diff --git a/keyboards/capsunlocked/cu75/config.h b/keyboards/capsunlocked/cu75/config.h index b8cd9eeebb..b9449c4714 100644 --- a/keyboards/capsunlocked/cu75/config.h +++ b/keyboards/capsunlocked/cu75/config.h @@ -17,8 +17,6 @@ along with this program. If not, see . #pragma once -#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c index c894d18602..f980b0d9e1 100644 --- a/keyboards/capsunlocked/cu75/cu75.c +++ b/keyboards/capsunlocked/cu75/cu75.c @@ -1,15 +1,8 @@ -#include -#include -#include #include "cu75.h" -#include "debug.h" -#include "../lfkeyboards/issi.h" -#include "../lfkeyboards/TWIlib.h" -#include "../lfkeyboards/lighting.h" +#include #ifdef AUDIO_ENABLE float test_sound[][2] = SONG(STARTUP_SOUND); -#include "audio.h" #endif uint16_t click_hz = CLICK_HZ; @@ -34,39 +27,12 @@ void matrix_init_kb(void) setPinOutput(C6); writePinLow(C6); #endif -#ifdef ISSI_ENABLE - issi_init(); -#endif } void matrix_scan_kb(void) { #ifdef WATCHDOG_ENABLE wdt_reset(); -#endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - dprintf("TWI failed to recover, TWI re-init\n"); - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } #endif matrix_scan_user(); } @@ -92,7 +58,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) } if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } @@ -105,11 +70,3 @@ void reset_keyboard_kb(void){ #endif reset_keyboard(); } - -// LFK lighting info -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; -const uint8_t rgb_sequence[] = { - 24, 23, 22, 21, 20, 19, 18, 17, 1, 2, 3, 4, 5, - 6, 7, 8, 10, 11, 12, 13, 14, 15, 16, 9 -}; diff --git a/keyboards/capsunlocked/cu75/cu75.h b/keyboards/capsunlocked/cu75/cu75.h index d17c1da26f..36797efd8f 100644 --- a/keyboards/capsunlocked/cu75/cu75.h +++ b/keyboards/capsunlocked/cu75/cu75.h @@ -1,23 +1,6 @@ #pragma once #include "quantum.h" -#include "matrix.h" -#include - -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; #define CLICK_HZ 500 #define CLICK_MS 2 diff --git a/keyboards/capsunlocked/cu75/info.json b/keyboards/capsunlocked/cu75/info.json index 24aed787ef..25e3ca049f 100644 --- a/keyboards/capsunlocked/cu75/info.json +++ b/keyboards/capsunlocked/cu75/info.json @@ -13,30 +13,6 @@ "rows": ["F1", "B7", "B3", "D2", "D3", "B2"] }, "diode_direction": "COL2ROW", - "backlight": { - "driver": "custom", - "levels": 8 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 24, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/capsunlocked/cu75/keymaps/default/rules.mk b/keyboards/capsunlocked/cu75/keymaps/default/rules.mk index 483baa7993..b4a28dd964 100644 --- a/keyboards/capsunlocked/cu75/keymaps/default/rules.mk +++ b/keyboards/capsunlocked/cu75/keymaps/default/rules.mk @@ -4,10 +4,5 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Disable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Disable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk b/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk index 0058113605..c692135bf3 100644 --- a/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk +++ b/keyboards/capsunlocked/cu75/keymaps/iso/rules.mk @@ -4,10 +4,5 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes -# BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Disable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/capsunlocked/cu75/post_rules.mk b/keyboards/capsunlocked/cu75/post_rules.mk index a5d9746664..1a3c10d3a1 100644 --- a/keyboards/capsunlocked/cu75/post_rules.mk +++ b/keyboards/capsunlocked/cu75/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/capsunlocked/cu75/rules.mk b/keyboards/capsunlocked/cu75/rules.mk index cf757fc166..e69de29bb2 100644 --- a/keyboards/capsunlocked/cu75/rules.mk +++ b/keyboards/capsunlocked/cu75/rules.mk @@ -1,3 +0,0 @@ -# TODO: These boards need to be converted to RGB Matrix -VPATH += keyboards/lfkeyboards -SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/TWIlib.c b/keyboards/lfkeyboards/TWIlib.c deleted file mode 100644 index 0d52322c64..0000000000 --- a/keyboards/lfkeyboards/TWIlib.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * TWIlib.c - * - * Created: 6/01/2014 10:41:33 PM - * Author: Chris Herring - */ - -#include -#include -#include "TWIlib.h" -#include -#include "print.h" - -// Global transmit buffer -volatile uint8_t *TWITransmitBuffer; -// Global receive buffer -volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; -// Buffer indexes -volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. -int RXBuffIndex; // Current index in the receive buffer -// Buffer lengths -int TXBuffLen; // The total length of the transmit buffer -int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) - -TWIInfoStruct TWIInfo; - -void TWIInit(void) -{ - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWIInfo.repStart = 0; - // Set pre-scalers (no pre-scaling) - TWSR = 0; - // Set bit rate - TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; - // Enable TWI and interrupt - TWCR = (1 << TWIE) | (1 << TWEN); -} - -uint8_t isTWIReady(void) -{ - if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) ) - { - return 1; - } - else - { - if(TWIInfo.mode == Initializing){ - switch(TWIInfo.errorCode){ - case TWI_SUCCESS: - case TWI_NO_RELEVANT_INFO: - break; - case TWI_LOST_ARBIT: - case TWI_MT_DATA_NACK: - // Some kind of I2C error, reset and re-init - xprintf("I2C init error: %d\n", TWIInfo.errorCode); - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - break; - default: - xprintf("Other i2c init error: %d\n", TWIInfo.errorCode); - } - } - return 0; - } -} - - -void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking) -{ - // Wait until ready - while (!isTWIReady()) {_delay_us(1);} - // Reset the I2C stuff - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - // Set repeated start mode - TWIInfo.repStart = repStart; - // Copy transmit info to global variables - TWITransmitBuffer = (uint8_t *)TXdata; - TXBuffLen = dataLen; - TXBuffIndex = 0; - - // If a repeated start has been sent, then devices are already listening for an address - // and another start does not need to be sent. - if (TWIInfo.mode == RepeatedStartSent) - { - TWIInfo.mode = Initializing; - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWISendTransmit(); // Send the data - } - else // Otherwise, just send the normal start signal to begin transmission. - { - TWIInfo.mode = Initializing; - TWISendStart(); - } - if(blocking){ - // Wait until ready - while (!isTWIReady()){_delay_us(1);} - } -} - - -// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart) -// { -// if (dataLen <= TXMAXBUFLEN) -// { -// // Wait until ready -// while (!isTWIReady()) {_delay_us(1);} -// // Set repeated start mode -// TWIInfo.repStart = repStart; -// // Copy data into the transmit buffer -// uint8_t *data = (uint8_t *)TXdata; -// for (int i = 0; i < dataLen; i++) -// { -// TWITransmitBuffer[i] = data[i]; -// } -// // Copy transmit info to global variables -// TXBuffLen = dataLen; -// TXBuffIndex = 0; - -// // If a repeated start has been sent, then devices are already listening for an address -// // and another start does not need to be sent. -// if (TWIInfo.mode == RepeatedStartSent) -// { -// TWIInfo.mode = Initializing; -// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer -// TWISendTransmit(); // Send the data -// } -// else // Otherwise, just send the normal start signal to begin transmission. -// { -// TWIInfo.mode = Initializing; -// TWISendStart(); -// } - -// } -// else -// { -// return 1; // return an error if data length is longer than buffer -// } -// return 0; -// } - -uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart) -{ - // Check if number of bytes to read can fit in the RXbuffer - if (bytesToRead < RXMAXBUFLEN) - { - // Reset buffer index and set RXBuffLen to the number of bytes to read - RXBuffIndex = 0; - RXBuffLen = bytesToRead; - // Create the one value array for the address to be transmitted - uint8_t TXdata[1]; - // Shift the address and AND a 1 into the read write bit (set to write mode) - TXdata[0] = (TWIaddr << 1) | 0x01; - // Use the TWITransmitData function to initialize the transfer and address the slave - TWITransmitData(TXdata, 1, repStart, 0); - } - else - { - return 0; - } - return 1; -} - -ISR (TWI_vect) -{ - switch (TWI_STATUS) - { - // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- // - case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received - // Set mode to Master Transmitter - TWIInfo.mode = MasterTransmitter; - case TWI_START_SENT: // Start condition has been transmitted - case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received - if (TXBuffIndex < TXBuffLen) // If there is more data to send - { - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendTransmit(); // Send the data - } - // This transmission is complete however do not release bus yet - else if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MASTER RECEIVER ----\/ ---- // - - case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received - // Switch to Master Receiver mode - TWIInfo.mode = MasterReceiver; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // This transmission is complete however do not release bus yet - if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MT and MR common ----\/ ---- // - - case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received - case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received - case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received - case TWI_LOST_ARBIT: // Arbitration has been lost - // Return error and send stop and set mode to ready - if (TWIInfo.repStart) - { - TWIInfo.errorCode = TWI_STATUS; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = TWI_STATUS; - TWISendStop(); - } - break; - case TWI_REP_START_SENT: // Repeated start has been transmitted - // Set the mode but DO NOT clear TWINT as the next data is not yet ready - TWIInfo.mode = RepeatedStartSent; - break; - - // ----\/ ---- SLAVE RECEIVER ----\/ ---- // - - // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY - - // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- // - - // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY - - // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- // - case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition - // Rather, it is there to be manually set between operations - break; - case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error - TWIInfo.errorCode = TWI_ILLEGAL_START_STOP; - TWIInfo.mode = Ready; - TWISendStop(); - break; - } - -} diff --git a/keyboards/lfkeyboards/TWIlib.h b/keyboards/lfkeyboards/TWIlib.h deleted file mode 100644 index 8ba261c6e5..0000000000 --- a/keyboards/lfkeyboards/TWIlib.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * TWIlib.h - * - * Created: 6/01/2014 10:38:42 PM - * Author: Chris Herring - */ - - -#ifndef TWILIB_H_ -#define TWILIB_H_ -// TWI bit rate -#define TWI_FREQ 400000 -// Get TWI status -#define TWI_STATUS (TWSR & 0xF8) -// Transmit buffer length -#define TXMAXBUFLEN 20 -// Receive buffer length -#define RXMAXBUFLEN 20 - -typedef enum { - Ready, - Initializing, - RepeatedStartSent, - MasterTransmitter, - MasterReceiver, - SlaceTransmitter, - SlaveReciever - } TWIMode; - - typedef struct TWIInfoStruct{ - TWIMode mode; - uint8_t errorCode; - uint8_t repStart; - }TWIInfoStruct; - -extern TWIInfoStruct TWIInfo; - -// TWI Status Codes -#define TWI_START_SENT 0x08 // Start sent -#define TWI_REP_START_SENT 0x10 // Repeated Start sent -// Master Transmitter Mode -#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received -#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received -#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received -#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received -// Master Receiver Mode -#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received -#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received -#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned -#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned - -// Miscellaneous States -#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost -#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available -#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected -#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only - - -#define TWISendStart() (TWCR = (1< -#include -#include -#include -#include -#include -#include "issi.h" -#include "print.h" -#include "TWIlib.h" - -#define ISSI_ADDR_DEFAULT 0xE8 - -#define ISSI_REG_CONFIG 0x00 -#define ISSI_REG_CONFIG_PICTUREMODE 0x00 -#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08 - -#define ISSI_CONF_PICTUREMODE 0x00 -#define ISSI_CONF_AUTOFRAMEMODE 0x04 -#define ISSI_CONF_AUDIOMODE 0x08 - -#define ISSI_REG_PICTUREFRAME 0x01 - -#define ISSI_REG_SHUTDOWN 0x0A -#define ISSI_REG_AUDIOSYNC 0x06 - -#define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' -uint8_t control[8][9] = { - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; -ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0}; - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif - -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -#define I2C_WRITE 0 -#define F_SCL 400000UL // SCL frequency -#define Prescaler 1 -#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2) - -uint8_t i2c_start(uint8_t address) -{ - // reset TWI control register - TWCR = 0; - // transmit START condition - TWCR = (1<> 1; - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device == 0){ - return; - } - // xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm); - uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0... - uint8_t y = cy - 1; // creating them once for less confusion - uint8_t control_reg = (y << 1) | (matrix & 0x01); - if(pwm == 0){ - cbi(device->led_ctrl[control_reg], x); - cbi(device->led_blink_ctrl[control_reg], x); - }else{ - sbi(device->led_ctrl[control_reg], x); - sbi(device->led_blink_ctrl[control_reg], x); - } - uint8_t pwm_reg = 0; - switch(matrix & 0x01){ - case 0: - pwm_reg = 0x00; - break; - case 1: - pwm_reg = 0x08; - break; - } - pwm_reg += (y << 4) + x; - device->led_pwm[pwm_reg] = pwm; - device->led_dirty = 1; -} - -void update_issi(uint8_t device_addr, uint8_t blocking) -{ - // This seems to take about 6ms - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device != 0){ - if(device->fn_dirty){ - device->fn_dirty = 0; - setFrame(device_addr, ISSI_BANK_FUNCTIONREG); - TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1); - } - if(device->led_dirty){ - device->led_dirty = 0; - setFrame(device_addr, 0); - TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking); - } - } -} - -void issi_init(void) -{ - TWIInit(); - for(uint8_t device_addr = 0; device_addr < 4; device_addr++){ - // If this device has been previously allocated, free it - if(issi_devices[device_addr] != 0){ - free(issi_devices[device_addr]); - } - // Try to shutdown the device, if this fails skip this device - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - while (!isTWIReady()){_delay_us(1);} - if(TWIInfo.errorCode != 0xFF){ - xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode); - continue; - } - // Allocate the device structure - calloc zeros it for us - ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1); - issi_devices[device_addr] = device; - device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->fn_register_addr = 0; - device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->led_register_addr = 0; - // set dirty bits so that all of the buffered data is written out - device->fn_dirty = 1; - device->led_dirty = 1; - update_issi(device_addr, 1); - // Set the function register to picture mode - // device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE; - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - } - - // Shutdown and set all registers to 0 - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - // for(uint8_t bank = 0; bank <= 7; bank++){ - // for (uint8_t reg = 0x00; reg <= 0xB3; reg++) { - // writeRegister8(device_addr, bank, reg, 0x00); - // } - // } - // for (uint8_t reg = 0; reg <= 0x0C; reg++) { - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00); - // } - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE); - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - // picture mode - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01); - - //Enable blink - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B); - - //Enable Breath - -} - -#endif \ No newline at end of file diff --git a/keyboards/lfkeyboards/issi.h b/keyboards/lfkeyboards/issi.h deleted file mode 100644 index 74379ddbc8..0000000000 --- a/keyboards/lfkeyboards/issi.h +++ /dev/null @@ -1,39 +0,0 @@ -#pragma once - -#ifdef ISSI_ENABLE - -typedef struct ISSIDeviceStruct{ - uint8_t fn_dirty; // function registers need to be resent - uint8_t fn_device_addr; - uint8_t fn_register_addr; - uint8_t fn_registers[13]; - uint8_t led_dirty; // LED data has changed and needs to be resent - uint8_t led_device_addr; - uint8_t led_register_addr; - uint8_t led_ctrl[18]; - uint8_t led_blink_ctrl[18]; - uint8_t led_pwm[144]; -}ISSIDeviceStruct; - -extern ISSIDeviceStruct *issi_devices[]; - -// Low level commands- 'device' is the 2-bit i2c id. -void issi_init(void); -void set_shutdown(uint8_t device, uint8_t shutdown); -void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data); - -// Higher level, no device is given, but it is calculated from 'matrix' -// Each device has 2 blocks, max of 4 devices: -// Device | Block = Matrix -// 0 A 0 -// 0 B 1 -// 1 A 2 -// 1 B 3 -// 2 A 4 -// 2 B 5 -// 3 A 6 -// 3 B 7 -void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm); -void update_issi(uint8_t device_addr, uint8_t blocking); - -#endif diff --git a/keyboards/lfkeyboards/lfk65_hs/config.h b/keyboards/lfkeyboards/lfk65_hs/config.h index 221eee1bd4..7bc78f68d6 100644 --- a/keyboards/lfkeyboards/lfk65_hs/config.h +++ b/keyboards/lfkeyboards/lfk65_hs/config.h @@ -1,7 +1,5 @@ #pragma once -#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/lfk65_hs/info.json b/keyboards/lfkeyboards/lfk65_hs/info.json index ca2e2c695b..0034fced4a 100644 --- a/keyboards/lfkeyboards/lfk65_hs/info.json +++ b/keyboards/lfkeyboards/lfk65_hs/info.json @@ -13,28 +13,6 @@ "rows": ["B0", "B3", "B2", "B1", "F5"] }, "diode_direction": "COL2ROW", - "backlight": { - "levels": 8 - }, - "rgblight": { - "hue_steps": 10, - "led_count": 20, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c index 47ad655ddc..ee8d8b2e73 100644 --- a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c +++ b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c @@ -1,13 +1,10 @@ -#include -#include -#include #include "lfk65_hs.h" +#include bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } diff --git a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h index 2be617b404..90031022d3 100644 --- a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h +++ b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h @@ -1,8 +1,5 @@ #pragma once #include "quantum.h" -#include "matrix.h" -#include -#include void reset_keyboard_kb(void); diff --git a/keyboards/lfkeyboards/lfk65_hs/rules.mk b/keyboards/lfkeyboards/lfk65_hs/rules.mk index 5589209fdd..e69de29bb2 100644 --- a/keyboards/lfkeyboards/lfk65_hs/rules.mk +++ b/keyboards/lfkeyboards/lfk65_hs/rules.mk @@ -1,2 +0,0 @@ -# Extra source files for IS3731 lighting -SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 89d9c4b243..99c3904213 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -17,8 +17,6 @@ along with this program. If not, see . #pragma once -#define BACKLIGHT_PWM_MAP { 8, 16, 40, 55, 70, 128, 200, 255 } - #define AUDIO_PIN C6 #define AUDIO_VOICES diff --git a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c index f4d1e010ee..80e267e458 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c @@ -15,23 +15,6 @@ enum { bool spam_space = false; -// {0x00000000, 0xFFFFFFFF, {0x0000, 0x0FFF, 0x0000}}, // base layer - green -// {0x00000008, 0xFFFFFFF8, {0x07FF, 0x07FF, 0x0000}}, // CSGO layer - orange -// {0x00000010, 0xFFFFFFF0, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue -// {0x00000020, 0xFFFFFFE0, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta -// {0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white - -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x0000, 0x0FFF, 0x0000}}, // base layer - green - {0x00000002, 0xFFFFFFFE, {0x07FF, 0x07FF, 0x0000}}, // CSGO layer - orange - {0x00000004, 0xFFFFFFFC, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue - {0x00000008, 0xFFFFFFE8, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap BASE: (Base Layer) Default Layer * ,---------. ,------------------------------------------------------------. ,---------. @@ -55,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [CS_GO] = LAYOUT_split_rshift( - _______, _______, QK_GESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, F(0), _______, + _______, _______, QK_GESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LCTL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/rules.mk b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/rules.mk index 481ff1407b..732bfcfa8f 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/rules.mk +++ b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/rules.mk @@ -1,34 +1,3 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable RGB underlight -SLEEP_LED_ENABLE = yes +AUDIO_ENABLE = no TAP_DANCE_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms - - -# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired -# # -# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight -# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB -# # -# # Set to B, C or D -# LFK_REV = D - -# ifeq ($(LFK_REV), B) -# MCU = atmega32u4 -# else -# MCU = at90usb1286 -# endif -# OPT_DEFS += -DLFK_REV_$(LFK_REV) -# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\" diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c index 4b0a7e2196..d81ed91814 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - { 0x00000000, 0xFFFFFFFF, { 0x0000, 0x0FFF, 0x0000 } }, // base layer - green - { 0x00000002, 0xFFFFFFFE, { 0x0000, 0x0000, 0x0FFF } }, // function layer - blue - { 0x00000004, 0xFFFFFFFC, { 0x0FFF, 0x0000, 0x0FFF } }, // settings layer - magenta - { 0xFFFFFFFF, 0xFFFFFFFF, { 0x0FFF, 0x0FFF, 0x0FFF } } // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,---------. ,------------------------------------------------------------. ,---------. diff --git a/keyboards/lfkeyboards/lfk78/keymaps/iso/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/iso/keymap.c index 7db914604d..1f3ef6fc8e 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/iso/keymap.c +++ b/keyboards/lfkeyboards/lfk78/keymaps/iso/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - { 0x00000000, 0xFFFFFFFF, { 0x0000, 0x0FFF, 0x0000 } }, // base layer - green - { 0x00000002, 0xFFFFFFFE, { 0x0000, 0x0000, 0x0FFF } }, // function layer - blue - { 0x00000004, 0xFFFFFFFC, { 0x0FFF, 0x0000, 0x0FFF } }, // settings layer - magenta - { 0xFFFFFFFF, 0xFFFFFFFF, { 0x0FFF, 0x0FFF, 0x0FFF } } // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,---------. ,------------------------------------------------------------. ,---------. diff --git a/keyboards/lfkeyboards/lfk78/keymaps/split_bs_osx/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/split_bs_osx/keymap.c index 00e292d61f..041c3cdfd0 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/split_bs_osx/keymap.c +++ b/keyboards/lfkeyboards/lfk78/keymaps/split_bs_osx/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - { 0x00000000, 0xFFFFFFFF, { 0x0000, 0x0FFF, 0x0000 } }, // base layer - green - { 0x00000002, 0xFFFFFFFE, { 0x0000, 0x0000, 0x0FFF } }, // function layer - blue - { 0x00000004, 0xFFFFFFFC, { 0x0FFF, 0x0000, 0x0FFF } }, // settings layer - magenta - { 0xFFFFFFFF, 0xFFFFFFFF, { 0x0FFF, 0x0FFF, 0x0FFF } } // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,---------. ,------------------------------------------------------------. ,---------. diff --git a/keyboards/lfkeyboards/lfk78/lfk78.c b/keyboards/lfkeyboards/lfk78/lfk78.c index 3a10f51cb6..50f1505050 100644 --- a/keyboards/lfkeyboards/lfk78/lfk78.c +++ b/keyboards/lfkeyboards/lfk78/lfk78.c @@ -1,55 +1,19 @@ #include "lfk78.h" - -#include #include -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" - -#ifdef AUDIO_ENABLE -# include "audio.h" -#endif uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; uint8_t click_toggle = CLICK_ENABLED; -__attribute__((weak)) -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - { 0x00000000, 0xFFFFFFFF, { 0x0000, 0x0FFF, 0x0000 } }, // base layer - green - { 0x00000002, 0xFFFFFFFE, { 0x0000, 0x0000, 0x0FFF } }, // function layer - blue - { 0x00000004, 0xFFFFFFFC, { 0x0FFF, 0x0000, 0x0FFF } }, // settings layer - magenta - { 0xFFFFFFFF, 0xFFFFFFFF, { 0x0FFF, 0x0FFF, 0x0FFF } } // unknown layer - REQUIRED - white -}; - void matrix_init_kb(void) { matrix_init_user(); - // Configure the Layer LED - // Set up 16 bit PWM: Fast PWM, mode 14, inverted - TCCR1A = _BV(COM1A1) | _BV(COM1A0) | _BV(COM1B1) | _BV(COM1B0) | _BV(COM1C1) | _BV(COM1C0) | _BV(WGM11); - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); - ICR1 = 0xFFFF; - // PWM values - 0xFFFF = off, 0x0000 = max - OCR1A = 0x0FFF; // B5 - Red - OCR1B = 0x0000; // B6 - Green - OCR1C = 0x0000; // B7 - Blue - // Set as output - setPinOutput(B5); - setPinOutput(B6); - setPinOutput(B7); - #ifndef AUDIO_ENABLE // If we're not using the audio pin, drive it low setPinOutput(C6); writePinLow(C6); #endif -#ifdef ISSI_ENABLE - issi_init(); -#endif - #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -62,54 +26,6 @@ void matrix_scan_kb(void) { wdt_reset(); #endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - - if (twi_last_ready > 1000) { - // It's been way too long since the last ISSI update, reset the I2C bus and start again - dprintf("TWI failed to recover, TWI re-init\n"); - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - - if (isTWIReady()) { - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - - if (issi_device) { - issi_device = 0; - } else { - issi_device = 3; - } - } else { - twi_last_ready++; - } -#endif - - // Update layer indicator LED - // - // Not sure how else to reliably do this... TMK has the 'hook_layer_change' - // but can't find QMK equiv - static uint32_t layer_indicator = -1; - - if (layer_indicator != layer_state) { - for (uint32_t i = 0; ; i++) { - // the layer_info list should end with layer 0xFFFFFFFF - // it will break this out of the loop and define the unknown layer color - if ((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)) { - OCR1A = layer_info[i].color.red; - OCR1B = layer_info[i].color.green; - OCR1C = layer_info[i].color.blue; - layer_indicator = layer_state; - break; - } - } - } - matrix_scan_user(); } @@ -144,34 +60,5 @@ void reset_keyboard_kb(void) { wdt_reset(); #endif - OCR1A = 0x0000; // B5 - Red - OCR1B = 0x0FFF; // B6 - Green - OCR1C = 0x0FFF; // B7 - Blue - reset_keyboard(); } - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { -#ifdef ISSI_ENABLE -# ifdef CAPSLOCK_LED - if (led_state.caps_lock) { - activateLED(0, 3, 7, 255); - } else { - activateLED(0, 3, 7, 0); - } -# endif // CAPSLOCK_LED -#endif // ISS_ENABLE - - } - return res; -} - -// LFK lighting info -const uint8_t switch_matrices[] = { 0, 1 }; -const uint8_t rgb_matrices[] = { 6, 7 }; -const uint8_t rgb_sequence[] = { - 12, 11, 10, 9, 16, 32, 31, 30, 28, 25, 24, 22, 21, - 20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 14, 13 -}; diff --git a/keyboards/lfkeyboards/lfk78/lfk78.h b/keyboards/lfkeyboards/lfk78/lfk78.h index 1be53181cd..ee6f8d47e0 100644 --- a/keyboards/lfkeyboards/lfk78/lfk78.h +++ b/keyboards/lfkeyboards/lfk78/lfk78.h @@ -2,21 +2,6 @@ #include "quantum.h" -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; - #define CLICK_HZ 500 #define CLICK_MS 2 #define CLICK_ENABLED 0 diff --git a/keyboards/lfkeyboards/lfk78/post_rules.mk b/keyboards/lfkeyboards/lfk78/post_rules.mk index 817a085f5e..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/lfk78/post_rules.mk +++ b/keyboards/lfkeyboards/lfk78/post_rules.mk @@ -1,14 +1,3 @@ -# Extra source files for IS3731 lighting -SRC += TWIlib.c issi.c lighting.c - -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif - -ifeq ($(strip $(CAPSLOCK_LED)), yes) - OPT_DEFS += -DCAPSLOCK_LED -endif diff --git a/keyboards/lfkeyboards/lfk78/revb/info.json b/keyboards/lfkeyboards/lfk78/revb/info.json index 1431ce1cc6..ac98455afa 100644 --- a/keyboards/lfkeyboards/lfk78/revb/info.json +++ b/keyboards/lfkeyboards/lfk78/revb/info.json @@ -13,30 +13,6 @@ "rows": ["B0", "B1", "B2", "B3", "B4", "F0", "F1", "F4", "F5", "F6"] }, "diode_direction": "COL2ROW", - "backlight": { - "driver": "custom", - "levels": 8 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 31, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/lfkeyboards/lfk78/revb/revb.c b/keyboards/lfkeyboards/lfk78/revb/revb.c deleted file mode 100644 index d5b6b47b03..0000000000 --- a/keyboards/lfkeyboards/lfk78/revb/revb.c +++ /dev/null @@ -1,19 +0,0 @@ -#include "quantum.h" - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// / \ ISSI Col | ISSI Row | -// matrix idx -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12}, - {0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22}, - {0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32}, - {0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41}, - {0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5}, - {0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93}, - {0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3}, - {0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, 0x00}, - {0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, 0x00}, - {0xE4, 0xE3, 0xE2, 0xE1, 0x92, 0x91, 0xA2, 0xA1} -}; diff --git a/keyboards/lfkeyboards/lfk78/revc/info.json b/keyboards/lfkeyboards/lfk78/revc/info.json index 980ffafc63..7bfaf8cac6 100644 --- a/keyboards/lfkeyboards/lfk78/revc/info.json +++ b/keyboards/lfkeyboards/lfk78/revc/info.json @@ -13,30 +13,6 @@ "rows": ["D2", "D3", "D4", "D5", "D6"] }, "diode_direction": "COL2ROW", - "backlight": { - "driver": "custom", - "levels": 8 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 27, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "at90usb1286", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/lfkeyboards/lfk78/revc/revc.c b/keyboards/lfkeyboards/lfk78/revc/revc.c deleted file mode 100644 index a31aea365b..0000000000 --- a/keyboards/lfkeyboards/lfk78/revc/revc.c +++ /dev/null @@ -1,14 +0,0 @@ -#include "quantum.h" - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// / \ ISSI Col | ISSI Row | -// matrix idx -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91}, - {0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1}, - {0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, 0x00, 0x00, 0x00}, - {0x49, 0x48, 0x47, 0x00, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0x00, 0xC2, 0x00}, - {0x59, 0x58, 0x57, 0x56, 0x55, 0x00, 0x00, 0x00, 0x51, 0x00, 0x00, 0x00, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1} -}; diff --git a/keyboards/lfkeyboards/lfk78/revj/info.json b/keyboards/lfkeyboards/lfk78/revj/info.json index 5ff7bcbbfd..f99df02ed9 100644 --- a/keyboards/lfkeyboards/lfk78/revj/info.json +++ b/keyboards/lfkeyboards/lfk78/revj/info.json @@ -13,30 +13,6 @@ "rows": ["D2", "D3", "D4", "D5", "D6"] }, "diode_direction": "COL2ROW", - "backlight": { - "driver": "custom", - "levels": 8 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 27, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "at90usb646", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/lfkeyboards/lfk78/revj/revj.c b/keyboards/lfkeyboards/lfk78/revj/revj.c deleted file mode 100644 index a31aea365b..0000000000 --- a/keyboards/lfkeyboards/lfk78/revj/revj.c +++ /dev/null @@ -1,14 +0,0 @@ -#include "quantum.h" - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// / \ ISSI Col | ISSI Row | -// matrix idx -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91}, - {0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1}, - {0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, 0x00, 0x00, 0x00}, - {0x49, 0x48, 0x47, 0x00, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0x00, 0xC2, 0x00}, - {0x59, 0x58, 0x57, 0x56, 0x55, 0x00, 0x00, 0x00, 0x51, 0x00, 0x00, 0x00, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1} -}; diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index 4e3f7b9256..82ffed96f5 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -7,13 +7,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms -CAPSLOCK_LED = no # Toggle back light LED of Caps Lock DEFAULT_FOLDER = lfkeyboards/lfk78/revj diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index 20aba2ad6b..84c2fd11dc 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -20,8 +20,6 @@ along with this program. If not, see . #define AUDIO_VOICES #define AUDIO_PIN C6 -#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/lfk87/info.json b/keyboards/lfkeyboards/lfk87/info.json index 6a2d5eb796..0b53928421 100644 --- a/keyboards/lfkeyboards/lfk87/info.json +++ b/keyboards/lfkeyboards/lfk87/info.json @@ -8,15 +8,5 @@ "pid": "0x6060", "device_version": "0.0.1" }, - "backlight": { - "driver": "custom", - "levels": 10 - }, - "rgblight": { - "driver": "custom" - }, - "ws2812": { - "pin": "F4" - }, "community_layouts": ["tkl_ansi", "tkl_iso"] } diff --git a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c index 0dfba1afac..3be46837c1 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c @@ -13,17 +13,6 @@ enum { TD_ESC_FUNC = 0, }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFF8, {0x00, 0xFF, 0x00}}, // base layers (VANILLA, DEFAULT_WKL, DEFAULT_OSX) - green - {0x00000008, 0xFFFFFFF8, {0x07FF, 0x07FF, 0x0000}}, // CSGO layer - orange - {0x00000010, 0xFFFFFFF0, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue - {0x00000020, 0xFFFFFFE0, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/rules.mk index 8d2c18f6dd..eb12c33f4a 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/rules.mk @@ -1,17 +1,2 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB underlight -SLEEP_LED_ENABLE = yes TAP_DANCE_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c index 2b1860fab3..b9057e9047 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS, // 0x10 }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk index ec4ce1afba..bcd6b23d23 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk @@ -1,13 +1 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output -RGBLIGHT_ENABLE = yes # Enable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c index 48726503ab..0191b3570f 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS, // 0x10 }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0x00, 0x00}}, // base layers - off - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/rules.mk index 01b8506d3a..bcd6b23d23 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/rules.mk @@ -1,16 +1 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c index 56ca013b0d..510aa6730f 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS, // 0x04 }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0x00, 0x00}}, // base layer - off - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0x7F}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0x7F, 0x00, 0x00}}, // settings layer - red - {0xFFFFFFFF, 0xFFFFFFFF, {0x0F, 0x0F, 0x0F}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk index 7baa40317a..a5f96a8317 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk @@ -1,13 +1,2 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output -RGBLIGHT_ENABLE = yes # Enable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +AUDIO_ENABLE = yes WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfk87/lfk87.c b/keyboards/lfkeyboards/lfk87/lfk87.c index 3e95361a33..849f0ebcc5 100644 --- a/keyboards/lfkeyboards/lfk87/lfk87.c +++ b/keyboards/lfkeyboards/lfk87/lfk87.c @@ -1,42 +1,20 @@ - -#include -#include -#include #include "lfk87.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" -#include "quantum.h" +#include uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; uint8_t click_toggle = CLICK_ENABLED; -__attribute__((weak)) -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up matrix_init_user(); - set_rgb(31, 0x00, 0x00, 0x00); // Caps lock - set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red #ifndef AUDIO_ENABLE // If we're not using the audio pin, drive it low setPinOutput(C6); writePinLow(C6); #endif -#ifdef ISSI_ENABLE - issi_init(); -#endif #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -49,49 +27,10 @@ void matrix_scan_kb(void) #ifdef WATCHDOG_ENABLE wdt_reset(); #endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } -#endif - // Update layer indicator LED - // - // Not sure how else to reliably do this... TMK has the 'hook_layer_change' - // but can't find QMK equiv - static uint32_t layer_indicator = -1; - if(layer_indicator != layer_state){ - for(uint32_t i=0;; i++){ - // the layer_info list should end with layer 0xFFFF - // it will break this out of the loop and define the unknown layer color - if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ - set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue); - layer_indicator = layer_state; - break; - } - } - } matrix_scan_user(); } -void click(uint16_t freq, uint16_t duration){ +void clicking_notes(uint16_t freq, uint16_t duration){ #ifdef AUDIO_ENABLE if(freq >= 100 && freq <= 20000 && duration < 100){ play_note(freq, 10); @@ -106,11 +45,10 @@ void click(uint16_t freq, uint16_t duration){ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (click_toggle && record->event.pressed){ - click(click_hz, click_time); + clicking_notes(click_hz, click_time); } if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } @@ -121,35 +59,5 @@ void reset_keyboard_kb(void){ wdt_disable(); wdt_reset(); #endif - set_rgb(31, 0x00, 0xFF, 0xFF); - set_rgb(32, 0x00, 0xFF, 0xFF); - force_issi_refresh(); reset_keyboard(); } - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - // Set capslock LED to Blue - if (led_state.caps_lock) { - set_rgb(31, 0x00, 0x00, 0x7F); - } else{ - set_rgb(31, 0x00, 0x00, 0x00); - } - } - return res; -} - -// Lighting info, see lighting.h for details -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; - -// RGB Map: -// 27 29 10 9 8 7 6 -// 26 5 -// 25 4 -// 24 3 -// 23 22 21 20 14 15 11 1 2 -const uint8_t rgb_sequence[] = { - 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 11, 15, 14, 20, 21, 22, 23, 24, 25, 26 -}; diff --git a/keyboards/lfkeyboards/lfk87/lfk87.h b/keyboards/lfkeyboards/lfk87/lfk87.h index d17c1da26f..ee6f8d47e0 100644 --- a/keyboards/lfkeyboards/lfk87/lfk87.h +++ b/keyboards/lfkeyboards/lfk87/lfk87.h @@ -1,27 +1,10 @@ #pragma once #include "quantum.h" -#include "matrix.h" -#include - -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; #define CLICK_HZ 500 #define CLICK_MS 2 #define CLICK_ENABLED 0 void reset_keyboard_kb(void); -void click(uint16_t freq, uint16_t duration); +void clicking_notes(uint16_t freq, uint16_t duration); diff --git a/keyboards/lfkeyboards/lfk87/post_rules.mk b/keyboards/lfkeyboards/lfk87/post_rules.mk index 044d9754f1..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/lfk87/post_rules.mk +++ b/keyboards/lfkeyboards/lfk87/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/lfkeyboards/lfk87/reva/info.json b/keyboards/lfkeyboards/lfk87/reva/info.json index ad3ad7f877..95b5ff81b7 100644 --- a/keyboards/lfkeyboards/lfk87/reva/info.json +++ b/keyboards/lfkeyboards/lfk87/reva/info.json @@ -6,22 +6,6 @@ "rows": ["D2", "D3", "D4", "D5", "D6", "D7"] }, "diode_direction": "COL2ROW", - "rgblight": { - "hue_steps": 10, - "led_count": 25, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, "layouts": { "LAYOUT_tkl_ansi": { "layout": [ diff --git a/keyboards/lfkeyboards/lfk87/reva/reva.c b/keyboards/lfkeyboards/lfk87/reva/reva.c deleted file mode 100644 index 86289c7a01..0000000000 --- a/keyboards/lfkeyboards/lfk87/reva/reva.c +++ /dev/null @@ -1,16 +0,0 @@ -#include "quantum.h" - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// | | ISSI Col | ISSI Row | -// / | -// Device -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x19, 0x00, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93}, - {0x92, 0x91, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4}, - {0xA3, 0xA2, 0xA1, 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5}, - {0xB3, 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0x00, 0x00, 0x00, 0x00}, - {0xC5, 0x00, 0xC4, 0xC2, 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0x00, 0x00, 0xE3, 0x00}, - {0xE2, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} -}; diff --git a/keyboards/lfkeyboards/lfk87/revc/info.json b/keyboards/lfkeyboards/lfk87/revc/info.json index cf627facdf..cf8c74397f 100644 --- a/keyboards/lfkeyboards/lfk87/revc/info.json +++ b/keyboards/lfkeyboards/lfk87/revc/info.json @@ -6,22 +6,6 @@ "rows": ["F2", "D7", "D6", "D5", "D4", "D3", "F3"] }, "diode_direction": "COL2ROW", - "rgblight": { - "hue_steps": 10, - "led_count": 24, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, "layouts": { "LAYOUT_tkl_ansi": { "layout": [ diff --git a/keyboards/lfkeyboards/lfk87/revc/revc.c b/keyboards/lfkeyboards/lfk87/revc/revc.c deleted file mode 100644 index f14a1f38e5..0000000000 --- a/keyboards/lfkeyboards/lfk87/revc/revc.c +++ /dev/null @@ -1,17 +0,0 @@ -#include "quantum.h" - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// | | ISSI Col | ISSI Row | -// / | -// Device -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x00, 0x95, 0x94, 0x93}, - {0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0x00, 0xA6, 0xA5, 0xA4}, - {0xA2, 0xA1, 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5}, - {0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0x00, 0x00, 0x00, 0x00}, - {0x00, 0xC4, 0xC2, 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0x00, 0x00, 0xE3, 0x00}, - {0xB3, 0xC5, 0xE2, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, - {0x19, 0x92, 0x91, 0xA3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} -}; diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index 154e03fe77..3a1399d693 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -8,15 +8,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -RGBLIGHT_ENABLE = yes # Enable RGB underlight -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms -# Extra source files for IS3731 lighting -SRC += TWIlib.c issi.c lighting.c - DEFAULT_FOLDER = lfkeyboards/lfk78/revc diff --git a/keyboards/lfkeyboards/lfkpad/info.json b/keyboards/lfkeyboards/lfkpad/info.json index a3910b0df5..0a41696cdc 100644 --- a/keyboards/lfkeyboards/lfkpad/info.json +++ b/keyboards/lfkeyboards/lfkpad/info.json @@ -8,26 +8,6 @@ "pid": "0x3231", "device_version": "0.0.1" }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 28, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "matrix_pins": { "cols": ["F1", "F0", "D4", "D6"], "rows": ["D5", "F4", "F6", "F7", "C7", "C6"] diff --git a/keyboards/lfkeyboards/lfkpad/keymaps/pascalpfeil/keymap.c b/keyboards/lfkeyboards/lfkpad/keymaps/pascalpfeil/keymap.c index 94f66e78b2..466adfea47 100644 --- a/keyboards/lfkeyboards/lfkpad/keymaps/pascalpfeil/keymap.c +++ b/keyboards/lfkeyboards/lfkpad/keymaps/pascalpfeil/keymap.c @@ -56,18 +56,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______ ), }; - -const uint8_t number_leds[] = {8, 9, 10, 11, 12, 13, 15, 16, 17}; -const uint8_t number_leds_size = ARRAY_SIZE(number_leds); - -bool led_update_user(led_t led_state) { - for (uint8_t i = 0; i < number_leds_size; i++) - if (led_state.num_lock) - // set to whatever the other leds are doing - // this is needed so that upon disabling num lock, the leds don't stay red - rgblight_sethsv_at(rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val(), numer_leds[i]); - else - rgblight_setrgb_at(RGB_RED, numer_leds[i]); // set to red - - return true; -} diff --git a/keyboards/lfkeyboards/lfkpad/lfkpad.c b/keyboards/lfkeyboards/lfkpad/lfkpad.c index 7d8dd865fb..8769c2c531 100644 --- a/keyboards/lfkeyboards/lfkpad/lfkpad.c +++ b/keyboards/lfkeyboards/lfkpad/lfkpad.c @@ -1,18 +1,9 @@ #include "quantum.h" - -#include #include -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" void matrix_init_kb(void) { matrix_init_user(); -#ifdef ISSI_ENABLE - issi_init(); -#endif - #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -25,48 +16,5 @@ void matrix_scan_kb(void) { wdt_reset(); #endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - - if (twi_last_ready > 1000) { - // It's been way too long since the last ISSI update, reset the I2C bus and start again - dprintf("TWI failed to recover, TWI re-init\n"); - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - - if (isTWIReady()) { - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - - if (issi_device) { - issi_device = 0; - } else { - issi_device = 3; - } - } else { - twi_last_ready++; - } -#endif - matrix_scan_user(); } - -// LFK lighting info -const uint8_t rgb_matrices[] = { 0, 1 }; -const uint8_t rgb_sequence[] = { - 32, 1, 2, 3, - 31, 30, 5, 6, - 28, 27, 7, - 17, 18, 9, 8, - 19, 21, 11, - 22, 14, 12, - 16, 26, - 4, 25, - 13, 24, - 20 -}; diff --git a/keyboards/lfkeyboards/lfkpad/post_rules.mk b/keyboards/lfkeyboards/lfkpad/post_rules.mk index 044d9754f1..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/lfkpad/post_rules.mk +++ b/keyboards/lfkeyboards/lfkpad/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index ec8efa88bf..996d454d74 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -7,12 +7,5 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't installed this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every 250ms - -SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/lighting.c b/keyboards/lfkeyboards/lighting.c deleted file mode 100644 index 5f3ab46e46..0000000000 --- a/keyboards/lfkeyboards/lighting.c +++ /dev/null @@ -1,158 +0,0 @@ -#ifdef ISSI_ENABLE - - -#include -#include -#include -#include "quantum.h" -// #include "lfk87.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" -#include "rgblight.h" - - -extern rgblight_config_t rgblight_config; // Declared in rgblight.c - -#ifdef BACKLIGHT_ENABLE - const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP; -#endif - -// RGB# to ISSI matrix, this is the same across all revisions -const uint8_t rgb_leds[][3][2] = { - {{0, 0}, {0, 0}, {0, 0}}, - {{1, 1}, {2, 3}, {2, 4}}, // RGB1/RGB17 - {{2, 1}, {2, 2}, {3, 4}}, // RGB2/RGB18 - {{3, 1}, {3, 2}, {3, 3}}, // RGB3/RGB19 - {{4, 1}, {4, 2}, {4, 3}}, // RGB4/RGB20 - {{5, 1}, {5, 2}, {5, 3}}, // RGB5/RGB21 - {{6, 1}, {6, 2}, {6, 3}}, // RGB6/RGB22 - {{7, 1}, {7, 2}, {7, 3}}, // RGB6/RGB23 - {{8, 1}, {8, 2}, {8, 3}}, // RGB8/RGB24 - {{1, 9}, {1, 8}, {1, 7}}, // RGB9/RGB25 - {{2, 9}, {2, 8}, {2, 7}}, // RGB10/RGB26 - {{3, 9}, {3, 8}, {3, 7}}, // RGB11/RGB27 - {{4, 9}, {4, 8}, {4, 7}}, // RGB12/RGB28 - {{5, 9}, {5, 8}, {5, 7}}, // RGB13/RGB29 - {{6, 9}, {6, 8}, {6, 7}}, // RGB14/RGB30 - {{7, 9}, {7, 8}, {6, 6}}, // RGB15/RGB31 - {{8, 9}, {7, 7}, {7, 6}} // RGB16/RGB32 - }; - -void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue){ -#ifdef RGBLIGHT_ENABLE - uint8_t matrix = rgb_matrices[0]; - if(rgb_led >= 17){ - matrix = rgb_matrices[1]; - rgb_led -= 16; - } - if(rgb_leds[rgb_led][0][1] != 0){ - activateLED(matrix, rgb_leds[rgb_led][0][0], rgb_leds[rgb_led][0][1], red); - } - if(rgb_leds[rgb_led][1][1] != 0){ - activateLED(matrix, rgb_leds[rgb_led][1][0], rgb_leds[rgb_led][1][1], green); - } - if(rgb_leds[rgb_led][2][1] != 0){ - activateLED(matrix, rgb_leds[rgb_led][2][0], rgb_leds[rgb_led][2][1], blue); - } -#endif -} - -void backlight_set(uint8_t level){ -#ifdef BACKLIGHT_ENABLE - uint8_t pwm_value = 0; - if(level >= BACKLIGHT_LEVELS){ - level = BACKLIGHT_LEVELS; - } - if(level > 0){ - pwm_value = backlight_pwm_map[level-1]; - } - for(int x = 1; x <= 9; x++){ - for(int y = 1; y <= 9; y++){ - activateLED(switch_matrices[0], x, y, pwm_value); - activateLED(switch_matrices[1], x, y, pwm_value); - } - } -#endif -} - -void set_underglow(uint8_t red, uint8_t green, uint8_t blue){ -#ifdef RGBLIGHT_ENABLE - for(uint8_t x = 1; x <= 32; x++){ - set_rgb(x, red, green, blue); - } -#endif -} - - -void rgblight_set(void) { -#ifdef RGBLIGHT_ENABLE - for(uint8_t i = 0; (i < sizeof(rgb_sequence)) && (i < RGBLED_NUM); i++){ - if(rgblight_config.enable){ - set_rgb(rgb_sequence[i], led[i].r, led[i].g, led[i].b); - }else{ - set_rgb(rgb_sequence[i], 0, 0, 0); - } - } -#endif -} - -void set_backlight_by_keymap(uint8_t col, uint8_t row){ -#ifdef RGBLIGHT_ENABLE - uint8_t lookup_value = switch_leds[row][col]; - uint8_t matrix = switch_matrices[0]; - if(lookup_value & 0x80){ - matrix = switch_matrices[1]; - } - issi_devices[0]->led_dirty = 1; - uint8_t led_col = (lookup_value & 0x70) >> 4; - uint8_t led_row = lookup_value & 0x0F; - activateLED(matrix, led_col, led_row, 255); -#endif -} - -void force_issi_refresh(void){ -#ifdef ISSI_ENABLE - issi_devices[0]->led_dirty = true; - update_issi(0, true); - issi_devices[3]->led_dirty = true; - update_issi(3, true); -#endif -} - -void led_test(void){ -#ifdef ISSI_ENABLE -#ifdef WATCHDOG_ENABLE - // This test take a long time to run, disable the WTD until its complete - wdt_disable(); -#endif - backlight_set(0); - set_underglow(0, 0, 0); - force_issi_refresh(); - set_underglow(0, 0, 0); - for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){ - set_rgb(rgb_sequence[x], 255, 0, 0); - force_issi_refresh(); - _delay_ms(250); - set_rgb(rgb_sequence[x], 0, 255, 0); - force_issi_refresh(); - _delay_ms(250); - set_rgb(rgb_sequence[x], 0, 0, 255); - force_issi_refresh(); - _delay_ms(250); - set_rgb(rgb_sequence[x], 0, 0, 0); - force_issi_refresh(); - } -#ifdef WATCHDOG_ENABLE - wdt_enable(WDTO_250MS); -#endif -#endif -} - -void backlight_init_ports(void){ - issi_init(); -} - -#endif - diff --git a/keyboards/lfkeyboards/lighting.h b/keyboards/lfkeyboards/lighting.h deleted file mode 100644 index cb07755c53..0000000000 --- a/keyboards/lfkeyboards/lighting.h +++ /dev/null @@ -1,49 +0,0 @@ -#pragma once - -// rgb_sequence[RGBLED_NUM] -// -// Array used for sequential lighting effects. -// -// Example LFK78 RevC+ RGB Map: -// 27 29 10 9 8 7 6 -// 26 5 -// 25 4 -// 24 3 -// 23 22 21 20 14 15 11 1 2 -// -// const uint8_t rgb_sequence[] = { -// 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, -// 11, 15, 14, 20, 21, 22, 23, 24, 25, 26 -// }; -extern const uint8_t rgb_sequence[RGBLED_NUM]; - -// switch_matrices[] -// -// The ISSI matrices for switch backlighting -// -// Example LFK78 RevC+ - ISSI Device 0, banks 0 and 1: -// switch_matrices[] = {0, 1}; -extern const uint8_t switch_matrices[]; - -// rgb_matrices[] -// The ISSI matrices for RGB Underglow -// -// Example LFK78 RevC+ - ISSI Device 3, banks 0 and 1: -// rgb_matrices[] = {6, 7}; -extern const uint8_t rgb_matrices[]; - -// switch_leds[MATRIX_ROWS][MATRIX_COLS] -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// | | ISSI Col | ISSI Row | -// | | -// Device -extern const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS]; - -void led_test(void); -void force_issi_refresh(void); -void set_backlight(uint8_t level); -void set_underglow(uint8_t red, uint8_t green, uint8_t blue); -void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue); -void set_backlight_by_keymap(uint8_t col, uint8_t row); diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index 20aba2ad6b..84c2fd11dc 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -20,8 +20,6 @@ along with this program. If not, see . #define AUDIO_VOICES #define AUDIO_PIN C6 -#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/mini1800/info.json b/keyboards/lfkeyboards/mini1800/info.json index 6737c1baca..35bb1c15a8 100644 --- a/keyboards/lfkeyboards/mini1800/info.json +++ b/keyboards/lfkeyboards/mini1800/info.json @@ -13,30 +13,6 @@ "rows": ["D7", "E1", "F2", "F0", "F1"] }, "diode_direction": "COL2ROW", - "backlight": { - "driver": "custom", - "levels": 10 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 26, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "F4" - }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c index 75abdc258c..9e3927f545 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c @@ -12,16 +12,6 @@ enum { TD_SPC_SPAM }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/mini1800/keymaps/default/keymap.c b/keyboards/lfkeyboards/mini1800/keymaps/default/keymap.c index 7341bdc053..c2abd12843 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/default/keymap.c +++ b/keyboards/lfkeyboards/mini1800/keymaps/default/keymap.c @@ -6,16 +6,6 @@ enum keymap_layout { SETTINGS, // 0x10 }; -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,-----------------------------------------------------------------------------. diff --git a/keyboards/lfkeyboards/mini1800/mini1800.c b/keyboards/lfkeyboards/mini1800/mini1800.c index e1fa3a988d..2ca87cfdb6 100644 --- a/keyboards/lfkeyboards/mini1800/mini1800.c +++ b/keyboards/lfkeyboards/mini1800/mini1800.c @@ -1,47 +1,22 @@ - -#include -#include -#include #include "mini1800.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" - -#include "quantum.h" +#include uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; uint8_t click_toggle = CLICK_ENABLED; float my_song[][2] = SONG(ZELDA_PUZZLE); -// Colors of the layer indicator LED -// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer -__attribute__((weak)) -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up matrix_init_user(); - set_rgb(31, 0x00, 0x00, 0x00); // Caps lock - set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red #ifndef AUDIO_ENABLE // If we're not using the audio pin, drive it low setPinOutput(C6); writePinLow(C6); #endif _delay_ms(500); -#ifdef ISSI_ENABLE - issi_init(); -#endif #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -54,45 +29,6 @@ void matrix_scan_kb(void) #ifdef WATCHDOG_ENABLE wdt_reset(); #endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } -#endif - // Update layer indicator LED - // - // Not sure how else to reliably do this... TMK has the 'hook_layer_change' - // but can't find QMK equiv - static uint32_t layer_indicator = -1; - if(layer_indicator != layer_state){ - for(uint32_t i=0;; i++){ - // the layer_info list should end with layer 0xFFFF - // it will break this out of the loop and define the unknown layer color - if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ - set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue); - layer_indicator = layer_state; - break; - } - } - } matrix_scan_user(); } @@ -115,7 +51,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) } if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } @@ -126,49 +61,5 @@ void reset_keyboard_kb(void){ wdt_disable(); wdt_reset(); #endif - set_rgb(31, 0x00, 0xFF, 0xFF); - set_rgb(32, 0x00, 0xFF, 0xFF); - force_issi_refresh(); reset_keyboard(); } - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - // Set capslock LED to Blue - if (led_state.caps_lock) { - set_rgb(31, 0x00, 0x00, 0x7F); - } else{ - set_rgb(31, 0x00, 0x00, 0x00); - } - } - return res; -} - -// Lighting info, see lighting.h for details -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; - -// RGB Map: -// 27 29 10 9 8 7 6 -// 26 5 -// 25 4 -// 24 3 -// 23 22 21 20 14 15 11 1 2 -const uint8_t rgb_sequence[] = { - 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 13, 14, 15, 16 -}; - -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// | | ISSI Col | ISSI Row | -// / | -// Device -const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = { - {0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x00, 0x95, 0x94, 0x93, 0x92, 0x91}, - {0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xB6, 0xA4, 0xA3, 0xA2, 0xA1}, - {0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0x00, 0x00, 0x00, 0xB5, 0xB3, 0x49, 0x48}, - {0x47, 0x00, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0x00, 0xC2, 0x59, 0x58, 0x57, 0x56}, - {0x55, 0x51, 0xD6, 0x00, 0x00, 0xE5, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xE3, 0xE2, 0x00, 0xE1, 0x00, 0x00, 0x00, 0x00} -}; diff --git a/keyboards/lfkeyboards/mini1800/mini1800.h b/keyboards/lfkeyboards/mini1800/mini1800.h index c412058096..36797efd8f 100644 --- a/keyboards/lfkeyboards/mini1800/mini1800.h +++ b/keyboards/lfkeyboards/mini1800/mini1800.h @@ -1,22 +1,6 @@ #pragma once -#include "matrix.h" -#include - -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; +#include "quantum.h" #define CLICK_HZ 500 #define CLICK_MS 2 diff --git a/keyboards/lfkeyboards/mini1800/reva/post_rules.mk b/keyboards/lfkeyboards/mini1800/reva/post_rules.mk index 044d9754f1..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/mini1800/reva/post_rules.mk +++ b/keyboards/lfkeyboards/mini1800/reva/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/lfkeyboards/mini1800/reva/rules.mk b/keyboards/lfkeyboards/mini1800/reva/rules.mk index 473bcb10ae..fa0a6ab5b7 100644 --- a/keyboards/lfkeyboards/mini1800/reva/rules.mk +++ b/keyboards/lfkeyboards/mini1800/reva/rules.mk @@ -7,13 +7,5 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms - -# Extra source files for IS3731 lighting -SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/mini1800/revc/post_rules.mk b/keyboards/lfkeyboards/mini1800/revc/post_rules.mk index 044d9754f1..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/mini1800/revc/post_rules.mk +++ b/keyboards/lfkeyboards/mini1800/revc/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/lfkeyboards/mini1800/revc/rules.mk b/keyboards/lfkeyboards/mini1800/revc/rules.mk index 473bcb10ae..fa0a6ab5b7 100644 --- a/keyboards/lfkeyboards/mini1800/revc/rules.mk +++ b/keyboards/lfkeyboards/mini1800/revc/rules.mk @@ -7,13 +7,5 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output -SLEEP_LED_ENABLE = yes - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms - -# Extra source files for IS3731 lighting -SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk b/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk deleted file mode 100644 index 1f0147bd38..0000000000 --- a/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk +++ /dev/null @@ -1,8 +0,0 @@ -# Build Options -# change yes to no to disable -# -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow - -ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled -WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk b/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk deleted file mode 100644 index 1f0147bd38..0000000000 --- a/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk +++ /dev/null @@ -1,8 +0,0 @@ -# Build Options -# change yes to no to disable -# -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow - -ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled -WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/smk65/post_rules.mk b/keyboards/lfkeyboards/smk65/post_rules.mk index 044d9754f1..1b087d7e1e 100644 --- a/keyboards/lfkeyboards/smk65/post_rules.mk +++ b/keyboards/lfkeyboards/smk65/post_rules.mk @@ -1,7 +1,3 @@ -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - ifeq ($(strip $(WATCHDOG_ENABLE)), yes) OPT_DEFS += -DWATCHDOG_ENABLE endif diff --git a/keyboards/lfkeyboards/smk65/revb/config.h b/keyboards/lfkeyboards/smk65/revb/config.h index c758caa92c..38b0529178 100644 --- a/keyboards/lfkeyboards/smk65/revb/config.h +++ b/keyboards/lfkeyboards/smk65/revb/config.h @@ -30,8 +30,6 @@ along with this program. If not, see . #define AUDIO_VOICES #define AUDIO_PIN C6 -#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/lfkeyboards/smk65/revb/info.json b/keyboards/lfkeyboards/smk65/revb/info.json index 39df87cc23..148465d27d 100644 --- a/keyboards/lfkeyboards/smk65/revb/info.json +++ b/keyboards/lfkeyboards/smk65/revb/info.json @@ -2,29 +2,6 @@ "usb": { "pid": "0x565B" }, - "backlight": { - "levels": 8 - }, - "rgblight": { - "driver": "custom", - "hue_steps": 10, - "led_count": 20, - "animations": { - "breathing": true, - "rainbow_mood": true, - "rainbow_swirl": true, - "snake": true, - "knight": true, - "christmas": true, - "static_gradient": true, - "rgb_test": true, - "alternating": true, - "twinkle": true - } - }, - "ws2812": { - "pin": "C7" - }, "processor": "at90usb646", "bootloader": "atmel-dfu", "layout_aliases": { diff --git a/keyboards/lfkeyboards/smk65/revb/revb.c b/keyboards/lfkeyboards/smk65/revb/revb.c index 32dbce8fd5..8eb9b9afe2 100644 --- a/keyboards/lfkeyboards/smk65/revb/revb.c +++ b/keyboards/lfkeyboards/smk65/revb/revb.c @@ -12,14 +12,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include -#include -#include #include "revb.h" -#include "debug.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" +#include uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; @@ -40,10 +34,6 @@ void matrix_init_kb(void) setPinOutput(C6); writePinLow(C6); #endif - -#ifdef ISSI_ENABLE - issi_init(); -#endif } void matrix_scan_kb(void) @@ -75,7 +65,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) } if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } @@ -88,27 +77,3 @@ void reset_keyboard_kb(void){ #endif reset_keyboard(); } - -// LFK lighting info -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; -// const uint8_t rgb_sequence[] = { -// 14, 24, 23, 22, 21, 20, 19, 18, 26, 25, 28, 29, -// 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 -// }; -const uint8_t rgb_sequence[] = { - 25, 28, 29, - 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 -}; -// Maps switch LEDs from Row/Col to ISSI matrix. -// Value breakdown: -// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | -// / \ ISSI Col | ISSI Row | -// matrix idx -// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = -// KEYMAP( -// 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, -// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, -// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, -// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, -// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1); diff --git a/keyboards/lfkeyboards/smk65/revb/revb.h b/keyboards/lfkeyboards/smk65/revb/revb.h index 6b63eb7944..61973b0b9d 100644 --- a/keyboards/lfkeyboards/smk65/revb/revb.h +++ b/keyboards/lfkeyboards/smk65/revb/revb.h @@ -15,23 +15,6 @@ along with this program. If not, see . #pragma once #include "quantum.h" -#include "matrix.h" -#include - -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; #define CLICK_HZ 500 #define CLICK_MS 2 diff --git a/keyboards/lfkeyboards/smk65/revb/rules.mk b/keyboards/lfkeyboards/smk65/revb/rules.mk index 1bd6ebc6a6..e69de29bb2 100644 --- a/keyboards/lfkeyboards/smk65/revb/rules.mk +++ b/keyboards/lfkeyboards/smk65/revb/rules.mk @@ -1,9 +0,0 @@ -# Build Options -# change yes to no to disable -# -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output - -# Extra source files for IS3731 lighting -SRC += TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/smk65/revf/info.json b/keyboards/lfkeyboards/smk65/revf/info.json index 50c039b76c..63e9d0abc7 100644 --- a/keyboards/lfkeyboards/smk65/revf/info.json +++ b/keyboards/lfkeyboards/smk65/revf/info.json @@ -4,10 +4,6 @@ }, "processor": "atmega32u4", "bootloader": "halfkay", - "rgblight": { - "driver": "custom", - "led_count": 28 - }, "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/lfkeyboards/smk65/revf/rules.mk b/keyboards/lfkeyboards/smk65/revf/rules.mk index e372473a50..e69de29bb2 100644 --- a/keyboards/lfkeyboards/smk65/revf/rules.mk +++ b/keyboards/lfkeyboards/smk65/revf/rules.mk @@ -1,4 +0,0 @@ -# Build Options -# change yes to no to disable -# -RGBLIGHT_ENABLE = no # TODO: Enable keyboard RGB underglow diff --git a/keyboards/woodkeys/meira/TWIlib.c b/keyboards/woodkeys/meira/TWIlib.c deleted file mode 100755 index 89e03a73d4..0000000000 --- a/keyboards/woodkeys/meira/TWIlib.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * TWIlib.c - * - * Created: 6/01/2014 10:41:33 PM - * Author: Chris Herring - */ - -#include -#include -#include "TWIlib.h" -#include -#include "print.h" - -// Global transmit buffer -volatile uint8_t *TWITransmitBuffer; -// Global receive buffer -volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; -// Buffer indexes -volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. -int RXBuffIndex; // Current index in the receive buffer -// Buffer lengths -int TXBuffLen; // The total length of the transmit buffer -int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) - -TWIInfoStruct TWIInfo; - -void TWIInit(void) -{ - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWIInfo.repStart = 0; - // Set pre-scalers (no pre-scaling) - TWSR = 0; - // Set bit rate - TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; - // Enable TWI and interrupt - TWCR = (1 << TWIE) | (1 << TWEN); -} - -uint8_t isTWIReady(void) -{ - if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) ) - { - -// xprintf("i2c ready\n"); - return 1; - } - else - { - if(TWIInfo.mode == Initializing){ - switch(TWIInfo.errorCode){ - case TWI_SUCCESS: - break; - case TWI_NO_RELEVANT_INFO: - - break; - case TWI_LOST_ARBIT: - case TWI_MT_DATA_NACK: - // Some kind of I2C error, reset and re-init - xprintf("I2C init error: %d\n", TWIInfo.errorCode); - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - break; - default: - xprintf("Other i2c init error: %d\n", TWIInfo.errorCode); - } - } - return 0; - } -} - - -void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking) -{ - // Wait until ready - while (!isTWIReady()) {_delay_us(1);} - // Reset the I2C stuff - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - // Set repeated start mode - TWIInfo.repStart = repStart; - // Copy transmit info to global variables - TWITransmitBuffer = (uint8_t *)TXdata; - TXBuffLen = dataLen; - TXBuffIndex = 0; - - // If a repeated start has been sent, then devices are already listening for an address - // and another start does not need to be sent. - if (TWIInfo.mode == RepeatedStartSent) - { - TWIInfo.mode = Initializing; - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWISendTransmit(); // Send the data - } - else // Otherwise, just send the normal start signal to begin transmission. - { - TWIInfo.mode = Initializing; - TWISendStart(); - } - if(blocking){ - // Wait until ready - while (!isTWIReady()){_delay_us(1);} - } -} - - -// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart) -// { -// if (dataLen <= TXMAXBUFLEN) -// { -// // Wait until ready -// while (!isTWIReady()) {_delay_us(1);} -// // Set repeated start mode -// TWIInfo.repStart = repStart; -// // Copy data into the transmit buffer -// uint8_t *data = (uint8_t *)TXdata; -// for (int i = 0; i < dataLen; i++) -// { -// TWITransmitBuffer[i] = data[i]; -// } -// // Copy transmit info to global variables -// TXBuffLen = dataLen; -// TXBuffIndex = 0; - -// // If a repeated start has been sent, then devices are already listening for an address -// // and another start does not need to be sent. -// if (TWIInfo.mode == RepeatedStartSent) -// { -// TWIInfo.mode = Initializing; -// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer -// TWISendTransmit(); // Send the data -// } -// else // Otherwise, just send the normal start signal to begin transmission. -// { -// TWIInfo.mode = Initializing; -// TWISendStart(); -// } - -// } -// else -// { -// return 1; // return an error if data length is longer than buffer -// } -// return 0; -// } - -uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart) -{ - // Check if number of bytes to read can fit in the RXbuffer - if (bytesToRead < RXMAXBUFLEN) - { - // Reset buffer index and set RXBuffLen to the number of bytes to read - RXBuffIndex = 0; - RXBuffLen = bytesToRead; - // Create the one value array for the address to be transmitted - uint8_t TXdata[1]; - // Shift the address and AND a 1 into the read write bit (set to write mode) - TXdata[0] = (TWIaddr << 1) | 0x01; - // Use the TWITransmitData function to initialize the transfer and address the slave - TWITransmitData(TXdata, 1, repStart, 0); - } - else - { - return 0; - } - return 1; -} - -ISR (TWI_vect) -{ - switch (TWI_STATUS) - { - // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- // - case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received - // Set mode to Master Transmitter - TWIInfo.mode = MasterTransmitter; - case TWI_START_SENT: // Start condition has been transmitted - case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received - if (TXBuffIndex < TXBuffLen) // If there is more data to send - { - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendTransmit(); // Send the data - } - // This transmission is complete however do not release bus yet - else if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MASTER RECEIVER ----\/ ---- // - - case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received - // Switch to Master Receiver mode - TWIInfo.mode = MasterReceiver; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // This transmission is complete however do not release bus yet - if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MT and MR common ----\/ ---- // - - case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received - case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received - case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received - case TWI_LOST_ARBIT: // Arbitration has been lost - // Return error and send stop and set mode to ready - if (TWIInfo.repStart) - { - TWIInfo.errorCode = TWI_STATUS; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = TWI_STATUS; - TWISendStop(); - } - break; - case TWI_REP_START_SENT: // Repeated start has been transmitted - // Set the mode but DO NOT clear TWINT as the next data is not yet ready - TWIInfo.mode = RepeatedStartSent; - break; - - // ----\/ ---- SLAVE RECEIVER ----\/ ---- // - - // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY - - // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- // - - // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY - - // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- // - case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition - // Rather, it is there to be manually set between operations - break; - case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error - TWIInfo.errorCode = TWI_ILLEGAL_START_STOP; - TWIInfo.mode = Ready; - TWISendStop(); - break; - } - -} diff --git a/keyboards/woodkeys/meira/TWIlib.h b/keyboards/woodkeys/meira/TWIlib.h deleted file mode 100755 index 8ba261c6e5..0000000000 --- a/keyboards/woodkeys/meira/TWIlib.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * TWIlib.h - * - * Created: 6/01/2014 10:38:42 PM - * Author: Chris Herring - */ - - -#ifndef TWILIB_H_ -#define TWILIB_H_ -// TWI bit rate -#define TWI_FREQ 400000 -// Get TWI status -#define TWI_STATUS (TWSR & 0xF8) -// Transmit buffer length -#define TXMAXBUFLEN 20 -// Receive buffer length -#define RXMAXBUFLEN 20 - -typedef enum { - Ready, - Initializing, - RepeatedStartSent, - MasterTransmitter, - MasterReceiver, - SlaceTransmitter, - SlaveReciever - } TWIMode; - - typedef struct TWIInfoStruct{ - TWIMode mode; - uint8_t errorCode; - uint8_t repStart; - }TWIInfoStruct; - -extern TWIInfoStruct TWIInfo; - -// TWI Status Codes -#define TWI_START_SENT 0x08 // Start sent -#define TWI_REP_START_SENT 0x10 // Repeated Start sent -// Master Transmitter Mode -#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received -#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received -#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received -#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received -// Master Receiver Mode -#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received -#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received -#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned -#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned - -// Miscellaneous States -#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost -#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available -#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected -#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only - - -#define TWISendStart() (TWCR = (1<. /* key matrix size */ #define MATRIX_ROWS 4 #define MATRIX_COLS 12 - -#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} diff --git a/keyboards/woodkeys/meira/featherble/config.h b/keyboards/woodkeys/meira/featherble/config.h index eab64b36b9..fd224b2d50 100644 --- a/keyboards/woodkeys/meira/featherble/config.h +++ b/keyboards/woodkeys/meira/featherble/config.h @@ -32,7 +32,6 @@ along with this program. If not, see . // Column pins to demux in LSB order #define MATRIX_COL_PINS { C7, B7, B6, C6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } #define MATRIX_COL_PINS_SCANNED { C7, B7, B6, C6 } -#define LED_EN_PIN D2 #define AUDIO_PIN B5 #define AUDIO_VOICES diff --git a/keyboards/woodkeys/meira/info.json b/keyboards/woodkeys/meira/info.json index 5905c00d2d..5fbcc9deaf 100644 --- a/keyboards/woodkeys/meira/info.json +++ b/keyboards/woodkeys/meira/info.json @@ -8,16 +8,6 @@ "pid": "0x6061", "device_version": "0.0.1" }, - "backlight": { - "driver": "custom", - "levels": 10 - }, - "rgblight": { - "led_count": 15 - }, - "ws2812": { - "pin": "D3" - }, "processor": "atmega32u4", "bootloader": "caterina", "layout_aliases": { diff --git a/keyboards/woodkeys/meira/issi.c b/keyboards/woodkeys/meira/issi.c deleted file mode 100755 index 600a465ba3..0000000000 --- a/keyboards/woodkeys/meira/issi.c +++ /dev/null @@ -1,286 +0,0 @@ -#ifdef ISSI_ENABLE - -#include -#include -#include -#include -#include -#include -#include "issi.h" -#include "print.h" -#include "TWIlib.h" - -#define ISSI_ADDR_DEFAULT 0xE8 - -#define ISSI_REG_CONFIG 0x00 -#define ISSI_REG_CONFIG_PICTUREMODE 0x00 -#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08 - -#define ISSI_CONF_PICTUREMODE 0x00 -#define ISSI_CONF_AUTOFRAMEMODE 0x04 -#define ISSI_CONF_AUDIOMODE 0x08 - -#define ISSI_REG_PICTUREFRAME 0x01 - -#define ISSI_REG_SHUTDOWN 0x0A -#define ISSI_REG_AUDIOSYNC 0x06 - -#define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' -uint8_t control[8][9] = { - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; -ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0}; - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif - -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -#define I2C_WRITE 0 -#define F_SCL 400000UL // SCL frequency -#define Prescaler 1 -#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2) - -uint8_t i2c_start(uint8_t address) -{ - // reset TWI control register - TWCR = 0; - // transmit START condition - TWCR = (1<> 1; -// uint8_t control_reg = (y << 1) | (matrix & 0x01); -// uint8_t pwm_reg = 0; -// switch(matrix & 0x01){ -// case 0: -// pwm_reg = 0x24; -// break; -// case 1: -// pwm_reg = 0x2C; -// break; -// } -// pwm_reg += (y << 4) + x; -// xprintf(" device: %02X\n", device); -// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]); -// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm); -// writeRegister8(device, 0, control_reg, control[matrix][y]); -// writeRegister8(device, 0, control_reg + 0x12, control[matrix][y]); -// writeRegister8(device, 0, pwm_reg, pwm); -// } - -void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm) -{ - uint8_t device_addr = (matrix & 0x06) >> 1; - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device == 0){ - return; - } - // xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm); - uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0... - uint8_t y = cy - 1; // creating them once for less confusion - uint8_t control_reg = (y << 1) | (matrix & 0x01); - if(pwm == 0){ - cbi(device->led_ctrl[control_reg], x); - cbi(device->led_blink_ctrl[control_reg], x); - }else{ - sbi(device->led_ctrl[control_reg], x); - sbi(device->led_blink_ctrl[control_reg], x); - } - uint8_t pwm_reg = 0; - switch(matrix & 0x01){ - case 0: - pwm_reg = 0x00; - break; - case 1: - pwm_reg = 0x08; - break; - } - pwm_reg += (y << 4) + x; - // xprintf(" device_addr: %02X\n", device_addr); - // xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]); - // xprintf(" pwm: %02X %02X\n", pwm_reg, pwm); - // writeRegister8(device_addr, 0, control_reg, control[matrix][y]); - device->led_pwm[pwm_reg] = pwm; - device->led_dirty = 1; - - // writeRegister8(device_addr, 0, control_reg + 0x12, control[matrix][y]); - // writeRegister8(device_addr, 0, pwm_reg, pwm); -} - -void update_issi(uint8_t device_addr, uint8_t blocking) -{ - // This seems to take about 6ms - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device != 0){ - if(device->fn_dirty){ - device->fn_dirty = 0; - setFrame(device_addr, ISSI_BANK_FUNCTIONREG); - TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1); - } - if(device->led_dirty){ - device->led_dirty = 0; - setFrame(device_addr, 0); - TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking); - } - } -} - -void issi_init(void) -{ - // Set LED_EN/SDB high to enable the chip - xprintf("Enabing SDB on pin: %d\n", LED_EN_PIN); - _SFR_IO8((LED_EN_PIN >> 4) + 1) &= ~_BV(LED_EN_PIN & 0xF); // IN - _SFR_IO8((LED_EN_PIN >> 4) + 2) |= _BV(LED_EN_PIN & 0xF); // HI - TWIInit(); - for(uint8_t device_addr = 0; device_addr < 4; device_addr++){ - xprintf("ISSI Init device: %d\n", device_addr); - // If this device has been previously allocated, free it - if(issi_devices[device_addr] != 0){ - free(issi_devices[device_addr]); - } - // Try to shutdown the device, if this fails skip this device - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - while (!isTWIReady()){_delay_us(1);} - if(TWIInfo.errorCode != 0xFF){ - xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode); - continue; - } - // Allocate the device structure - calloc zeros it for us - ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1); - issi_devices[device_addr] = device; - device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->fn_register_addr = 0; - device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->led_register_addr = 0; - // set dirty bits so that all of the buffered data is written out - device->fn_dirty = 1; - device->led_dirty = 1; - update_issi(device_addr, 1); - // Set the function register to picture mode - // device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE; - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - } - - // Shutdown and set all registers to 0 - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - // for(uint8_t bank = 0; bank <= 7; bank++){ - // for (uint8_t reg = 0x00; reg <= 0xB3; reg++) { - // writeRegister8(device_addr, bank, reg, 0x00); - // } - // } - // for (uint8_t reg = 0; reg <= 0x0C; reg++) { - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00); - // } - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE); - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - // picture mode - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01); - - //Enable blink - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B); - - //Enable Breath - -} - -#endif diff --git a/keyboards/woodkeys/meira/issi.h b/keyboards/woodkeys/meira/issi.h deleted file mode 100755 index 74379ddbc8..0000000000 --- a/keyboards/woodkeys/meira/issi.h +++ /dev/null @@ -1,39 +0,0 @@ -#pragma once - -#ifdef ISSI_ENABLE - -typedef struct ISSIDeviceStruct{ - uint8_t fn_dirty; // function registers need to be resent - uint8_t fn_device_addr; - uint8_t fn_register_addr; - uint8_t fn_registers[13]; - uint8_t led_dirty; // LED data has changed and needs to be resent - uint8_t led_device_addr; - uint8_t led_register_addr; - uint8_t led_ctrl[18]; - uint8_t led_blink_ctrl[18]; - uint8_t led_pwm[144]; -}ISSIDeviceStruct; - -extern ISSIDeviceStruct *issi_devices[]; - -// Low level commands- 'device' is the 2-bit i2c id. -void issi_init(void); -void set_shutdown(uint8_t device, uint8_t shutdown); -void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data); - -// Higher level, no device is given, but it is calculated from 'matrix' -// Each device has 2 blocks, max of 4 devices: -// Device | Block = Matrix -// 0 A 0 -// 0 B 1 -// 1 A 2 -// 1 B 3 -// 2 A 4 -// 2 B 5 -// 3 A 6 -// 3 B 7 -void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm); -void update_issi(uint8_t device_addr, uint8_t blocking); - -#endif diff --git a/keyboards/woodkeys/meira/keymaps/cole/keymap.c b/keyboards/woodkeys/meira/keymaps/cole/keymap.c index b85da25a28..91a03d8861 100644 --- a/keyboards/woodkeys/meira/keymaps/cole/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/cole/keymap.c @@ -14,7 +14,6 @@ * along with this program. If not, see . */ #include QMK_KEYBOARD_H -#include "lighting.h" #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings diff --git a/keyboards/woodkeys/meira/keymaps/default/keymap.c b/keyboards/woodkeys/meira/keymaps/default/keymap.c index af3dca37a8..8aedffc675 100644 --- a/keyboards/woodkeys/meira/keymaps/default/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/default/keymap.c @@ -14,7 +14,6 @@ * along with this program. If not, see . */ #include QMK_KEYBOARD_H -#include "lighting.h" #ifdef RGBLIGHT_ENABLE // Following line allows macro to read current RGB settings diff --git a/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c b/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c index 8057bcf2b4..c95a3183b1 100644 --- a/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/grahampheath/keymap.c @@ -268,15 +268,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; - case BL_TOGG: -#ifdef ISSI_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - issi_init(); - } -#endif - return false; - break; case BL_STEP: if (record->event.pressed) { print("Stepping backlight\n"); diff --git a/keyboards/woodkeys/meira/keymaps/grahampheath/rules.mk b/keyboards/woodkeys/meira/keymaps/grahampheath/rules.mk index 1c61fe1c12..c4e55a1a65 100644 --- a/keyboards/woodkeys/meira/keymaps/grahampheath/rules.mk +++ b/keyboards/woodkeys/meira/keymaps/grahampheath/rules.mk @@ -1,5 +1,3 @@ AUDIO_ENABLE = yes # Audio output on port C6 LTO_ENABLE = yes # -4-7k MOUSEKEY_ENABLE = no # Mouse keys(-47kb) -ISSI_ENABLE = no -BACKLIGHT_ENABLE = no \ No newline at end of file diff --git a/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c b/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c index 8e3c41c332..cf1b2b8ce6 100644 --- a/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c +++ b/keyboards/woodkeys/meira/keymaps/takmiya/keymap.c @@ -14,7 +14,6 @@ * along with this program. If not, see . */ #include QMK_KEYBOARD_H -#include "lighting.h" #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings @@ -189,15 +188,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; - case BL_TOGG: -#ifdef ISSI_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - issi_init(); - } -#endif - return false; - break; case BL_STEP: if (record->event.pressed) { print("Stepping backlight\n"); diff --git a/keyboards/woodkeys/meira/lighting.c b/keyboards/woodkeys/meira/lighting.c deleted file mode 100755 index 6a17250a29..0000000000 --- a/keyboards/woodkeys/meira/lighting.c +++ /dev/null @@ -1,84 +0,0 @@ -#ifdef ISSI_ENABLE - - -#include -#include -#include -#include "meira.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" -#include "audio.h" - - -const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP; - - const uint8_t switch_matrices[] = {0, 1}; - -void backlight_set(uint8_t level){ -#ifdef BACKLIGHT_ENABLE - uint8_t pwm_value = 0; - if(level >= BACKLIGHT_LEVELS){ - level = BACKLIGHT_LEVELS; - } - if(level > 0){ - pwm_value = backlight_pwm_map[level-1]; - } - xprintf("BACKLIGHT_LEVELS: %d\n", BACKLIGHT_LEVELS); - xprintf("backlight_set level: %d pwm: %d\n", level, pwm_value); - for(int x = 1; x <= 9; x++){ - for(int y = 1; y <= 9; y++){ - activateLED(switch_matrices[0], x, y, pwm_value); - activateLED(switch_matrices[1], x, y, pwm_value); - } - } -#endif -} - - - -void set_backlight_by_keymap(uint8_t col, uint8_t row){ -// dprintf("LED: %02X, %d %d %d\n", lookup_value, matrix, led_col, led_row); -// activateLED(matrix, led_col, led_row, 255); -} - -void force_issi_refresh(void){ - issi_devices[0]->led_dirty = true; - update_issi(0, true); - issi_devices[3]->led_dirty = true; - update_issi(3, true); -} - -void led_test(void){ -#ifdef WATCHDOG_ENABLE - // This test take a long time to run, disable the WTD until its complete - wdt_disable(); -#endif - backlight_set(0); - force_issi_refresh(); -// for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){ -// set_rgb(rgb_sequence[x], 255, 0, 0); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 255, 0); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 0, 255); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 0, 0); -// force_issi_refresh(); -// } -#ifdef WATCHDOG_ENABLE - wdt_enable(WDTO_250MS); -#endif -} - -void backlight_init_ports(void){ - xprintf("backlight_init_ports\n"); - issi_init(); -} - -#endif - diff --git a/keyboards/woodkeys/meira/lighting.h b/keyboards/woodkeys/meira/lighting.h deleted file mode 100755 index 42fee8ac92..0000000000 --- a/keyboards/woodkeys/meira/lighting.h +++ /dev/null @@ -1,6 +0,0 @@ -#pragma once - -void led_test(void); -void force_issi_refresh(void); -void set_backlight(uint8_t level); -void set_backlight_by_keymap(uint8_t col, uint8_t row); diff --git a/keyboards/woodkeys/meira/matrix.c b/keyboards/woodkeys/meira/matrix.c index 145750a418..e08782dd40 100644 --- a/keyboards/woodkeys/meira/matrix.c +++ b/keyboards/woodkeys/meira/matrix.c @@ -19,18 +19,11 @@ along with this program. If not, see . /* * scan matrix */ -#include -#include -#if defined(__AVR__) -#include -#endif +#include "matrix.h" #include "meira.h" #include "wait.h" #include "print.h" #include "debug.h" -#include "util.h" -#include "matrix.h" -#include "config.h" #include "timer.h" #ifndef DEBOUNCE diff --git a/keyboards/woodkeys/meira/meira.c b/keyboards/woodkeys/meira/meira.c index 1f4c2557b0..cca87a1b51 100644 --- a/keyboards/woodkeys/meira/meira.c +++ b/keyboards/woodkeys/meira/meira.c @@ -14,24 +14,12 @@ * along with this program. If not, see . */ #include "meira.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "quantum.h" - -extern void backlight_set(uint8_t level); void matrix_init_kb(void) { debug_enable=true; print("meira matrix_init_kb\n"); -#ifdef ISSI_ENABLE - issi_init(); -#endif -#ifdef BACKLIGHT_ENABLE - backlight_set(5); -#endif #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -47,30 +35,6 @@ void matrix_scan_kb(void) { #ifdef WATCHDOG_ENABLE wdt_reset(); -#endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - xprintf("TWI failed to recover, TWI re-init\n"); - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } #endif matrix_scan_user(); } @@ -80,9 +44,8 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // set_backlight_by_keymap(record->event.key.col, record->event.key.row); if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } - return process_record_user(keycode, record); + return process_record_user(keycode, record); } void reset_keyboard_kb(void){ diff --git a/keyboards/woodkeys/meira/meira.h b/keyboards/woodkeys/meira/meira.h index 46d9791e48..cdf5b5adbe 100644 --- a/keyboards/woodkeys/meira/meira.h +++ b/keyboards/woodkeys/meira/meira.h @@ -16,6 +16,5 @@ #pragma once #include "quantum.h" -#include "issi.h" void reset_keyboard_kb(void); diff --git a/keyboards/woodkeys/meira/post_rules.mk b/keyboards/woodkeys/meira/post_rules.mk deleted file mode 100644 index 5d85581c6e..0000000000 --- a/keyboards/woodkeys/meira/post_rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -SRC += matrix.c TWIlib.c issi.c lighting.c - -#ifeq ($(strip $(ISSI_ENABLE)), yes) -# OPT_DEFS += -DISSI_ENABLE -#endif - -#ifeq ($(strip $(WATCHDOG_ENABLE)), yes) -# OPT_DEFS += -DWATCHDOG_ENABLE -#endif diff --git a/keyboards/woodkeys/meira/promicro/config.h b/keyboards/woodkeys/meira/promicro/config.h index 6c52f0fd11..6fda5d7ab3 100644 --- a/keyboards/woodkeys/meira/promicro/config.h +++ b/keyboards/woodkeys/meira/promicro/config.h @@ -33,8 +33,6 @@ along with this program. If not, see . #define MATRIX_COL_PINS { B1, B3, B2, B6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } #define MATRIX_COL_PINS_SCANNED { B1, B3, B2, B6 } -#define LED_EN_PIN D2 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/woodkeys/meira/rules.mk b/keyboards/woodkeys/meira/rules.mk index 63586244c0..bad7949ec0 100644 --- a/keyboards/woodkeys/meira/rules.mk +++ b/keyboards/woodkeys/meira/rules.mk @@ -7,11 +7,11 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Meira -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes +SRC += matrix.c DEFAULT_FOLDER = woodkeys/meira/promicro