mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

[Keyboard] 1up60hte cleanup + bugfix (#6763)

Browse source 
* move caps lock led to keyboard level so even QMK Configurator users have access to it

* set bootloader correctly to atmel-dfu

* clean up extra carriage return
This commit is contained in:
MechMerlin 2019-09-18 18:42:53 -07:00 committed by Drashna Jaelre
parent 7142b60405
commit 7a5a2591eb
5 changed files with 18 additions and 80 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
keyboards/1upkeyboards/1up60hte/1up60hte.c
View file

@ -16,3 +16,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "1up60hte.h"
void keyboard_pre_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
setPinOutput(B6);
keyboard_pre_init_user();
}
void led_set_kb(uint8_t usb_led) {
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
writePinLow(B6);
} else {
writePinHigh(B6);
}
led_set_user(usb_led);
}

19
keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
View file

@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
void matrix_init_user(void) {
setPinOutput(B6);
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
writePinLow(B6);
} else {
writePinHigh(B6);
}
}

19
keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
View file

@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
void matrix_init_user(void) {
setPinOutput(B6);
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
writePinLow(B6);
} else {
writePinHigh(B6);
}
}

1
keyboards/1upkeyboards/1up60hte/readme.md
View file

@ -8,7 +8,6 @@ A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a
Keyboard Maintainer: [Bubnick](https://github.com/bubnick)
Hardware Supported: 1up60hte 60% PCB
Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
Make example for this keyboard (after setting up your build environment):

43
keyboards/1upkeyboards/1up60hte/rules.mk
View file

@ -1,50 +1,12 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
OPT_DEFS += -DBOOTLOADER_SIZE=4096
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
@ -54,6 +16,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes
EXTRAFLAGS += -flto
LAYOUTS = 60_hhkb