if (status) return status;
|
||||
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
|
||||
i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
|
||||
{
|
||||
if (i2c_start(devaddr)) return 1;
|
||||
i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
|
||||
if (status) return status;
|
||||
|
||||
i2c_write(regaddr);
|
||||
status = i2c_write(regaddr, timeout);
|
||||
if (status) return status;
|
||||
|
||||
if (i2c_start(devaddr | 0x01)) return 1;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++)
|
||||
{
|
||||
data[i] = i2c_read_ack();
|
||||
for (uint16_t i = 0; i < length; i++) {
|
||||
status = i2c_write(data[i], timeout);
|
||||
if (status) return status;
|
||||
}
|
||||
data[(length-1)] = i2c_read_nack();
|
||||
|
||||
i2c_stop();
|
||||
status = i2c_stop(timeout);
|
||||
if (status) return status;
|
||||
|
||||
return 0;
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_stop(uint8_t timeout)
|
||||
i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
|
||||
{
|
||||
i2c_status_t status = i2c_start(devaddr, timeout);
|
||||
if (status) return status;
|
||||
|
||||
status = i2c_write(regaddr, timeout);
|
||||
if (status) return status;
|
||||
|
||||
status = i2c_start(devaddr | 0x01, timeout);
|
||||
if (status) return status;
|
||||
|
||||
for (uint16_t i = 0; i < (length-1); i++) {
|
||||
status = i2c_read_ack(timeout);
|
||||
if (status >= 0) {
|
||||
data[i] = status;
|
||||
} else {
|
||||
return status;
|
||||
}
|
||||
}
|
||||
|
||||
status = i2c_read_nack(timeout);
|
||||
if (status >= 0 ) {
|
||||
data[(length-1)] = status;
|
||||
} else {
|
||||
return status;
|
||||
}
|
||||
|
||||
status = i2c_stop(timeout);
|
||||
if (status) return status;
|
||||
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
i2c_status_t i2c_stop(uint16_t timeout)
|
||||
{
|
||||
// transmit STOP condition
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
|
||||
uint16_t timeout_timer = timer_read();
|
||||
while(TWCR & (1<<TWSTO)) {
|
||||
if (timeout && (timer_read() - timeout_timer) > I2C_TIMEOUT) {
|
||||
if (timeout && ((timer_read() - timeout_timer) > timeout)) {
|
||||
return I2C_STATUS_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
return I2C_STATUS_SUCCESS;
|
||||
}
|
||||
|
|
|
@ -8,20 +8,21 @@
|
|||
#define I2C_READ 0x01
|
||||
#define I2C_WRITE 0x00
|
||||
|
||||
typedef i2c_status_t int16_t
|
||||
#define I2C_STATUS_TIMEOUT (-1)
|
||||
typedef int16_t i2c_status_t;
|
||||
|
||||
#define I2C_NO_TIMEOUT 0
|
||||
#define I2C_STATUS_SUCCESS (0)
|
||||
#define I2C_STATUS_ERROR (-1)
|
||||
#define I2C_STATUS_TIMEOUT (-2)
|
||||
|
||||
void i2c_init(void);
|
||||
i2c_status_t i2c_start(uint8_t address, uint8_t timeout);
|
||||
i2c_status_t i2c_write(uint8_t data, uint8_t timeout);
|
||||
i2c_status_t i2c_read_ack(uint8_t timeout);
|
||||
i2c_status_t i2c_read_nack(uint8_t timeout);
|
||||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
|
||||
i2c_status_t i2c_stop(uint8_t timeout);
|
||||
i2c_status_t i2c_start(uint8_t address, uint16_t timeout);
|
||||
i2c_status_t i2c_write(uint8_t data, uint16_t timeout);
|
||||
int16_t i2c_read_ack(uint16_t timeout);
|
||||
int16_t i2c_read_nack(uint16_t timeout);
|
||||
i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
|
||||
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
|
||||
i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
|
||||
i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
|
||||
i2c_status_t i2c_stop(uint16_t timeout);
|
||||
|
||||
#endif // I2C_MASTER_H
|
||||
|
|
|
@ -49,6 +49,14 @@
|
|||
#define ISSI_COMMANDREGISTER 0xFD
|
||||
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||
|
||||
#ifndef ISSI_TIMEOUT
|
||||
#define ISSI_TIMEOUT 100
|
||||
#endif
|
||||
|
||||
#ifndef ISSI_PERSISTENCE
|
||||
#define ISSI_PERSISTENCE 0
|
||||
#endif
|
||||
|
||||
// Transfer buffer for TWITransmitData()
|
||||
uint8_t g_twi_transfer_buffer[20];
|
||||
|
||||
|
@ -78,100 +86,104 @@ bool g_led_control_registers_update_required = false;
|
|||
// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
|
||||
|
||||
|
||||
uint8_t IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||
void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||
{
|
||||
g_twi_transfer_buffer[0] = reg;
|
||||
g_twi_transfer_buffer[1] = data;
|
||||
|
||||
//Transmit data until succesful
|
||||
//while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
|
||||
return i2c_transmit(addr << 1, g_twi_transfer_buffer,2);
|
||||
#if ISSI_PERSISTENCE > 0
|
||||
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
||||
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
|
||||
break;
|
||||
}
|
||||
#else
|
||||
i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
|
||||
#endif
|
||||
}
|
||||
|
||||
uint8_t IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
// assumes bank is already selected
|
||||
|
||||
// transmit PWM registers in 9 transfers of 16 bytes
|
||||
// g_twi_transfer_buffer[] is 20 bytes
|
||||
|
||||
// iterate over the pwm_buffer contents at 16 byte intervals
|
||||
for ( int i = 0; i < 144; i += 16 )
|
||||
{
|
||||
for ( int i = 0; i < 144; i += 16 ) {
|
||||
// set the first register, e.g. 0x24, 0x34, 0x44, etc.
|
||||
g_twi_transfer_buffer[0] = 0x24 + i;
|
||||
// copy the data from i to i+15
|
||||
// device will auto-increment register for data after the first byte
|
||||
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
|
||||
for ( int j = 0; j < 16; j++ )
|
||||
{
|
||||
for ( int j = 0; j < 16; j++ ) {
|
||||
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
|
||||
}
|
||||
|
||||
//Transmit buffer until succesful
|
||||
//while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
|
||||
ret |= i2c_transmit(addr << 1, g_twi_transfer_buffer, 17);
|
||||
#if ISSI_PERSISTENCE > 0
|
||||
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
||||
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
|
||||
break;
|
||||
}
|
||||
#else
|
||||
i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
|
||||
#endif
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
uint8_t IS31FL3731_init( uint8_t addr )
|
||||
void IS31FL3731_init( uint8_t addr )
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
// In order to avoid the LEDs being driven with garbage data
|
||||
// in the LED driver's PWM registers, first enable software shutdown,
|
||||
// then set up the mode and other settings, clear the PWM registers,
|
||||
// then disable software shutdown.
|
||||
|
||||
// select "function register" bank
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
|
||||
IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
|
||||
|
||||
// enable software shutdown
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
|
||||
IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
|
||||
// this delay was copied from other drivers, might not be needed
|
||||
_delay_ms( 10 );
|
||||
|
||||
// picture mode
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
|
||||
IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
|
||||
// display frame 0
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
|
||||
IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
|
||||
// audio sync off
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
|
||||
IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
|
||||
|
||||
// select bank 0
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
|
||||
IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
|
||||
|
||||
// turn off all LEDs in the LED control register
|
||||
for ( int i = 0x00; i <= 0x11; i++ )
|
||||
{
|
||||
ret |= IS31FL3731_write_register( addr, i, 0x00 );
|
||||
IS31FL3731_write_register( addr, i, 0x00 );
|
||||
}
|
||||
|
||||
// turn off all LEDs in the blink control register (not really needed)
|
||||
for ( int i = 0x12; i <= 0x23; i++ )
|
||||
{
|
||||
ret |= IS31FL3731_write_register( addr, i, 0x00 );
|
||||
IS31FL3731_write_register( addr, i, 0x00 );
|
||||
}
|
||||
|
||||
// set PWM on all LEDs to 0
|
||||
for ( int i = 0x24; i <= 0xB3; i++ )
|
||||
{
|
||||
ret |= IS31FL3731_write_register( addr, i, 0x00 );
|
||||
IS31FL3731_write_register( addr, i, 0x00 );
|
||||
}
|
||||
|
||||
// select "function register" bank
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
|
||||
IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
|
||||
|
||||
// disable software shutdown
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
|
||||
IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
|
||||
|
||||
// select bank 0 and leave it selected.
|
||||
// most usage after initialization is just writing PWM buffers in bank 0
|
||||
// as there's not much point in double-buffering
|
||||
ret |= IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
|
||||
IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
|
||||
|
@ -224,32 +236,27 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
|
|||
|
||||
g_led_control_registers_update_required = true;
|
||||
|
||||
|
||||
}
|
||||
|
||||
uint8_t IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
|
||||
void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
if ( g_pwm_buffer_update_required )
|
||||
{
|
||||
ret |= IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
|
||||
ret |= IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
|
||||
IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
|
||||
IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
|
||||
}
|
||||
g_pwm_buffer_update_required = false;
|
||||
return ret;
|
||||
}
|
||||
|
||||
uint8_t IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
|
||||
void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
if ( g_led_control_registers_update_required )
|
||||
{
|
||||
for ( int i=0; i<18; i++ )
|
||||
{
|
||||
ret |= IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
|
||||
ret |= IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
|
||||
IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
|
||||
IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
|
@ -31,9 +31,9 @@ typedef struct is31_led {
|
|||
|
||||
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
|
||||
|
||||
uint8_t IS31FL3731_init( uint8_t addr );
|
||||
uint8_t IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
|
||||
uint8_t IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
|
||||
void IS31FL3731_init( uint8_t addr );
|
||||
void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
|
||||
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
|
||||
|
||||
void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
|
||||
void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
|
||||
|
@ -44,8 +44,8 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
|
|||
// (eg. from a timer interrupt).
|
||||
// Call this while idle (in between matrix scans).
|
||||
// If the buffer is dirty, it will update the driver with the buffer.
|
||||
uint8_t IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
|
||||
uint8_t IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
|
||||
void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
|
||||
void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
|
||||
|
||||
#define C1_1 0x24
|
||||
#define C1_2 0x25
|
||||
|
|
|
@ -138,6 +138,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_FUNCTION
|
||||
//#define DEBUG_MATRIX_SCAN_RATE
|
||||
|
||||
#define I2C_TIMEOUT 1000
|
||||
|
||||
#endif
|
||||
|
|
|
@ -24,7 +24,7 @@ extern inline void ergodox_led_all_set(uint8_t n);
|
|||
|
||||
|
||||
bool i2c_initialized = 0;
|
||||
uint8_t mcp23018_status = 0x20;
|
||||
i2c_status_t mcp23018_status = 0x20;
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
|
||||
|
@ -125,23 +125,23 @@ uint8_t init_mcp23018(void) {
|
|||
// - unused : input : 1
|
||||
// - input : input : 1
|
||||
// - driving : output : 0
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
|
||||
i2c_stop();
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(IODIRA, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00000000, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00111111, 0); if (mcp23018_status) goto out;
|
||||
i2c_stop(0);
|
||||
|
||||
// set pull-up
|
||||
// - unused : on : 1
|
||||
// - input : on : 1
|
||||
// - driving : off : 0
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPPUA, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00000000, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b00111111, 0); if (mcp23018_status) goto out;
|
||||
|
||||
out:
|
||||
i2c_stop();
|
||||
i2c_stop(0);
|
||||
|
||||
#ifdef LEFT_LEDS
|
||||
if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
|
||||
|
@ -165,22 +165,22 @@ uint8_t ergodox_left_leds_update(void) {
|
|||
// - unused : hi-Z : 1
|
||||
// - input : hi-Z : 1
|
||||
// - driving : hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE);
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, 0);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(OLATA);
|
||||
mcp23018_status = i2c_write(OLATA, 0);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b11111111
|
||||
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
|
||||
);
|
||||
& ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT),
|
||||
0);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0b11111111
|
||||
& ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
|
||||
& ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT)
|
||||
);
|
||||
& ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT),
|
||||
0);
|
||||
if (mcp23018_status) goto out;
|
||||
|
||||
out:
|
||||
i2c_stop();
|
||||
i2c_stop(0);
|
||||
return mcp23018_status;
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -23,7 +23,7 @@
|
|||
#define OLATA 0x14 // output latch register
|
||||
#define OLATB 0x15
|
||||
|
||||
extern uint8_t mcp23018_status;
|
||||
extern i2c_status_t mcp23018_status;
|
||||
|
||||
void init_ergodox(void);
|
||||
void ergodox_blink_all_leds(void);
|
||||
|
|
|
@ -295,13 +295,13 @@ static matrix_row_t read_cols(uint8_t row)
|
|||
return 0;
|
||||
} else {
|
||||
uint8_t data = 0;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out;
|
||||
data = i2c_read_nack();
|
||||
data = ~data;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOB, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_read_nack(0); if (mcp23018_status < 0) goto out;
|
||||
data = ~((uint8_t)mcp23018_status);
|
||||
out:
|
||||
i2c_stop();
|
||||
i2c_stop(0);
|
||||
return data;
|
||||
}
|
||||
} else {
|
||||
|
@ -350,11 +350,11 @@ static void select_row(uint8_t row)
|
|||
} else {
|
||||
// set active row low : 0
|
||||
// set other rows hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1<<row)); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA, 0); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1<<row), 0); if (mcp23018_status) goto out;
|
||||
out:
|
||||
i2c_stop();
|
||||
i2c_stop(0);
|
||||
}
|
||||
} else {
|
||||
// select on teensy
|
||||
|
|
|
@ -102,13 +102,8 @@ void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t
|
|||
}
|
||||
|
||||
void rgb_matrix_update_pwm_buffers(void) {
|
||||
uint8_t ret = IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
ret |= IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
if (ret == 2) {
|
||||
wait_ms(1000);
|
||||
i2c_stop();
|
||||
rgb_matrix_setup_drivers();
|
||||
}
|
||||
IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
}
|
||||
|
||||
void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) {
|
||||
|
|
Loading…
Reference in a new issue