diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/4x5/4x5.c
similarity index 92%
rename from keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c
rename to keyboards/handwired/dactyl_manuform/4x5/4x5.c
index 17caecb4fd..78c0fee819 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c
+++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.c
@@ -1,4 +1,4 @@
-#include "dactyl_manuform.h"
+#include "4x5.h"
#ifdef SSD1306OLED
diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/4x5/4x5.h
similarity index 98%
rename from keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h
rename to keyboards/handwired/dactyl_manuform/4x5/4x5.h
index 7e126d3017..b34d97adbf 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h
+++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.h
@@ -1,5 +1,4 @@
-#ifndef REV2_H
-#define REV2_H
+#pragma once
#include "dactyl_manuform.h"
@@ -68,4 +67,4 @@
\
}
#endif
-#endif
+
diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h
index 8917630e4a..c8417a2f0f 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x5/config.h
@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
@@ -26,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER tshort
-#define PRODUCT Dactyl-Manuform
#define DESCRIPTION A split keyboard for the cheap makers
/* key matrix size */
@@ -45,53 +43,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
-/* mouse config */
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_DELAY 0
-#define MOUSEKEY_TIME_TO_MAX 60
-#define MOUSEKEY_MAX_SPEED 7
-#define MOUSEKEY_WHEEL_DELAY 0
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Enables This makes it easier for fast typists to use dual-function keys */
-#define PERMISSIVE_HOLD
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12 // Number of LEDs
-#define ws2812_PORTREG PORTD
-#define ws2812_DDRREG DDRD
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-
-#endif
diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk
index 99ac2880d5..14b6e1e4e3 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk
+++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk
@@ -1,47 +1,3 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
@@ -59,10 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SUBPROJECT_rev1 = yes
-USE_I2C = yes
+
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-SPLIT_KEYBOARD = yes
-
diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/5x6/5x6.c
similarity index 92%
rename from keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c
rename to keyboards/handwired/dactyl_manuform/5x6/5x6.c
index 17caecb4fd..68fceffd92 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c
+++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.c
@@ -1,4 +1,4 @@
-#include "dactyl_manuform.h"
+#include "5x6.h"
#ifdef SSD1306OLED
diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/5x6/5x6.h
similarity index 97%
rename from keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h
rename to keyboards/handwired/dactyl_manuform/5x6/5x6.h
index 5c1a4339bd..cb225a2cf2 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h
+++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.h
@@ -1,5 +1,4 @@
-#ifndef REV2_H
-#define REV2_H
+#pragma once
#include "dactyl_manuform.h"
@@ -44,4 +43,4 @@
{ R50, R51, R52, R53, KC_NO, KC_NO }, \
}
-#endif
+
diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h
index 97495e9350..06ac02dfcb 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/config.h
+++ b/keyboards/handwired/dactyl_manuform/5x6/config.h
@@ -16,18 +16,12 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
#include "config_common.h"
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER tshort
-#define PRODUCT Dactyl-Manuform
-#define DESCRIPTION A split keyboard for the cheap makers
+
+#define PRODUCT Dactyl-Manuform (5x6)
/* key matrix size */
// Rows are doubled-up
@@ -45,53 +39,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
-/* mouse config */
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_DELAY 0
-#define MOUSEKEY_TIME_TO_MAX 60
-#define MOUSEKEY_MAX_SPEED 7
-#define MOUSEKEY_WHEEL_DELAY 0
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Enables This makes it easier for fast typists to use dual-function keys */
-#define PERMISSIVE_HOLD
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12 // Number of LEDs
-#define ws2812_PORTREG PORTD
-#define ws2812_DDRREG DDRD
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-
-#endif
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h
new file mode 100644
index 0000000000..29ab59ad66
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h
@@ -0,0 +1,27 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#pragma once
+
+
+#define USE_SERIAL
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+//#define EE_HANDS
+// Rows are doubled-up
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c
new file mode 100644
index 0000000000..d0bcbd4e6b
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c
@@ -0,0 +1,71 @@
+#include QMK_KEYBOARD_H
+
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+
+#define SFT_ESC SFT_T(KC_ESC)
+#define CTL_BSPC CTL_T(KC_BSPC)
+#define ALT_SPC ALT_T(KC_SPC)
+#define SFT_ENT SFT_T(KC_ENT)
+
+#define KC_ML KC_MS_LEFT
+#define KC_MR KC_MS_RIGHT
+#define KC_MU KC_MS_UP
+#define KC_MD KC_MS_DOWN
+#define KC_MB1 KC_MS_BTN1
+#define KC_MB2 KC_MS_BTN1
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+#define _______ KC_TRNS
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+
+ [_QWERTY] = LAYOUT_5x6(
+ KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
+ KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
+ KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
+ KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
+ KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
+ RAISE,KC_SPC, KC_ENT, LOWER,
+ KC_TAB,KC_HOME, KC_END, KC_DEL,
+ KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
+ ),
+
+ [_LOWER] = LAYOUT_5x6(
+
+ KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
+ _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
+ _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
+ _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS,
+ _______,KC_PSCR, _______, KC_P0,
+ _______,_______, _______,_______,
+ _______,_______, _______,_______,
+ _______,_______, _______,_______
+),
+
+ [_RAISE] = LAYOUT_5x6(
+ KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
+ _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
+ _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD,
+ _______,_______, KC_EQL ,_______,
+ _______,_______, _______,_______,
+ _______,_______, _______,_______,
+ _______,_______, _______,_______
+ ),
+
+ };
+
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h
index 1a7d1e0659..d046806eaa 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h
@@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#pragma once
#define USE_SERIAL
@@ -22,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
//#define EE_HANDS
// Rows are doubled-up
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 6
-
-#include "../../config.h"
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
index 7dd9f7c869..0282ccc7f9 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
@@ -1,6 +1,4 @@
-#include "dactyl_manuform.h"
-#include "action_layer.h"
-#include "eeconfig.h"
+#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
@@ -33,18 +31,18 @@ extern keymap_config_t keymap_config;
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QWERTY] = LAYOUT_5x6(
- KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
- KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
- KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
- KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
- KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
- RAISE,KC_SPC, KC_ENT, LOWER,
- KC_TAB,KC_HOME, KC_END, KC_DEL,
- KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
- ),
+ [_QWERTY] = LAYOUT_5x6(
+ KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
+ KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
+ KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
+ KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
+ KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
+ RAISE,KC_SPC, KC_ENT, LOWER,
+ KC_TAB,KC_HOME, KC_END, KC_DEL,
+ KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
+ ),
- [_LOWER] = LAYOUT_5x6(
+ [_LOWER] = LAYOUT_5x6(
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk
index 6b1201781a..14b6e1e4e3 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/rules.mk
+++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk
@@ -1,47 +1,3 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-# This definition is optional, and if your keyboard supports multiple bootloaders of
-# different sizes, comment this out, and the correct address will be loaded
-# automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
@@ -59,9 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SUBPROJECT_rev1 = yes
-USE_I2C = yes
+
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-SPLIT_KEYBOARD = yes
\ No newline at end of file
diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h
new file mode 100644
index 0000000000..19cd356d89
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/config.h
@@ -0,0 +1,78 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x3060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER tshort
+// defined in subfolder
+#define DESCRIPTION A split keyboard for the cheap makers
+
+/* mouse config */
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_DELAY 0
+#define MOUSEKEY_TIME_TO_MAX 60
+#define MOUSEKEY_MAX_SPEED 7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Enables This makes it easier for fast typists to use dual-function keys */
+#define PERMISSIVE_HOLD
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12 // Number of LEDs
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c
new file mode 100644
index 0000000000..043bbd5672
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c
@@ -0,0 +1 @@
+#include "dactyl_manuform.h"
diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h
new file mode 100644
index 0000000000..6c23e9143d
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h
@@ -0,0 +1,22 @@
+#pragma once
+
+
+#ifdef KEYBOARD_handwired_dactyl_manuform_5x6
+ #include "5x6.h"
+#elif KEYBOARD_handwired_dactyl_manuform_4x5
+ #include "4x5.h"
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+#endif
+#endif
+
+
diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md
new file mode 100644
index 0000000000..eb76a7150e
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/readme.md
@@ -0,0 +1,142 @@
+Dactyl Manuform 5x6
+======
+the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
+
+
+
+## First Time Setup
+
+Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
+
+```
+$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME
+```
+
+If everything worked correctly you will see a file:
+
+```
+dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex
+```
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
+
+## Keymaps
+Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
+### Impstyle
+
+
+
+Required Hardware
+-----------------
+
+Apart from diodes and key switches for the keyboard matrix in each half, you
+will need:
+
+* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
+* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
+
+Alternatively, you can use any sort of cable and socket that has at least 3
+wires. If you want to use I2C to communicate between halves, you will need a
+cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
+
+Optional Hardware
+-----------------
+A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
+
+Wiring
+------
+
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
+PD0 on the ATmega32u4) between the two Pro Micros.
+
+Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
+and modify the `matrix.c` accordingly.
+
+The wiring for serial:
+
+
+
+The wiring for i2c:
+
+
+
+The pull-up resistors may be placed on either half. It is also possible
+to use 4 resistors and have the pull-ups in both halves, but this is
+unnecessary in simple use cases.
+
+You can change your configuration between serial and i2c by modifying your `config.h` file.
+
+Notes on Software Configuration
+-------------------------------
+
+the keymaps in here are for the 4x5 layout of the keyboard only.
+
+Flashing
+-------
+From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
+Example: `make lets_split/rev2:default:avrdude`
+
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
+
+
+Notes on Using Pro Micro 3.3V
+-----------------------------
+
+Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
+the frequency on the 3.3V board.
+
+Also, if the slave board is producing weird characters in certain columns,
+update the following line in `matrix.c` to the following:
+
+```
+// _delay_us(30); // without this wait read unstable value.
+_delay_us(300); // without this wait read unstable value.
+```
diff --git a/keyboards/handwired/dactyl_manuform/rules.mk b/keyboards/handwired/dactyl_manuform/rules.mk
new file mode 100644
index 0000000000..adb058c8af
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/rules.mk
@@ -0,0 +1,66 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes