mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge branch 'user_led_configuration' into infinity60

Browse source 
Conflicts:
	keyboards/infinity60/keymaps/jpetermans/keymap.c
This commit is contained in:
jpetermans 2017-05-24 12:07:18 -07:00
commit e6c9b07e1c
7 changed files with 600 additions and 621 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

385
keyboards/infinity60/MEMO.txt
View file

@ -1,385 +0,0 @@
flabbergast's TMK/ChibiOS port
==============================
2015/10/16
Build
-----
$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
$ cd tmk_keyboard
$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
or
$ cd tmk_keyboard/tmk_core/tool/chibios
$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
$ cd tmk_keyboard/keyboard/infinity_chibios
$ make
Chibios Configuration
---------------------
halconf.h: for HAL configuration
placed in project directory
read in chibios/os/hal/hal.mk
included in chibios/os/hal/include/hal.h
mcuconf.h: for MCU configuration
placed in project directory
included in halconf.h
Chibios Term
------------
PAL = Port Abstraction Layer
palWritePad
palReadPad
palSetPad
chibios/os/hal/include/pal.h
LLD = Low Level Driver
Makefile
--------
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = KINETIS
MCU_SERIES = KL2x
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
MCU_LDSCRIPT = MKL26Z64
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = kl2x
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = PJRC_TEENSY_LC
MCU = cortex-m0
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 6
halconf.h
---------
mcuconf.h
---------
chconf.h
--------
ld script
---------
--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900
+++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900
@@ -27,7 +27,8 @@
{
flash0 : org = 0x00000000, len = 0xc0
flashcfg : org = 0x00000400, len = 0x10
- flash : org = 0x00000410, len = 64k - 0x410
+ flash : org = 0x00000410, len = 62k - 0x410
+ eeprom_emu : org = 0x0000F800, len = 2k
ram : org = 0x1FFFF800, len = 8k
}
@@ -35,6 +36,10 @@
__ram_size__ = LENGTH(ram);
__ram_end__ = __ram_start__ + __ram_size__;
+__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
+__eeprom_workarea_size__ = LENGTH(eeprom_emu);
+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
SECTIONS
{
. = 0;
Configuration/Startup for Infinity 60%
--------------------------------------
Configuration:
Clock:
Inifinity
FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
Clock dividor:
SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
Internal reference clock:
MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
FLL multipilication:
MCG_C4[DMX32] = 1
MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz
chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
k20x_clock_init(): called in __early_init() defined in board.c
disable watchdog and configure clock
configurable macros:
KINETIS_NO_INIT: whether init or not
KINETIS_MCG_MODE: clock mode
KINETIS_MCG_MODE_FEI
KINETIS_MCG_MODE_PEE
hal/ports/KINETIS/K20x/hal_lld.h
chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
PALConfig pal_default_config
boardInit()
__early_init()
macro definitions for board infos, freq and mcu type
chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
USB
Startup
-------
common/ports/ARMCMx/GCC/crt0_v[67]m.s
Reset_Handler: startup code
common/ports/ARMCMx/GCC/crt1.c
__core_init(): weak
__early_init(): weak
__late_init(): weak
__default_exit(): weak
called from Reset_Handler of crt0
common/ports/ARMCMx/GCC/vector.c
common/ports/ARMCMx/GCC/ld/*.ld
chibios/os/common/ports/ARMCMx/compilers/GCC/
├── crt0_v6m.s
├── crt0_v7m.s
├── crt1.c
├── ld
│   ├── MK20DX128BLDR3.ld
│   ├── MK20DX128BLDR4.ld
│   ├── MK20DX128.ld
│   ├── MK20DX256.ld
│   ├── MKL25Z128.ld
│   ├── MKL26Z128.ld
│   ├── MKL26Z64.ld
│   └── STM32L476xG.ld
├── mk
│   ├── startup_k20x5.mk
│   ├── startup_k20x7.mk
│   ├── startup_k20x.mk
│   ├── startup_kl2x.mk
│   └── startup_stm32l4xx.mk
├── rules.ld
├── rules.mk
└── vectors.c
chibios/os/hal/
├── boards
│   ├── FREESCALE_FREEDOM_K20D50M
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── MCHCK_K20
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── PJRC_TEENSY_3
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── PJRC_TEENSY_3_1
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── PJRC_TEENSY_LC
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── readme.txt
│   ├── simulator
│   │   ├── board.c
│   │   ├── board.h
│   │   └── board.mk
│   ├── ST_NUCLEO_F030R8
│   │   ├── board.c
│   │   ├── board.h
│   │   ├── board.mk
│   │   └── cfg
│   │   └── board.chcfg
├── hal.mk
├── include
│   ├── adc.h
│   ├── can.h
│   ├── dac.h
│   ├── ext.h
│   ├── gpt.h
│   ├── hal_channels.h
│   ├── hal_files.h
│   ├── hal.h
│   ├── hal_ioblock.h
│   ├── hal_mmcsd.h
│   ├── hal_queues.h
│   ├── hal_streams.h
│   ├── i2c.h
│   ├── i2s.h
│   ├── icu.h
│   ├── mac.h
│   ├── mii.h
│   ├── mmc_spi.h
│   ├── pal.h
│   ├── pwm.h
│   ├── rtc.h
│   ├── sdc.h
│   ├── serial.h
│   ├── serial_usb.h
│   ├── spi.h
│   ├── st.h
│   ├── uart.h
│   └── usb.h
├── lib
│   └── streams
│   ├── chprintf.c
│   ├── chprintf.h
│   ├── memstreams.c
│   ├── memstreams.h
│   ├── nullstreams.c
│   └── nullstreams.h
├── osal
│   ├── nil
│   │   ├── osal.c
│   │   ├── osal.h
│   │   └── osal.mk
│   ├── os-less
│   │   └── ARMCMx
│   │   ├── osal.c
│   │   ├── osal.h
│   │   └── osal.mk
│   └── rt
│   ├── osal.c
│   ├── osal.h
│   └── osal.mk
├── ports
│   ├── AVR
│   ├── common
│   │   └── ARMCMx
│   │   ├── mpu.h
│   │   ├── nvic.c
│   │   └── nvic.h
│   ├── KINETIS
│   │   ├── K20x
│   │   │   ├── hal_lld.c
│   │   │   ├── hal_lld.h
│   │   │   ├── kinetis_registry.h
│   │   │   ├── platform.dox
│   │   │   ├── platform.mk
│   │   │   ├── pwm_lld.c
│   │   │   ├── pwm_lld.h
│   │   │   ├── spi_lld.c
│   │   │   └── spi_lld.h
│   │   ├── KL2x
│   │   │   ├── hal_lld.c
│   │   │   ├── hal_lld.h
│   │   │   ├── kinetis_registry.h
│   │   │   ├── platform.mk
│   │   │   ├── pwm_lld.c
│   │   │   └── pwm_lld.h
│   │   ├── LLD
│   │   │   ├── adc_lld.c
│   │   │   ├── adc_lld.h
│   │   │   ├── ext_lld.c
│   │   │   ├── ext_lld.h
│   │   │   ├── gpt_lld.c
│   │   │   ├── gpt_lld.h
│   │   │   ├── i2c_lld.c
│   │   │   ├── i2c_lld.h
│   │   │   ├── pal_lld.c
│   │   │   ├── pal_lld.h
│   │   │   ├── serial_lld.c
│   │   │   ├── serial_lld.h
│   │   │   ├── st_lld.c
│   │   │   ├── st_lld.h
│   │   │   ├── usb_lld.c
│   │   │   └── usb_lld.h
│   │   └── README.md
│   ├── LPC
│   ├── simulator
│   └── STM32
├── src
│   ├── adc.c
│   ├── can.c
│   ├── dac.c
│   ├── ext.c
│   ├── gpt.c
│   ├── hal.c
│   ├── hal_mmcsd.c
│   ├── hal_queues.c
│   ├── i2c.c
│   ├── i2s.c
│   ├── icu.c
│   ├── mac.c
│   ├── mmc_spi.c
│   ├── pal.c
│   ├── pwm.c
│   ├── rtc.c
│   ├── sdc.c
│   ├── serial.c
│   ├── serial_usb.c
│   ├── spi.c
│   ├── st.c
│   ├── uart.c
│   └── usb.c
└── templates
├── adc_lld.c
├── adc_lld.h
├── can_lld.c
├── can_lld.h
├── dac_lld.c
├── dac_lld.h
├── ext_lld.c
├── ext_lld.h
├── gpt_lld.c
├── gpt_lld.h
├── halconf.h
├── hal_lld.c
├── hal_lld.h
├── i2c_lld.c
├── i2c_lld.h
├── i2s_lld.c
├── i2s_lld.h
├── icu_lld.c
├── icu_lld.h
├── mac_lld.c
├── mac_lld.h
├── mcuconf.h
├── osal
│   ├── osal.c
│   ├── osal.h
│   └── osal.mk
├── pal_lld.c
├── pal_lld.h
├── platform.mk
├── pwm_lld.c
├── pwm_lld.h
├── rtc_lld.c
├── rtc_lld.h
├── sdc_lld.c
├── sdc_lld.h
├── serial_lld.c
├── serial_lld.h
├── spi_lld.c
├── spi_lld.h
├── st_lld.c
├── st_lld.h
├── uart_lld.c
├── uart_lld.h
├── usb_lld.c
└── usb_lld.h

2
keyboards/infinity60/keymaps/jpetermans/Makefile
View file

@ -1,5 +1,3 @@
#BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
#BOOTMAGIC_ENABLE = yes
ifndef QUANTUM_DIR
include ../../../../Makefile

247
keyboards/infinity60/keymaps/jpetermans/keymap.c
View file

@ -11,6 +11,34 @@
#define _MEDIA 3
#define _TILDE 4
//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles
#define max_pages 6
enum ic60_keycodes {
NUMPAD,
FNAV,
MEDIA,
TILDE,
CTLALTDEL,
BACKLIGHT,
BRIGHT,
DIM,
ALL,
GAME,
MODE_SINGLE,
MODE_PAGE,
MODE_FLASH
};
uint8_t current_layer_global = 0;
uint8_t led_mode_global = MODE_SINGLE;
uint8_t backlight_status_global = 1; //init on/off state of backlight
uint32_t led_layer_state = 0;
/* ==================================
* KEYMAPS
* ==================================*/
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,-----------------------------------------------------------.
@ -30,17 +58,8 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_NO,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
F(1), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
),
/* F-, arrow, and media keys */
[_FNAV] = KEYMAP( \
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\
KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \
_______,M(0),KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \
_______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \
_______,_______,_______, _______, F(0),KC_NLCK,_______,_______ \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO, \
KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
),
/* numpad */
@ -49,15 +68,24 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \
_______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \
_______,_______,_______, MO(_BASE), _______,_______,_______,_______ \
_______,_______,_______, TO(_BASE), _______,_______,_______,_______ \
),
/* F-, arrow, and media keys */
[_FNAV] = KEYMAP( \
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\
KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \
_______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \
_______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \
_______,_______,_______, _______, F(CTLALTDEL),KC_NLCK,_______,_______ \
),
/* media */
[_MEDIA] = KEYMAP( \
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, KC_UP, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,_______,_______, KC_LEFT, KC_DOWN, KC_RGHT,_______, _______,_______, \
_______,_______,F(2),F(3),_______,_______,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
_______,F(MODE_SINGLE),F(MODE_PAGE),F(MODE_FLASH),_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,F(GAME),_______, _______, _______, _______,_______, _______,_______, \
_______,_______,F(ALL) ,F(BRIGHT),F(DIM),F(BACKLIGHT),_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
_______,_______,_______, KC_MPLY, _______,_______, _______,_______ \
),
/* ~ */
@ -85,58 +113,193 @@ enum function_id {
enum macro_id {
ACTION_LEDS_ALL,
ACTION_LEDS_GAME
ACTION_LEDS_GAME,
ACTION_LEDS_BACKLIGHT,
ACTION_LEDS_BRIGHT,
ACTION_LEDS_DIM,
ACTION_LEDS_SINGLE,
ACTION_LEDS_PAGE,
ACTION_LEDS_FLASH
};
/* ==================================
* LED MAPPING
* ==================================*/
/*
Infinity60 LED MAP
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
*Unused in Alphabet Layout
*/
//======== full page arrays =========
//any change in array size needs to be mirrored in matrix_init_user
uint8_t led_numpad[16] = {
18,21,22,23,
37,38,41,42,
55,56,57,58,
72,73,74,75
};
//LED Page 2 - _Nav
uint8_t led_nav[12] = {
38,
47,48, 55,56,57,
64,65,66
};
//LED Page 3 - _Media
uint8_t led_media[15] = {
12,13,14, 23,24,25,
65,66,67,68, 73,74,75,
83, 86
};
//LED Page 4 - _Game "WASD"
uint8_t led_game[5] = {
11,
32,
47,48,51
};
//======== qmk functions =========
const uint16_t fn_actions[] = {
[0] = ACTION_KEY(LALT(LCTL(KC_DEL))),
[1] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
[2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
[3] = ACTION_FUNCTION(ACTION_LEDS_GAME)
[CTLALTDEL] = ACTION_KEY(LALT(LCTL(KC_DEL))),
[TILDE] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
[ALL] = ACTION_FUNCTION(ACTION_LEDS_ALL),
[GAME] = ACTION_FUNCTION(ACTION_LEDS_GAME),
[BACKLIGHT] = ACTION_FUNCTION(ACTION_LEDS_BACKLIGHT),
[BRIGHT] = ACTION_FUNCTION(ACTION_LEDS_BRIGHT),
[DIM] = ACTION_FUNCTION(ACTION_LEDS_DIM),
[MODE_SINGLE] = ACTION_FUNCTION(ACTION_LEDS_SINGLE),
[MODE_PAGE] = ACTION_FUNCTION(ACTION_LEDS_PAGE),
[MODE_FLASH] = ACTION_FUNCTION(ACTION_LEDS_FLASH),
};
/* custom action function */
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
(void)opt;
msg_t msg;
switch(id) {
case ACTION_LEDS_ALL:
if(record->event.pressed) {
// signal the LED controller thread
chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_GAME:
if(record->event.pressed) {
// signal the LED controller thread
chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
led_mode_global = led_mode_global == ALL ? MODE_SINGLE : ALL;
msg=TOGGLE_ALL;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_BACKLIGHT:
if(record->event.pressed) {
backlight_status_global ^= 1;
msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_GAME:
if(record->event.pressed) {
led_mode_global = led_mode_global == GAME ? MODE_SINGLE : GAME;
msg=(4 << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_BRIGHT:
if(record->event.pressed) {
msg=(1 << 8) | STEP_BRIGHTNESS;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_DIM:
if(record->event.pressed) {
msg=(0 << 8) | STEP_BRIGHTNESS;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
//set led_mode for matrix_scan to toggle leds
case ACTION_LEDS_SINGLE:
led_mode_global = MODE_SINGLE;
break;
case ACTION_LEDS_PAGE:
led_mode_global = MODE_PAGE;
break;
case ACTION_LEDS_FLASH:
led_mode_global = MODE_FLASH;
break;
}
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case 0:
if (record->event.pressed) {
}
break;
case 1:
if (record->event.pressed) {
}
break;
}
return MACRO_NONE;
};
bool process_record_user (uint16_t keycode, keyrecord_t *record) {
return true;
}
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
xprintf("init start");
led_controller_init();
// Write predefined led pages.
write_led_page(_NUMPAD, led_numpad, 16);
chThdSleepMilliseconds(10);
write_led_page(_FNAV, led_nav, 12);
chThdSleepMilliseconds(10);
write_led_page(_MEDIA, led_media, 15);
chThdSleepMilliseconds(10);
write_led_page(4, led_game, 5);
chThdSleepMilliseconds(1000);
};
// Runs constantly in the background, in a loop.
// Loops constantly in the background.
void matrix_scan_user(void) {
uint8_t page;
uint8_t led_pin_byte;
msg_t msg;
};
if (backlight_status_global == 0) {//backlight is off, skip the rest
return;
}
if (led_layer_state != layer_state && led_mode_global != GAME && led_mode_global != ALL) {
//check mode
//Turn on layer indicator or page depending on mode
switch(led_mode_global) {
case MODE_FLASH: //flash preset page leds then single indicator
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
msg=(page << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
chThdSleepMilliseconds(500);
//flow to display single layer leds
case MODE_SINGLE: //light layer indicators for all active layers
led_pin_byte = layer_state & 0xFF;
msg=(7 << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
break;
case MODE_PAGE: //display pre-defined led page
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
msg=(page << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
break;
}
led_layer_state = layer_state;
}
}

87
keyboards/infinity60/keymaps/jpetermans/readme.md Normal file
View file

@ -0,0 +1,87 @@
Backlight for Infinity60
========================
## Led Controller Specs
The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A.
Infinity60 LED Map:
digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
```c
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
```
*Unused in Alphabet Layout
The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
- **bytes 0 - 17** - LED control (on/off).
* 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
* Each byte controls the 8 leds on that pin with bits (8 to 1).
- **bytes 8 - 35** - Blink control.
* Same as LED control above, but sets blink on/off.
- **bytes 36 - 143** - PWM control.
* One byte per LED, sets PWM from 0 to 255.
* Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices.
## Led Controller Code
In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox).
One function is available to directly set leds without the mailbox:
```
write_led_page(page#, array of leds by address, # of addresses in array)
```
This function saves a full page to the controller using a supplied array of led locations such as:
```c
uint8_t led_numpad[16] = {
18,21,22,23,
37,38,41,42,
55,56,57,58,
72,73,74,75
}
write_led_page(5, led_numpad, 16);
```
Remaining led control is done through the led mailbox using these message types:
- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display.
- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page.
- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page.
- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly).
- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock.
- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness.
## Sending messages in Keymap.c
Sending an action to the led mailbox is done using chMBPost:
```
chMBPost(&led_mailbox, message, timeout);
```
- &led_mailbox - pointer to led mailbox
- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process.
- timeout is TIME_IMMEDIATE
An example:
```c
//set the message to be sent. First byte (LSB) is the led address, and second is the message type
msg=(42 << 8) | ON_LED;
//send msg to the led mailbox
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```
Another:
```c
msg=(46 << 8) | BLINK_TOGGLE_LED;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```
Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like:
```c
msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```

33
keyboards/infinity60/led.c
View file

@ -26,25 +26,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* In particular, I2C functions (interrupt-driven) should NOT be called from here.
*/
void led_set(uint8_t usb_led) {
/*
// PTA5: LED (1:on/0:off)
GPIOA->PDDR |= (1<<1);
PORTA->PCR[5] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
GPIOA->PSOR |= (1<<5);
} else {
GPIOA->PCOR |= (1<<5);
}
*/
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// signal the LED control thread
msg_t msg;
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
chSysUnconditionalLock();
chMBPostI(&led_mailbox, LED_MSG_CAPS_ON);
msg=(1 << 8) | TOGGLE_NUM_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
} else {
// signal the LED control thread
chSysUnconditionalLock();
chMBPostI(&led_mailbox, LED_MSG_CAPS_OFF);
msg=(0 << 8) | TOGGLE_NUM_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
}
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
chSysUnconditionalLock();
msg=(1 << 8) | TOGGLE_CAPS_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
} else {
chSysUnconditionalLock();
msg=(0 << 8) | TOGGLE_CAPS_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
}
}

423
keyboards/infinity60/led_controller.c
View file

@ -17,13 +17,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/*
* LED controller code
* WF uses IS31FL3731C matrix LED driver from ISSI
* IS31FL3731C matrix LED driver from ISSI
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
*/
#include "ch.h"
#include "hal.h"
#include "print.h"
#include "led.h"
#include "host.h"
#include "led_controller.h"
@ -53,11 +55,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
*/
/* Which LED should be used for CAPS LOCK indicator
* The usual Caps Lock position is C4-6, so the address is
* 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
// Which LED should be used for CAPS LOCK indicator
#if !defined(CAPS_LOCK_LED_ADDRESS)
#define CAPS_LOCK_LED_ADDRESS 0x59
#define CAPS_LOCK_LED_ADDRESS 46
#endif
#if !defined(NUM_LOCK_LED_ADDRESS)
#define NUM_LOCK_LED_ADDRESS 85
#endif
/* Which LED should breathe during sleep */
@ -83,14 +87,22 @@ uint8_t rx[1] __attribute__((aligned(2)));
uint8_t full_page[0xB4+1] = {0};
// LED mask (which LEDs are present, selected by bits)
// See page comment above, control alternates CA matrix/CB matrix
// IC60 pcb uses only CA matrix.
// Each byte is a control pin for 8 leds 8-1
const uint8_t is31_ic60_leds_mask[0x12] = {
// Each byte is a control pin for 8 leds ordered 8-1
const uint8_t all_on_leds_mask[0x12] = {
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
};
// array to hold brightness pwm steps
const uint8_t pwm_levels[5] = {
0x00, 0x16, 0x4E, 0xA1, 0xFF
};
// array to write to pwm register
uint8_t pwm_register_array[9] = {0};
/* ============================
* communication functions
* ============================ */
@ -112,8 +124,8 @@ msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_read_register(uint8_t b, uint8_t reg, uint8_t *result) {
is31_select_page(b);
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
is31_select_page(page);
tx[0] = reg;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
@ -127,16 +139,9 @@ void is31_init(void) {
__builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes)
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
// disable hardware shutdown
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOB, 16);
chThdSleepMilliseconds(10);
// software shutdown
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
chThdSleepMilliseconds(10);
// zero function page, all registers
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
chThdSleepMilliseconds(10);
// software shutdown disable (i.e. turn stuff on)
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(10);
@ -144,7 +149,7 @@ void is31_init(void) {
uint8_t i;
for(i=0; i<8; i++) {
is31_write_data(i, full_page, 0xB4 + 1);
chThdSleepMilliseconds(1);
chThdSleepMilliseconds(5);
}
}
@ -159,134 +164,257 @@ static THD_FUNCTION(LEDthread, arg) {
(void)arg;
chRegSetThreadName("LEDthread");
uint8_t temp;
uint8_t save_page, save_breath1, save_breath2;
msg_t msg, retval;
uint8_t i;
uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
//persistent status variables
uint8_t pwm_step_status, page_status;
//mailbox variables
uint8_t temp, msg_type;
uint8_t msg_args[3];
msg_t msg;
// initialize persistent variables
pwm_step_status = 4; //full brightness
page_status = 0; //start frame 0 (all off/on)
while(true) {
// wait for a message (asynchronous)
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
// be processed right away)
// be processed right away
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
msg_type = msg & 0xFF; //first byte is action information
msg_args[0] = (msg >> 8) & 0xFF;
msg_args[1] = (msg >> 16) & 0XFF;
msg_args[2] = (msg >> 24) & 0xFF;
// process 'msg' here
switch(msg) {
case LED_MSG_CAPS_ON:
// turn caps on on pages 1 and 2
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0xFF);
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0xFF);
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0xFF);
switch (msg_type){
case SET_FULL_ROW:
//write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
//writes only to currently displayed page
write_led_byte(page_status, msg_args[1], msg_args[0]);
break;
case LED_MSG_CAPS_OFF:
// turn caps off on pages 1 and 2
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0);
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
case OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
break;
case LED_MSG_SLEEP_LED_ON:
// save current settings
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
retval = MSG_TIMEOUT;
temp = 6;
while(retval == MSG_TIMEOUT) {
// switch to the other page
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
temp = (temp == 6 ? 7 : 6);
// the times should be sufficiently long for IS31 to finish switching pages
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
}
// received a message (should be a wakeup), so restore previous state
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
// note: any other messages are queued
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
case ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
break;
case LED_MSG_SLEEP_LED_OFF:
// should not get here; wakeup should be received in the branch above
case TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
break;
case LED_MSG_ALL_TOGGLE:
// read current page into 'temp'
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
chThdSleepMilliseconds(1);
// switch to 'the other' page
if(temp==2) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
case BLINK_OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
break;
case BLINK_ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
break;
case BLINK_TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
break;
case TOGGLE_ALL:
//turn on/off all leds, msg_args = unused
is31_read_register(0, 0x00, &temp);
led_control_reg[0] = 0;
//if first leds are already on, toggle frame 0 off
if (temp==0 || page_status > 0) {
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 2);
__builtin_memset(led_control_reg+1, 0, 0x12);
}
is31_write_data(0, led_control_reg, 0x13);
if (page_status > 0) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
page_status=0;
//maintain lock leds
led_set(host_keyboard_leds());
}
break;
case LED_MSG_GAME_TOGGLE:
// read current page into 'temp'
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
chThdSleepMilliseconds(1);
// switch to 'the other' page
if(temp==1) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
case TOGGLE_BACKLIGHT:
//msg_args[0] = on/off
//populate 9 byte rows to be written to each pin, first byte is register (pin) address
if (msg_args[0] == 1) {
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
} else {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
__builtin_memset(pwm_register_array+1, 0, 8);
}
for(i=0; i<8; i++) {
//first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
pwm_register_array[0] = 0x24 + (i * 0x10);
is31_write_data(0,pwm_register_array,9);
}
break;
case DISPLAY_PAGE:
//msg_args[0] = page to toggle on
if (page_status != msg_args[0]) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
page_status = msg_args[0];
//maintain lock leds
led_set(host_keyboard_leds());
}
break;
case RESET_PAGE:
//led_args[0] = page to reset
led_control_reg[0] = 0;
__builtin_memset(led_control_reg+1, 0, 0x12);
is31_write_data(msg_args[0], led_control_reg, 0x13);
//repeat for blink register
led_control_reg[0] = 0x12;
is31_write_data(msg_args[0], led_control_reg, 0x13);
break;
case TOGGLE_NUM_LOCK:
//msg_args[0] = 0 or 1, off/on
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
break;
case TOGGLE_CAPS_LOCK:
//msg_args[0] = 0 or 1, off/on
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
break;
case STEP_BRIGHTNESS:
//led_args[0] = step up (1) or down (0)
switch (msg_args[0]) {
case 0:
if (pwm_step_status == 0) {
pwm_step_status = 4;
} else {
pwm_step_status--;
}
break;
case 1:
if (pwm_step_status == 4) {
pwm_step_status = 0;
} else {
pwm_step_status++;
}
break;
}
//populate 8 byte arrays to write on each pin
//first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
for(i=0; i<8; i++) {
pwm_register_array[0] = 0x24 + (i * 0x10);
is31_write_data(0,pwm_register_array,9);
}
break;
}
}
}
//These relate to the LED map above, row and column
//0x24 = first byte (CA1) of PWM page, 0x34 is 17th byte (CA2)
/* LED game mode */
const uint8_t led_game[72] = {
0x24,
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x34,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x44,
0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x54,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
0x64,
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x74,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x84,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x94,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
/* ==============================
* led processing functions
* ============================== */
/* ALL LEDs */
const uint8_t led_all[72] = {
0x24,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x34,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x44,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x54,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x64,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x74,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x84,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x94,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
};
void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
//returns 2 bytes: led control register address and byte to write
//action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
/* =============
* hook into TMK
* ============= */
uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
//check for valid led address
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
return;
}
blink_bit = action>>2;//check for blink bit
action &= ~(1<<2); //strip blink bit
//led_addr tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
column_bit = 1<<(led_addr % 10 - 1);
column_byte = temp;
switch(action) {
case 0:
column_byte &= ~column_bit;
break;
case 1:
column_byte |= column_bit;
break;
case 2:
column_byte ^= column_bit;
break;
}
//return word to be written in register
led_control_word[0] = control_reg_addr;
led_control_word[1] = column_byte;
is31_write_data (page, led_control_word, 0x02);
}
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
uint8_t led_control_word[2] = {0};//register address and on/off byte
led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
led_control_word[1] = led_byte;
is31_write_data(page, led_control_word, 0x02);
}
void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
uint8_t i;
uint8_t pin, col;
uint8_t led_control_register[0x13] = {0};
__builtin_memset(led_control_register,0,13);
for(i=0;i<led_count;i++){
//shift pin by 1 for led register 0x00 address
pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
col = user_led_array[i] % 10 - 1;
led_control_register[pin] |= 1<<(col);
}
is31_write_data(page, led_control_register, 0x13);
}
void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
uint8_t temp;
uint8_t led_control_word[2] = {0};
//blink if all leds are on
if (page == 0) {
is31_read_register(0, 0x00, &temp);
chThdSleepMilliseconds(10);
if (temp == 0xFF) {
led_action |= (1<<2); //set blink bit
}
}
set_led_bit(page,led_control_word,led_addr,led_action);
}
/* =====================
* hook into user keymap
* ===================== */
void led_controller_init(void) {
uint8_t i;
xprintf("led_controller_init");
/* initialise I2C */
/* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
@ -303,11 +431,17 @@ void led_controller_init(void) {
/* initialise IS31 chip */
is31_init();
/* enable LEDs on all pages */
full_page[0] = 0;
__builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
//set Display Option Register so all pwm intensity is controlled from page 0
//enable blink and set blink period to 0.27s x rate
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
/* set full pwm on page 1 */
pwm_register_array[0] = 0;
__builtin_memset(pwm_register_array+1, 0xFF, 8);
for(i=0; i<8; i++) {
is31_write_data(i, full_page, 1+0x12);
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
is31_write_data(0, pwm_register_array, 9);
chThdSleepMilliseconds(5);
}
/* enable breathing when the displayed page changes */
@ -315,47 +449,8 @@ void led_controller_init(void) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
/* Write pages */
for(i=0; i<8; i++) {
is31_write_data(1,(uint8_t *)(led_game+(9*i)),9);
chThdSleepMilliseconds(5);
is31_write_data(2,(uint8_t *)(led_all+(9*i)),9);
chThdSleepMilliseconds(5);
}
// clean up the capslock LED
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
/* more time consuming LED processing should be offloaded into
* a thread, with asynchronous messaging. */
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
}
//TODO: Don't know equivalent QMK hooks for these
//
//void hook_usb_suspend_entry(void) {
//#ifdef SLEEP_LED_ENABLE
// chSysLockFromISR();
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
// chSysUnlockFromISR();
//#endif /* SLEEP_LED_ENABLE */
//}
//
//void hook_usb_suspend_loop(void) {
// chThdSleepMilliseconds(100);
// /* Remote wakeup */
// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
// send_remote_wakeup(&USB_DRIVER);
// }
//}
//
//void hook_usb_wakeup(void) {
//#ifdef SLEEP_LED_ENABLE
// chSysLockFromISR();
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
// chSysUnlockFromISR();
//#endif /* SLEEP_LED_ENABLE */
//}
//*/

44
keyboards/infinity60/led_controller.h
View file

@ -26,12 +26,15 @@ msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
/* =========================
* init functions
* ========================= */
/* ============================
* init functions/definitions
* ============================*/
void led_controller_init(void);
#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
#define NUM_LOCK_LED_ADDRESS 85
/* =============================
* IS31 chip related definitions
* ============================= */
@ -55,7 +58,7 @@ void led_controller_init(void);
#define IS31_REG_DISPLAYOPT 0x05
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
// D2:D0 bits blink period time (*0.27s)
#define IS31_REG_AUDIOSYNC 0x06
@ -82,20 +85,35 @@ void led_controller_init(void);
#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
/* ==============================
* LED Thread related definitions
* ============================== */
/* ========================================
* LED Thread related items
* ========================================*/
extern mailbox_t led_mailbox;
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
// constants for signaling the LED controller thread
enum led_msg_t {
LED_MSG_CAPS_ON,
LED_MSG_CAPS_OFF,
LED_MSG_SLEEP_LED_ON,
LED_MSG_SLEEP_LED_OFF,
LED_MSG_ALL_TOGGLE,
LED_MSG_GAME_TOGGLE
KEY_LIGHT,
SET_FULL_ROW,
OFF_LED,
ON_LED,
TOGGLE_LED,
BLINK_OFF_LED,
BLINK_ON_LED,
BLINK_TOGGLE_LED,
TOGGLE_ALL,
TOGGLE_BACKLIGHT,
DISPLAY_PAGE,
RESET_PAGE,
TOGGLE_NUM_LOCK,
TOGGLE_CAPS_LOCK,
TOGGLE_BREATH,
STEP_BRIGHTNESS
};
#endif /* _LED_CONTROLLER_H_ */