Fix doc of Boot Magic and add another project info

This commit is contained in:
tmk 2013-04-22 13:08:46 +09:00
parent f4760c822a
commit dad9dab995
2 changed files with 9 additions and 6 deletions

View file

@ -123,9 +123,9 @@ Following commands can be also executed with `Magic` + key. In console mode `Mag
Boot Magic are executed during boot up time. Press Magic key below then pulgin keyboard cable.
Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
#### EEPROM
- Skip reading EEPROM(`ESC`)
- Clear configuration stored in EEPROM(`Backspace`)
#### General
- Skip reading EEPROM to start with default configuration(`ESC`)
- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
#### Bootloader
- Kick up Bootloader(`B`)
@ -147,9 +147,9 @@ Note that you must use keys of **Layer 0** as Magic keys. These settings are sto
#### Default Layer
- Set Default Layer to 0(`0`)
- Set Default Layer to 0(`1`)
- Set Default Layer to 0(`2`)
- Set Default Layer to 0(`3`)
- Set Default Layer to 1(`1`)
- Set Default Layer to 2(`2`)
- Set Default Layer to 3(`3`)
**TBD**

View file

@ -56,3 +56,6 @@ Great resourse of vintage keyboard protocol information and code
A lots of vintage keyboard protocol supports
- <http://gitorious.org/kiibohd-controller>
## Kinesis ergonomic keyboard firmware replacement[V-USB][LUFA][Ergo]
- <https://github.com/chrisandreae/kinesis-firmware>