Remove ee_hands config from ferris/sweep firmware (#23029)

This commit is contained in:
Tom Barnes 2024-02-07 00:25:15 +00:00 committed by GitHub
parent 3f6e362b8d
commit ffc45ac80c
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
2 changed files with 0 additions and 30 deletions

View file

@ -1,9 +0,0 @@
// Copyright 2018-2020
// ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
// David Philip Barr <@davidphilipbarr>
// Pierre Chevalier <pierrechevalier83@gmail.com>
// SPDX-License-Identifier: GPL-2.0+
#pragma once
#define EE_HANDS

View file

@ -17,27 +17,6 @@ Make example for this keyboard (after setting up your build environment):
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Setting Handedness
Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands for Pro micros are:
make ferris/sweep:default:avrdude-split-left
make ferris/sweep:default:avrdude-split-right
For Elite-C or compatible controllers using `DFU` bootloader, add the line `BOOTLOADER = atmel-dfu` into the user keymap `rules.mk` file and use the following make commands:
make ferris/sweep:default:dfu-split-left
make ferris/sweep:default:dfu-split-right
[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
### RP2040 Controllers
Pro Micro RP2040 controllers are supported with [QMK Converters](https://docs.qmk.fm/#/feature_converters). The make command example with handedness setting for Adafruit's KB2040 are:
make CONVERT_TO=kb2040 ferris/sweep:default:uf2-split-left
make CONVERT_TO=kb2040 ferris/sweep:default:uf2-split-right
## Bootloader
Enter the bootloader in 3 ways: