mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/master' into develop

Browse source
This commit is contained in:
QMK Bot 2023-11-29 02:49:27 +00:00
commit 6524d5354a
5 changed files with 16 additions and 15 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
docs/feature_combo.md
View file

@ -345,10 +345,9 @@ is not set, all other layers will reference themselves.
}
return layer; // important if default is not in case.
}
```
The equivalent definition using the combo macros is this:
The equivalent definition using the combo macros is this:
```c
COMBO_REF_LAYER(_DVORAK, _QWERTY)

2
docs/feature_oled_driver.md
View file

@ -213,7 +213,7 @@ These configuration options should be placed in `config.h`. Example:
|`OLED_SCROLL_TIMEOUT_RIGHT`|*Not defined* |Scroll timeout direction is right when defined, left when undefined. |
|`OLED_TIMEOUT` |`60000` |Turns off the OLED screen after 60000ms of screen update inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. |
|`OLED_UPDATE_INTERVAL` |`0` (`50` for split keyboards) |Set the time interval for updating the OLED display in ms. This will improve the matrix scan rate. |
|`OLED_UPDATE_PROCESS_LIMIT'|`1` |Set the number of dirty blocks to render per loop. Increasing may degrade performance. |
|`OLED_UPDATE_PROCESS_LIMIT`|`1` |Set the number of dirty blocks to render per loop. Increasing may degrade performance. |
### I2C Configuration
|Define |Default |Description |

8
docs/feature_pointing_device.md
View file

@ -800,9 +800,11 @@ layer_state_t layer_state_set_user(layer_state_t state) {
#### Set different target layer when a particular layer is active:
The below code will change the auto mouse layer target to `_MOUSE_LAYER_2` when `_DEFAULT_LAYER_2` is highest default layer state.
*NOTE: that `auto_mouse_layer_off` is used here instead of `remove_auto_mouse_layer` as `default_layer_state_set_*` stack is separate from the `layer_state_set_*` stack* if something similar was to be done in `layer_state_set_user `state = remove_auto_mouse_layer(state, false)` should be used instead
*ADDITIONAL NOTE: `AUTO_MOUSE_TARGET_LAYER` is checked if already set to avoid deactivating the target layer unless needed*
The below code will change the auto mouse layer target to `_MOUSE_LAYER_2` when `_DEFAULT_LAYER_2` is highest default layer state.
*NOTE: that `auto_mouse_layer_off` is used here instead of `remove_auto_mouse_layer` as `default_layer_state_set_*` stack is separate from the `layer_state_set_*` stack*, if something similar was to be done in `layer_state_set_user`, `state = remove_auto_mouse_layer(state, false)` should be used instead.
*ADDITIONAL NOTE: `AUTO_MOUSE_TARGET_LAYER` is checked if already set to avoid deactivating the target layer unless needed*.
```c
// in keymap.c

2
docs/feature_split_keyboard.md
View file

@ -205,7 +205,7 @@ This sets the pin to be used for serial communication. If you're not using seria
However, if you are using serial and I<sup>2</sup>C on the board, you will need to set this, and to something other than D0 and D1 (as these are used for I<sup>2</sup>C communication).
```c
#define SELECT_SOFT_SERIAL_SPEED {#}`
#define SELECT_SOFT_SERIAL_SPEED {#}
```
If you're having issues with serial communication, you can change this value, as it controls the communication speed for serial. The default is 1, and the possible values are:

14
docs/newbs_building_firmware_workflow.md
View file

@ -143,13 +143,13 @@ Replace `username.json` with the JSON file name that was downloaded from [QMK Co
If you have completed all steps correctly, the folder `qmk_keymap/` will contain the following files:
```
|-- .github
| `-- workflows
| `-- build.yml
|-- rules.mk
|-- config.h
|-- source.c
|-- username.json
├── .github
│   └── workflows
│   └── build.yml
├── rules.mk
├── config.h
├── source.c
└── username.json
```
To commit and push them into GitHub, run the following commands (replacing `gh-username` with your GitHub user name):