remove custom i2c and led driver
This commit is contained in:
mechmerlin
parent
b8c5efa555
commit
77a7e3c91f
6 changed files with 69 additions and 285 deletions
|
|
@ -1,94 +0,0 @@
|
||||||
/* Copyright 2017 Sebastian Kaim
|
|
||||||
*
|
|
||||||
* This program is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 2 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
|
|
||||||
#include "backlight_ps2avrGB.h"
|
|
||||||
#define sbi(reg,bit) reg |= (_BV(bit))
|
|
||||||
#define cbi(reg,bit) reg &= (~_BV(bit))
|
|
||||||
#define PWM10 WGM10
|
|
||||||
#define PWM11 WGM11
|
|
||||||
#define COM1x1 COM1B1
|
|
||||||
#define OCR1x OCR1B
|
|
||||||
|
|
||||||
void backlight_init_ports(void)
|
|
||||||
{
|
|
||||||
#if BACKLIGHT_ON_STATE == 0
|
|
||||||
backlight_off();
|
|
||||||
#else
|
|
||||||
backlight_on();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// setup pwm
|
|
||||||
// this bitmagic is sourced from the original firmware
|
|
||||||
/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
|
|
||||||
TCNT1H = 0;
|
|
||||||
TCNT1L = 0;
|
|
||||||
sbi(TIMSK, TOIE1);
|
|
||||||
OCR1BH = 0;
|
|
||||||
OCR1BL = 0;
|
|
||||||
cbi(TCCR1A,PWM11);
|
|
||||||
sbi(TCCR1A,PWM10);
|
|
||||||
sbi(TCCR1A,COM1B1);
|
|
||||||
cbi(TCCR1A,COM1B0);*/
|
|
||||||
ICR1 = 0xFFFF;
|
|
||||||
|
|
||||||
TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
|
|
||||||
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
|
||||||
|
|
||||||
backlight_init();
|
|
||||||
}
|
|
||||||
|
|
||||||
void backlight_set(uint8_t level)
|
|
||||||
{
|
|
||||||
if( level == 0 ) {
|
|
||||||
backlight_off();
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
backlight_on();
|
|
||||||
/*uint8_t pwm = get_pwm_for_brightness(level);
|
|
||||||
set_backlight_pwm(pwm);
|
|
||||||
TCCR1A |= _BV(COM1x1);
|
|
||||||
OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#define PWM_MAX 0xFF
|
|
||||||
uint8_t get_pwm_for_brightness(uint8_t level)
|
|
||||||
{
|
|
||||||
// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
|
|
||||||
uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
|
|
||||||
return (uint8_t)brightness;
|
|
||||||
}
|
|
||||||
|
|
||||||
void backlight_on(void)
|
|
||||||
{
|
|
||||||
//_SFR_IO8(0x12) |= _BV(0x4);
|
|
||||||
LED_PIN |= BACKLIGHT_PORT_NUM;
|
|
||||||
}
|
|
||||||
|
|
||||||
void backlight_off(void)
|
|
||||||
{
|
|
||||||
//_SFR_IO8(0x12) &= ~_BV(0x4);
|
|
||||||
LED_PIN &= ~BACKLIGHT_PORT_NUM;
|
|
||||||
}
|
|
||||||
|
|
||||||
void set_backlight_pwm(uint8_t level) {
|
|
||||||
// this does not work (yet)
|
|
||||||
//OCR1B = level;
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // BACKLIGHT_ENABLE
|
|
||||||
|
|
@ -1,35 +0,0 @@
|
||||||
/* Copyright 2017 Sebastian Kaim
|
|
||||||
*
|
|
||||||
* This program is free software: you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation, either version 2 of the License, or
|
|
||||||
* (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License
|
|
||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#if defined(__AVR__)
|
|
||||||
#include <avr/pgmspace.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#endif
|
|
||||||
#include <stddef.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include "backlight.h"
|
|
||||||
|
|
||||||
#ifndef PS2AVRGB_BACKLIGHT_H
|
|
||||||
#define PS2AVRGB_BACKLIGHT_H
|
|
||||||
|
|
||||||
uint8_t get_pwm_for_brightness(uint8_t level);
|
|
||||||
void set_backlight_pwm(uint8_t level);
|
|
||||||
void backlight_on(void);
|
|
||||||
void backlight_off(void);
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
@ -1,30 +1,23 @@
|
||||||
/*
|
/* Copyright 2019 MechMerlin
|
||||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
*
|
||||||
Copyright 2018 Sebastian Kaim <sebb@sebb767.de>
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
This program is free software: you can redistribute it and/or modify
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
it under the terms of the GNU General Public License as published by
|
* (at your option) any later version.
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
*
|
||||||
(at your option) any later version.
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
This program is distributed in the hope that it will be useful,
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
* GNU General Public License for more details.
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
*
|
||||||
GNU General Public License for more details.
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
You should have received a copy of the GNU General Public License
|
*/
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include "bface.h"
|
|
||||||
#include "rgblight.h"
|
#include "rgblight.h"
|
||||||
|
#include "i2c_master.h"
|
||||||
#include <avr/pgmspace.h>
|
|
||||||
|
|
||||||
#include "action_layer.h"
|
|
||||||
#include "i2c.h"
|
|
||||||
#include "quantum.h"
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
extern rgblight_config_t rgblight_config;
|
extern rgblight_config_t rgblight_config;
|
||||||
|
|
||||||
void rgblight_set(void) {
|
void rgblight_set(void) {
|
||||||
|
|
@ -37,10 +30,59 @@ void rgblight_set(void) {
|
||||||
}
|
}
|
||||||
|
|
||||||
i2c_init();
|
i2c_init();
|
||||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
|
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
if (rgblight_config.enable) {
|
||||||
|
i2c_init();
|
||||||
|
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
// call user level keymaps, if any
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
rgblight_task();
|
||||||
|
#endif
|
||||||
|
matrix_scan_user();
|
||||||
|
/* Nothing else for now. */
|
||||||
}
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
rgblight_task();
|
}
|
||||||
|
|
||||||
|
void backlight_init_ports(void) {
|
||||||
|
// initialize pins D0, D1, D4 and D6 as output
|
||||||
|
setPinOutput(D0);
|
||||||
|
setPinOutput(D1);
|
||||||
|
setPinOutput(D4);
|
||||||
|
setPinOutput(D6);
|
||||||
|
|
||||||
|
// turn backlight LEDs on
|
||||||
|
writePinHigh(D0);
|
||||||
|
writePinHigh(D1);
|
||||||
|
writePinHigh(D4);
|
||||||
|
writePinHigh(D6);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_set(uint8_t level) {
|
||||||
|
if (level == 0) {
|
||||||
|
// turn backlight LEDs off
|
||||||
|
writePinLow(D0);
|
||||||
|
writePinLow(D1);
|
||||||
|
writePinLow(D4);
|
||||||
|
writePinLow(D6);
|
||||||
|
} else {
|
||||||
|
// turn backlight LEDs on
|
||||||
|
writePinHigh(D0);
|
||||||
|
writePinHigh(D1);
|
||||||
|
writePinHigh(D4);
|
||||||
|
writePinHigh(D6);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,104 +0,0 @@
|
||||||
/*
|
|
||||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <util/twi.h>
|
|
||||||
|
|
||||||
#include "i2c.h"
|
|
||||||
|
|
||||||
void i2c_set_bitrate(uint16_t bitrate_khz) {
|
|
||||||
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
|
|
||||||
if (bitrate_div >= 16) {
|
|
||||||
bitrate_div = (bitrate_div - 16) / 2;
|
|
||||||
}
|
|
||||||
TWBR = bitrate_div;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_init(void) {
|
|
||||||
// set pull-up resistors on I2C bus pins
|
|
||||||
PORTC |= 0b11;
|
|
||||||
|
|
||||||
i2c_set_bitrate(400);
|
|
||||||
|
|
||||||
// enable TWI (two-wire interface)
|
|
||||||
TWCR |= (1 << TWEN);
|
|
||||||
|
|
||||||
// enable TWI interrupt and slave address ACK
|
|
||||||
TWCR |= (1 << TWIE);
|
|
||||||
TWCR |= (1 << TWEA);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t i2c_start(uint8_t address) {
|
|
||||||
// reset TWI control register
|
|
||||||
TWCR = 0;
|
|
||||||
|
|
||||||
// begin transmission and wait for it to end
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
|
||||||
while (!(TWCR & (1<<TWINT)));
|
|
||||||
|
|
||||||
// check if the start condition was successfully transmitted
|
|
||||||
if ((TWSR & 0xF8) != TW_START) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
// transmit address and wait
|
|
||||||
TWDR = address;
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
while (!(TWCR & (1<<TWINT)));
|
|
||||||
|
|
||||||
// check if the device has acknowledged the READ / WRITE mode
|
|
||||||
uint8_t twst = TW_STATUS & 0xF8;
|
|
||||||
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_stop(void) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t i2c_write(uint8_t data) {
|
|
||||||
TWDR = data;
|
|
||||||
|
|
||||||
// transmit data and wait
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
while (!(TWCR & (1<<TWINT)));
|
|
||||||
|
|
||||||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
|
|
||||||
if (i2c_start(address)) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (uint16_t i = 0; i < length; i++) {
|
|
||||||
if (i2c_write(data[i])) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
i2c_stop();
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
@ -1,25 +0,0 @@
|
||||||
/*
|
|
||||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __I2C_H__
|
|
||||||
#define __I2C_H__
|
|
||||||
|
|
||||||
void i2c_init(void);
|
|
||||||
void i2c_set_bitrate(uint16_t bitrate_khz);
|
|
||||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
@ -40,7 +40,7 @@ OPT_DEFS = -DDEBUG_LEVEL=0
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=2048
|
OPT_DEFS += -DBOOTLOADER_SIZE=2048
|
||||||
|
|
||||||
# custom matrix setup
|
# custom matrix setup
|
||||||
SRC = i2c.c backlight_ps2avrGB.c
|
SRC = i2c_master.c
|
||||||
|
|
||||||
# programming options
|
# programming options
|
||||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue