Add STM32Duino to bootloader selection (#10558)

This commit is contained in:
Ryan 2020-10-13 03:19:50 +11:00 committed by GitHub
parent adc06c5b3b
commit d46b8ef67c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
20 changed files with 36 additions and 147 deletions

View file

@ -28,6 +28,7 @@
# bootloadHID HIDBootFlash compatible (ATmega32A)
# USBasp USBaspLoader (ATmega328P)
# kiibohd Input:Club Kiibohd bootloader (only used on their boards)
# stm32duino STM32Duino (STM32F103x8)
#
# BOOTLOADER_SIZE can still be defined manually, but it's recommended
# you add any possible configuration to this list
@ -106,3 +107,14 @@ ifeq ($(strip $(BOOTLOADER)), kiibohd)
DFU_ARGS = -d 1C11:B007
DFU_SUFFIX_ARGS = -v 1C11 -p B007
endif
ifeq ($(strip $(BOOTLOADER)), stm32duino)
OPT_DEFS += -DBOOTLOADER_STM32DUINO
MCU_LDSCRIPT ?= STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
# STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
STM32_BOOTLOADER_ADDRESS = 0x80000000
DFU_ARGS = -d 1EAF:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1EAF -p 0003
endif

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# project specific files
VPATH += keyboards/cannonkeys/bluepill

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# project specific files
VPATH += keyboards/cannonkeys/bluepill

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# project specific files
VPATH += keyboards/cannonkeys/bluepill

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# project specific files
VPATH += keyboards/cannonkeys/bluepill

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# project specific files
VPATH += keyboards/cannonkeys/bluepill

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
SRC = matrix.c

View file

@ -1,10 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,13 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,12 +1,7 @@
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
STM32_BOOTLOADER_ADDRESS = 0x80000000
DFU_ARGS = -d 1EAF:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1EAF -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,12 +1,7 @@
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
STM32_BOOTLOADER_ADDRESS = 0x80000000
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,11 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103 does not have a USB bootloader in ROM -- the WM1
// has a usermode USB mass storage device bootloader at the normal
// boot address -- `0x08000000`.
#define STM32_BOOTLOADER_ADDRESS 0x80000000

View file

@ -1,11 +1,13 @@
# MCU name
MCU = STM32F103
# Bootloader selection
BOOTLOADER = stm32duino
# GENERIC STM32F103C8T6 board - mass storage bootloader
MCU_LDSCRIPT = wm1_f103
BOARD = STM32_F103_STM32DUINO
PROGRAM_CMD=echo 'CLI flashing not supported' >&2
PROGRAM_CMD = echo 'CLI flashing not supported' >&2
# Build Options
# change yes to no to disable

View file

@ -1,13 +1,8 @@
# MCU name
MCU = STM32F103
# GENERIC STM32F103C8T6 board - stm32duino bootloader
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
STM32_BOOTLOADER_ADDRESS = 0x80000000
DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
# Bootloader selection
BOOTLOADER = stm32duino
# Build Options
# change yes to no to disable