Keymap: add ginjake keymap for the zinc keyboard (#4741)

* サンシャインぴっかぴかモード実装

* サンシャインぴっかぴかモード
This commit is contained in:
ginjake 2018-12-30 01:19:34 +09:00 committed by Drashna Jaelre
parent bb1b441325
commit cc7bf108a9
4 changed files with 627 additions and 0 deletions

View file

@ -0,0 +1,38 @@
/*
This is the c configuration file for the keymap
Copyright 2018 monksoffunk
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// if you need more program area, try uncomment follow line
#include "serial_config_simpleapi.h"
// place overrides here
// Selection of RGBLIGHT MODE to use.
#if defined(LED_ANIMATIONS)
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#define RGBLIGHT_EFFECT_RGB_TEST
//#define RGBLIGHT_EFFECT_ALTERNATING
#endif

View file

@ -0,0 +1,368 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_QWERTY = 0,
_COLEMAK,
_DVORAK,
_LOWER,
_RAISE,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
BACKLIT,
KANA,
EISU,
RGBRST,
AQOURS, //サンシャインぴっかぴかモード
};
#ifdef RGBLIGHT_ENABLE
//9色に変化するLEDのHSV各パラメータ
int aqours_h[] = { 26, 340, 150, 0, 199, 220, 53, 265, 322};
int aqours_s[] = {255, 165, 255, 255, 255, 350, 255, 255, 255};
int aqours_v[] = {255, 255, 255, 255, 255, 255, 255, 255, 255};
const int NEXT_COLOR_TIME = 2400; //次の色に切り替わるまでの時間
const int NEXT_CHANGE_TARGET_TIME = 100; //次のキーに色が伝播するまでの時間
bool aqours_mode = false;
int aqours_next_color_timer_count = 0;
int aqours_num = 0;
int target_col = 0;
//keyのmatrixの位置とLEDの番号を紐づける
int combined_key_to_led[] =
{
0,1,2,3,4,5,
11,10,9,8,7,6,
12,13,14,15,16,17,
23,22,21,20,19,18
};
#endif
enum macro_keycodes {
KC_SAMPLEMACRO,
};
//Macros
#define M_SAMPLE M(KC_SAMPLEMACRO)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \
/* Qwerty
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc |ADJUST| Win | Alt |LOWER |Space | | Space| RAISE| Left | Down | Up | Right|
* `-----------------------------------------' `-----------------------------------------'
*/
[_QWERTY] = LAYOUT_ortho_4x12(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
KC_ESC, ADJUST, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right|
* `-----------------------------------------' `-----------------------------------------'
*/
[_COLEMAK] = LAYOUT_ortho_4x12( \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
KC_ESC, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | ' | , | . | P | Y | | F | G | C | R | L | Del |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | O | E | U | I | | D | H | T | N | S | / |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right|
* `-----------------------------------------' `-----------------------------------------'
*/
[_DVORAK] = LAYOUT_ortho_4x12( \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, \
KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
KC_ESC, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------. ,-----------------------------------------.
* | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | - | _ | + | { | } | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | Home | End | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------' `-----------------------------------------'
*/
[_LOWER] = LAYOUT_ortho_4x12( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
_______, _______, _______, _______, _______, _______, KC_MINS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------' `-----------------------------------------'
*/
[_RAISE] = LAYOUT_ortho_4x12( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------. ,-----------------------------------------.
* | | Reset|RGBRST|Aud on|Audoff| | | |Qwerty|Colemk|Dvorak| | Ins |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |AQOURS|RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | MODE | HUE- | SAT- | VAL- | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | EISU | EISU | EISU | | KANA | KANA | Home |PageDn|PageUp| End |
* `-----------------------------------------' `-----------------------------------------'
*/
[_ADJUST] = LAYOUT_ortho_4x12( \
_______, RESET, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, KC_INS, \
AQOURS, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, AG_NORM, AG_SWAP, KC_MINS, KC_EQL, KC_PSCR, KC_SLCK, KC_PAUS,\
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,\
_______, _______, _______, EISU, EISU, EISU, KANA, KANA, KC_HOME, KC_PGDN, KC_PGUP, KC_END\
)
};
// define variables for reactive RGB
bool TOG_STATUS = false;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
#ifdef RGBLIGHT_ENABLE
rgblight_mode_noeeprom(RGB_current_config.mode);
#endif
layer_on(layer3);
} else {
layer_off(layer3);
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
rgblight_mode_noeeprom(16);
#endif
}
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change
#endif
TOG_STATUS = false;
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
rgblight_mode_noeeprom(15);
#endif
}
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change
#endif
layer_off(_RAISE);
TOG_STATUS = false;
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode_noeeprom(RGB_current_config.mode);
rgblight_step();
RGB_current_config.mode = rgblight_config.mode;
}
#endif
return false;
break;
case EISU:
if (record->event.pressed) {
if(keymap_config.swap_lalt_lgui==false){
register_code(KC_LANG2);
}else{
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG2);
}
return false;
break;
case KANA:
if (record->event.pressed) {
if(keymap_config.swap_lalt_lgui==false){
register_code(KC_LANG1);
}else{
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG1);
}
return false;
break;
case AQOURS:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
aqours_mode = !aqours_mode;
}
#endif
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}
#ifdef RGBLIGHT_ENABLE
void aqours_led(void) {
aqours_next_color_timer_count++;
//一定間隔で色が変化
if (aqours_next_color_timer_count > NEXT_COLOR_TIME) {
aqours_num++;
aqours_next_color_timer_count = 0;
target_col = 0;
if (aqours_num == sizeof(aqours_h) / sizeof(int)) {
aqours_num = 0;
}
}
//キー毎に時間差で色が変化していく
if (aqours_next_color_timer_count % NEXT_CHANGE_TARGET_TIME == 0) {
if (target_col < MATRIX_COLS) {
sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[target_col]);
sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[11 - target_col]);
sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[12 + target_col]);
sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[23 - target_col]);
target_col++;
rgblight_set();
}
}
}
#endif
void matrix_scan_user(void) {
#ifdef RGBLIGHT_ENABLE
if (aqours_mode) {
aqours_led();
}
#endif
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_init();
RGB_current_config = rgblight_config;
#endif
}

View file

@ -0,0 +1,123 @@
# The Default Zinc Layout
## 配列
### Qwerty配列
```
,-----------------------------------------. ,-----------------------------------------.
| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Esc | Fn | Alt | Win |Lower |Space | | Space| Raise| Left | Down | Up | Right|
`------------------------------------------ ------------------------------------------'
```
### Colemak
```
,-----------------------------------------. ,-----------------------------------------.
| Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Ctrl | A | R | S | T | D | | H | N | E | I | O | ' |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Shift| Z | X | C | V | B | | K | M | , | . | / |Enter |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right|
`------------------------------------------ ------------------------------------------'
```
### Dvorak
```
,-----------------------------------------. ,-----------------------------------------.
| Tab | ' | , | . | P | Y | | F | G | C | R | L | Del |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Ctrl | A | O | E | U | I | | D | H | T | N | S | / |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right|
`-----------------------------------------' `-----------------------------------------'
```
## コンパイルの仕方
コンパイルは、qmk_firmware のトップディレクトリで行います。
```
$ cd qmk_firmware
```
qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
```
$ make zinc:default
```
キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。
```
$ make zinc:default:avrdude
```
コンパイル結果と中間生成物を消去したい場合は以下のようにします。
```
$ make zinc:default:clean
```
## カスタマイズ
コマンドラインからオプションを指定してビルドすることが出来ます。
```
# Zinc keyboard 'default' keymap: convenient command line option
make ZINC=<options> zinc:defualt
# option= back | under | na | ios
# ex.
# make ZINC=under zinc:defualt
# make ZINC=under,ios zinc:defualt
# make ZINC=back zinc:default
# make ZINC=back,na zinc:default
# make ZINC=back,ios zinc:default
```
あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/default/rules.mk` の以下の部分を直接編集して機能を有効化してください。
```
# Zinc keyboard customize
LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight)
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
```
## RGB backlight を有効にする
rules.mk の下記の部分を編集して no を yes に変更してください。
```
LED_BACK_ENABLE = yes # LED backlight (Enable SK6812mini backlight)
```
## RGB Underglow を有効にする
rules.mk の下記の部分を編集して no を yes に変更してください。
```
LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.)
```
## iPad/iPhoneサポートを有効にする。
rules.mk の下記の部分を編集して no を yes に変更してください。
RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。
```
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
```

View file

@ -0,0 +1,98 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
define ZINC_CUSTOMISE_MSG
$(info Zinc customize)
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
endef
# Zinc keyboard customize
LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight)
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
Link_Time_Optimization = no # if firmware size over limit, try this option
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
#### Do not enable these with audio at the same time.
### Zinc keyboard 'default' keymap: convenient command line option
## make ZINC=<options> zinc:defualt
## option= back | under | na | ios
## ex.
## make ZINC=under zinc:defualt
## make ZINC=under,ios zinc:defualt
## make ZINC=back zinc:default
## make ZINC=back,na zinc:default
## make ZINC=back,ios zinc:default
ifneq ($(strip $(ZINC)),)
ifeq ($(findstring back,$(ZINC)), back)
LED_BACK_ENABLE = yes
else ifeq ($(findstring under,$(ZINC)), under)
LED_UNDERGLOW_ENABLE = yes
endif
ifeq ($(findstring na,$(ZINC)), na)
LED_ANIMATIONS = no
endif
ifeq ($(findstring ios,$(ZINC)), ios)
IOS_DEVICE_ENABLE = yes
endif
$(eval $(call ZINC_CUSTOMISE_MSG))
$(info )
endif
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BACK
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
$(eval $(call ZINC_CUSTOMISE_MSG))
$(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
else
RGBLIGHT_ENABLE = no
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
ifeq ($(strip $(LED_ANIMATIONS)), yes)
# OPT_DEFS += -DRGBLIGHT_ANIMATIONS
OPT_DEFS += -DLED_ANIMATIONS
endif
ifeq ($(strip $(Link_Time_Optimization)),yes)
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
endif
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# Uncomment these for debugging
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
# $(info -- OPT_DEFS=$(OPT_DEFS))
# $(info )