* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
Fix reddit link
Duplicate open parenthesis next to close parenthesis on NSSL
Add customisation instructions
Add lily58
Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>
Clean up LAYOUT macro formatting
Add alternative vi-style navigation layout
Add kyria
Add minidox
Change order of keyboards
Add iris
Expand TOC
Re-order userspace subheadings
Add atreus
Add customisation section
Add split_3x5_3 and split_3x6_3 layouts
Add for_science
Fix wrong paths in keyboard config.h and keymap.c headings
Fix keyboard ordering
Fix blank lines around headings
Add compatibility with new org-mode version.
Remove keyboards/crkbd now covered by layouts/split_3x6_3
Add Halmak
Alphabetise alternative alpha arrangements
Move build options out of base layer alphas headings
Add list of keyboards supporting split_3x5_3 layout
Enable Auto Shift and Retro Shift
Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)
Change kyria thumb key mapping
Add planck_mit layout
Remove alternative bottom row support from ortho_4x12
Remove minidox
- Covered by split_3x5_3 layout
Add moonlander
Remove KC_ macros
Add 60_ansi layout
Add ortho_5x15 layout
Closesmanna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>
Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>
Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Add AUTO_SHIFT_NO_SETUP to reduce firmware size
Update image paths
Add instructions to checkout development branch
Add kyria extended thumbs option, change default, add KLE
Change clipboard keys
- Change order to be mirror of windows bindings
- Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
- Add alternative bindings
- Fun Cluster (original miryoku bindings)
- Mac
- Windows
- Change prefix for local macros from X_ to U_
Disable Retro Shift, enable Auto Shift for non-alphas
Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"
Add Experimental Features section
Update miryoku image link
Update cover image link
Add dactyl_manuform/4x5
Add cutomisation examples
Add https to remote example
Fix dactyl_manuform/4x5 subset mapping
Add extended thumbs to ortho_4x12
Update Colemak Mod-DH naming
Closesmanna-harbour/qmk_firmware#13
Add dactyl_manuform/5x6
Resolvesmanna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>
Add note on FORCE_LAYOUT
- Needed to use EXTENDED_THUMBS on planck
Add parent directories to keyboard headings and re-order
Add keyboardio/atreus
Resolvesmanna-harbour/qmk_firmware#15
Add torn
Resolvesmanna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Change map to zip
- Adds support for python3, still compatible with python2.
Resolvesmanna-harbour/qmk_firmware#10Resolvesmanna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>
Add python-version
Add sofle
Add ergotravel
Add ortho_5x12
Add ortho_4x10
Add :main no header argument to C code blocks
resolvesmanna-harbour/qmk_firmware#11resolvesmanna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>
Add flipped layers and inverted-T nav alternative layouts
- Separate tap_table into alphas_table and thumbs_table
- Add mode argument to table-layout-half
- Remove layer_name
- Rename layers
- Add mods and clipboard to MBO and mirror
- Add MIRYOKU_LAYERS=FLIP
- Add MIRYOKU_NAV=INVERTEDT
Add layer diagrams
Update contact section
Update links for Bilateral Combinations and Retro Shift
Add description and no reverse angle option to 60_ansi layout
Update list of keyboards supporting community layouts
- and example build command lines
Change moonlander thumb keys
Update list of keyboards supporting split_3x5_3
Add license to tangled C source files
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard)
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
-> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit
bfe468ef1 start morphing wavetable
474d100b5 refined a bit
208bee10f play_notes working
3e6478b0b start in-place documentation of dac settings
3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right)
73853d651 5 voices at 44.1khz
dfb401b95 limit voices to working number
9632b3379 configuration for the ez
6241f3f3b notes working in a new way
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commit splits off the plank example keymap from commit
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
* refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac
* refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation
pulls three copies of the same code into one function
which should improve readability and maintainability :-)
* refactoring: move common code of arm and avr implementation into a separate/new file
* refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs
* refactoring: audio_avr_pwm - replacing function defines with plain register defines
aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing
* add audio-arm-pwm
since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx)
this code works on a "BluePill" clone, with an STM32F103C8B
* clang-format changes on quantum/audio/* only
* audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths
* audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup)
* refactoring: remove unused file from/for atmel-avr chips
* refactoring: remove unused (avr) wavetable file
* audio_arm_dac: adapt dac_end callback to changed chibios DAC api
the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object.
this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count
* audio-arm-dac: show a compile-warning on undefined audio-pins
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio_arm_dac: switch from exemplary wavetable generation to sine only
sine+triangle+squrare is exemplary, and not realy fit for "production" use
'stairs' are usefull for debugging (hardware, with an oscilloscope)
* audio_arm_dac: enable output buffers in the STM32
to drive external loads without any additional ciruitry - external opamps and such
* audio: prevent out-of-bounds array access
* audio_arm_dac: add output-frequency correcting factor
* audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition
and do some code-cleanup, refine documentation, ...
* audio_arm_pwm: increase pwm frequency for "higher fidelity"
on the previous .frequency=100000 higher frequency musical notes came out wrong
(frequency measured on a Tektronix TDS2014B)
note | freq | arm-pwm
C2 | 65.4 | 65.491
C5 | 523.25 | 523.93
C6 | 1046.5 | 1053.38
C7 | 2093 | 2129
C8 | 4186 | 4350.91
with .frequency = 500000
C8 | 4186 | 4204.6
* audio refactoring: remove unused variables
* audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second
* audio: allow feature selection in rules.mk
so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up)
or select the "pin alternate" pwm mode, for example on STM32F103
* audio-refactoring: move codeblocks in audio.[ch] into more coherent groups
and add some inline documentation
* audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm]
untangeling the relation between audio.c and the two drivers
and adding more documenting comments :-)
* audio_avr_pwm: getting it back into working condition, and cleanup+refactor
* audio-refactoring: documentation and typo fixes
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* audio-refactoring: cleanup defines, inludes and remove debug-prints
* audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range
to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently
also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged'
* audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers
* audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable
* audio_chibios_dac: math.h has fmod for this
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface
* audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines
have the user select a pin by configuration in rules.mk instead of a define in config.h
has the advantage of beeing in a common form/pattern across all audio-driver implementations
* audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines
* audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played
* audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG
through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency...
* audio-refactoring: get 'play_note' working again
with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue
* audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment)
* audio-refactoring: moore documentation
and some cleanup
* audio-avr-pwm: no fallback on unset AUDIO_PIN
this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy
* audio-refactoring: untangling terminology: voice->tone
the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet)
* audio-pwm: allow freq=0 aka a pause/rest in a SONG
continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion)
* audio-refactoring: audio_advance_note -> audio_advance_state
since it does not only affect 'one note', but the internally kept state as a whole
* audio-refactoring: untangling terminology: polyphony
the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time
* audio-chibios-dac: add zero-crossing feature
have tones only change/stop when the waveform approaches zero - to avoid audible clicks
note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too
* audio-refactoring: feature: time-multiplexing of tones on a single output channel
this feature was in the original avr-pwm implementation misnomed as "polyphony"
with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) )
* audio-avr-pwm: get music-mode working (again) on AVRs
with both pwm channels, or either one of the two :-)
play_notes worked already - but music_mode uses play_note
* audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE
since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note
* audio-arm-dac: per define selectable sample-luts
plus generation script in ./util
* audio-refactoring: heh, avr has a MIN...
* audio-refactoring: add basic dac audio-driver based on the current/master implementation
whereas current=d96380e65496912e0f68e6531565f4b45efd1623
which is the state of things before this whole audio-refactoring branch
boiled down to interface with the refactored audio system = removing all
redundant state-managing and frequency calculation
* audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER
* audio-arm-pwm: split the software/hardware implementations into separate files
which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained
* audio-refactoring: update documentation
* audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic
* audio-arm-dac: dac_additive: stop the hardware when the last sample completed
the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes
* audio-refactoring: make function-namespace consistent
- all (public) audio functions start with audio_
- also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note
* audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_
* audio-arm-dac: update (inline) documentation regarding MAX for sample values
* audio-chibios-dac: remove zero-crossing feature
didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway
* audio-arm-dac: dac_basic: respect the configured sample-rate
* audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle
like it already does in the avr implementation
* audio-refactoring: get VIBRATO working (again)
with all drivers (verified with chibios_[dac|pwm])
* audio-arm-dac: zero-crossing feature (Mk II)
wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones
* audio-refactoring: re-add note-resting -> introduce short_rest inbetween
- introduce a short pause/rest between two notes of the same frequency, to separate them audibly
- also updating the refactoring comments
* audio-refactoring: cleanup refactoring remnants
remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system
also updates the TODOS
* audio-refactoring: reserve negative numbers as unitialized frequencies
to allow the valid tone/frequency f=0Hz == rest/pause
* audio-refactoring: FIX: first note of melody was missing
the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone
and some code-indentations/cleanup of related parts
* audio-arm-dac: fix hardware init-click
due to wron .init= value
* audio-refactoring: new conveniance function: audio_play_click
which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c
* audio-refactoring: use milliseconds instead of seconds for 'click' parameters
clicks are supposed to be short, seconds make little sense
* audio-refactoring: use timer ticks instead of counters
local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature
decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway
* audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks
* audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c
also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines
* audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision
since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace
* audio.c: stop notes after new ones have been started
avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks
* audio.c: bugfix: actually play a pause
instead of just idling/stopping which lead the pwm drivers to stop entirely...
* audio-arm-pwm: pwm-software: add inverted output
new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT
* audio-arm-dac: basic: handle piezo configured&wired to both audio pins
* audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring
* audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps
avoids running into issues when the uint32 of the timer overflows
* audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST
* audio_arm_dac: basic: add missing bracket
* audio.c: fix delta calculation
was in the wrong place, needs to use the 'last_timestamp' before it was reset
* audio-refactoring: buildfix: wrong legacy macro for set_timbre
* audio.c: 16bit timerstamps suffice
* audio-refactoring: separate includes for AVR and chibios
* audio-refactoring: timbre: use uint8 instead of float
* audio-refactoring: duration: use uint16 for internal per-tone/note state
* audio-refactoring: tonemultiplexing: use uint16 instead of float
* audio-arm-dac: additive: set second pin output-low
used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE
* audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h
to be consistent with how other features are handled in QMK
* audio-refactoring: buildfix: wrong legacy macro for set_tempo
* audio-arm-dac: additive: set second pin output-low -- FIXUP
* audio.c: do duration<>ms conversion in uint instead of float
on AVR, to save a couple of bytes in the firmware size
* audio-refactoring: cleanup eeprom defines/usage
for ARM, avr is handled automagically through the avr libc and common_features.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio.h: throw an error if OFF is larger than MAX
* audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop
to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW
one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE
show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise.
the extra pusles probably matter little, since this is no high-fidelity sound generation :P
* audio-arm-dac: additive: move zero-crossing code out of dac_value_generate
which is/should be user-overridable == simple, and doing one thing: providing sample values
state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback
* audio-arm-dac: dac-additive: zero-crossing: ramping up or down
after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally
same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output
* audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing
fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause
* audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF
1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P
* audio-arm-dac: update synth_sample/_wavetable for new pin-defines
* audio-arm-dac: default for AUDIO_DAC_VALUE_OFF
turned out that zero or max are bad default choices:
when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late
* audio-arm-dac: additive: use DAC for negative pin
instead of PAL, which only allows the pin to be configured as output; LOW or HIGH
* audio-arm-dac: more compile-time configuration checks
* audio-refactoring: typo fixed
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: add defines for B-pin as primary/only speaker
also updates documentation.
* audio-refactoring: update documentation with proton-c config.h example
* audio-refactoring: move glissando (TODO) to voices.c
refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c
still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input?
* audio-refactoring: cleanup: one round of aspell -c
* audio-avr-pwm: back to AUDIO_PIN
since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5
so there is no need to deal with separate defines like AUDIO_PIN_B5
* audio-refactoring: add technical documentation audio_driver.md
which moves some in-code documentation there
* audio-arm-dac: move AUDIO_PIN checks into c-code
instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler)
* audio-arm-dac: compile-fix: set AUDIO_PIN if unset
workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error"
* audio-refactoring: document tone-multiplexing feature
* audio-refactoring: Apply suggestions from documentation review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-refactoring: Update docs/audio_driver.md
* audio-refactoring: docs: fix markdown newlines
Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>).
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-arm-dac: additive: fix AUDIO_PIN_ALT handling
* audio-arm-pwm: align define naming with other drivers
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-refactoring: set detault tempo to 120
and add documentation for the override
* audio-refactoring: update backlight define checks to new AUDIO_PIN names
* audio-refactoring: reworking PWM related defines
to be more consistent with other QMK code
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-arm: have the state-update-timer user configurable
defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c)
stm32f1 might need to set this to GPTD4, since 6 and 8 are not available
* audio-refactoring: PLAY_NOTE_ARRAY was already removed in master
* Add prototype for startup
* Update chibiOS dac basic to disable pins on stop
* Add defaults for Proton C
* avoid hanging audio if note is completely missed
* Don't redefine pins if they're already defined
* Define A4 and A5 for CTPC support
* Add license headers to keymap files
* Remove figlet? comments
* Add DAC config to audio driver docs
* Apply suggestions from code review
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Add license header to py files
* correct license header
* Add JohSchneider's name to modified files
AKA credit where credit's due
* Set executable permission and change interpeter
* Add 'wave' to pip requirements
* Improve documentation
* Add some settings I missed
* Strip AUDIO_DRIVER to parse the name correctly
* fix depreciated
* Update util/audio_generate_dac_lut.py
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Fix type in clueboard config
* Apply suggestions from tzarc
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Johannes <you@example.com>
Co-authored-by: JohSchneider <JohSchneider@googlemail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joshua Diamond <josh@windowoffire.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* enable LTO for smaller firmware size
* delete since this was added to userspace rules.mk
* readme updates and new images
* Add -j to compile and flash commands in userpsace
* Enable NKRO
* Enable NKRO, VIA, LTO by default
* Stanrc85-ansi readme update
* Stanrc85-alice readme
* quick RGB layer indicator fix in keymap
* Don't block keys during startup animation
* More refinements related to startup and debug state
* restore key logging
* some cleanup on scan rate reporting
* trim some fat
* better lighting to indicate jumped to bootloader
* use eeprom for state restoration
* a little reorganization
* report version immediately when turn on debug
* hold-to-adjust for hue, sat, val
* cformat
* reorg rules.mk settings, fix compile with CONSOLE_ENABLE=no
* simplify spidey3 userspace
* NULL in layer list caused buggy behavior
* more bugfix
* update numpad layout to match matt30 MT3 /dev/tty keycaps
* swap emdash and endash
* map shift+backspace to delete
* removing NO_ACTION_ONSHOT makes the firmware SMALLER ?!
* cformat
* improve spi_glow
* disable shift-backspace = delete by default
* Initial support for Durgod K320 with BootMagic Lite
- Adding missing files
- Add Unicode Map Support & new user keymap
- Remove personalized features from Default keymap
- Added Unicode Map to both Default and kuenhlee keymap.c
- Updated readme.md
- Added additional Fn Shortcut keys
* Additional support for Durgod K320
- Simplifying default keymap
- Renaming durgod_k320 => durgod/k320
- Removing copy of ST_NUCLEO64_F070RB from K320. Replacing with local board.h
- Adding Mac keyboard layout for K320 as alternative via Fn+F12
- Implementing Windows Key lock on K320
- Cleaning up duplicated core functionality
- Adding default_toggle_mac_windows keymap with:
- Ability to toggle between Windows and MacOS layout
- Mac Media Lock functionality.
* Updating K320 keymap readme
Co-authored-by: kuenhlee <eos.camera.lee@gmail.com>
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
* Initial commit for my Corne keyboard layout.
* Updates to Corne, etc.
Finished working on primary layout for Corne keyboard.
Cleaned up some comments for my 4x12 Ortho layout.
* Changes for crkbd layout
* Fixed the config.h to reflect using ee_hands
* Added RGB configs to crkbd/corne layout
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* Reset everything to upstream, reapply Bocaj changes
* Bocaj - address PR comments
* Just in time changes
* Bocaj - Several adjustments after using the layout for a while
* Add LAYOUT_alice support: fallacy
* Add LAYOUT_alice support: kb_elmo/sesame
* Add LAYOUT_alice support: cheshire/curiosity
* Add LAYOUT_alice support: evyd13/wonderland
* Add LAYOUT_alice support: mechlovin/adelais
* Update LAYOUT_alice support: projectkb/alice
The PR that added Alice community layout support for the projectkb/alice/rev2 simultaneously broke support for every other keyboard that supported LAYOUT_alice.
This commit partially reverts the offending PR. `LAYOUT_alice` for the projectkb/alice has been renamed to `LAYOUT_alice_split_bs`, and a correct 65-key `LAYOUT_alice` has been added.
Additionally, the `LAYOUTS` rule has been moved to keyboard level as the layout macros are shared between rev1 and rev2 boards, which means the layout options are the same for both revisions.
* Update ramonimbao/aelith info.json
Keyboard source was already correct to support LAYOUT_alice, but the layout tree was missing from info.json.
* Fork `alice` Community Layout...
... into Standard and Split Backspace versions
Also updates stanrc85's layout keymap to use 65 keys instead of the Split Backspace 66-key version.
* Update LAYOUT_alice support: sneakbox/aliceclone
Rework the sneakbox/aliceclone to use the Split Backspace Alice layout.
* Update LAYOUT_alice support: zoo/wampus
The layout macro that was `LAYOUT_alice` was 66 keys. This layout macro has been renamed to `LAYOUT_alice_split_bs`, and a 65-key `LAYOUT_alice` has been added.
Additionally, the 66-key macro has been rearranged to accept its keycodes in the intended order for Community Layout support.
* Update keyboards for `LAYOUT_alice_split_bs` support
* LAYOUT_alice_split_bs support: ergosaurus
* LAYOUT_alice_split_bs support: handwired/colorlice
* LAYOUT_alice(_split_bs) support: handwired/owlet60
* LAYOUT_alice_split_bs support: nightly_boards/alter/rev1
* LAYOUT_alice(_split_bs) support: sck/osa
* LAYOUT_alice_split_bs support: tgr/alice
* LAYOUT_alice(_split_bs) support: tkc/osav2
* LAYOUT_alice_split_bs support: xelus/valor/rev1
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Refactor the crkbd/via keymap and fix OLED bugs
* Revert "Refactor the crkbd/via keymap and fix OLED bugs"
This reverts commit dc9db029fc6b077fc7600b49e920b755c522d100.
* Fix OLED display bugs
* Remove unused functions
* Remove uncessary the key logger
* Add new lines at end of file
* Remove unnecesary extern for is_master
* Remove extern is_master from rev1.h
* Remove ssd1306 from common dir because its the legacy lib
* Update default keymap based the via keymap
* Remove foostan keymap because it will be legacy
* Revert Remove unnecesary extern for is_master
* Remove unnecessary backslashes.
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* add 65_ansi_split_bs to default community layouts
* Update layouts/default/65_ansi_split_bs/layout.json
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* my alice community layout
* add LAYOUT_alice support to projectkb/alice/rev2
* add addition BSPC key to default layout
* add define to support LAYOUT_default
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* Added LAYOUT_alice
* Added fauxpark's suggestions as well as updating keymap graphic
* Added file header and used noroadleft's fix to the info.json for fast input mode
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Add Chrome OS specific keys to 75_ansi/spidey3
* Clean up duplicative settings in rules.mk
* Refactor spidey3 userspace to use rgb layer blink
* Blink green on wakeup
* Improve _FN layer indicator
* Glyph transformation modes: wide, script, fraktur, and enclosed characters
* Add spider unicode glyph
* Fix compile error when NO_ACTION_ONESHOT
* Add a few more emoji
* Further refinement of lighting layer usage
* Fix reversed yes/no ack
* Lighting layers override RGB off
* Fix missing wide and incorrect script numbers
* Add LOL and surprise emoji
* Add missing break in switch statement
* Trim firmware size
* Use usage ID definitions in report.h
* Some minor whitespace cleanup
* Disable some unused features to reduce firmware size
* Print version on startup
* Seed rand() on first keystroke
* Add a key to immediately sleep CrOS
* Switch to Bootmagic Lite
* Trim down firmware size a little bit more
* Make RGBLIGHT_MODE_TWINKLE+4 my default
* Scan rate debug / fix version printing
Delay printing version on startup (console may not be ready)
Better scan rate reporting
* Disable locking caps, etc. to save more space
* Enable LTO
* Better seed for rand()
* Set MAX_LAYER for some performance improvement
* Another scan rate improvement
* Set manufacturer
* New startup animation
* Add GUI lock for F-keys (for CrOS)
* Add visual indication for glyph replacement and F-keys GUI lock
* Some cleanup; run cformat on spidey3 userspace
* Cycle between debug verbosity options
* Fix disable RGB Lighting after wakeup on Mac
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* initial commit for tsangan_hhkb community layout
* keymap.c done
* wrote readme
* move media keys; add shortcuts
* edit to reflect changes in keymap
* update readme with imgur link
* Community layout support for KBD67 hotswap
* Community layout support for KBD67 rev1
* Community layout support for KBD67 rev2
* Move bcat's KBD67 hotswap layout to community
* Move menu key on ergo boards to match staggered
* Unify 60_tsangan_hhkb and 60_ansi_split_bs_rshift
* Sync KBD67, Quefrency with community layouts
* Update ergo KLE images
* Update community layout KLE images
* Update KLE images/descriptions for remaining keebs
* Add 65 ANSI Blocker Split BS default layout
- Add new 65 ANSI Blocker Split BS layout as many 65 ANSI Blocker layouts also support split backspace
* Add 65 ANSI Blocker Tsangan default layout
- Add new 65 ANSI Blocker Tsangan layout as many 65 ANSI Blocker layouts also support a split backspace and a 7u bottom row configuration.
* Fix file names
* Fix 65_ansi_blocker_tsangan keymap
* Fix 65_ansi_blocker_split_bs alignment
* Fix readme name for 65_ansi_blocker_split_bs
* Change 65_ansi_blocker_tsangan to 2u backspace
* Change spaces in preview to NBSP
* Change more spaces in preview to NBSP (right-alt)
* Give Tsangan layout a real Fn2 layer
* Disable mouse keys to work around qmk#8323
I don't actually use this feature, so there's no reason for it to be
enabled anyway, and it seems to cause spurious wakeups on Windows.
* First cut at Josh Diamond's KBD75 customizations.
Includes:
* My unique keymap with ChromeOS specific keys
* Use RGB underglow to indicate Caps Lock
* Some unicode bindings
* Some changes to make debugging easier
* Updated spidey3 to be applicable to all 75_ansi boards
* Sadly, ChromeOS doesn't pay attention to most consumer codes
* Add mac layer; fix flakeyness in CAPS_LOCK underglow.
* Make layers.json match the keymap (to the extent possible)
* Major cleanup; fix broken debug persistence
* Cleanup some whitespace issues
* Fix incorrect log message.
* Rework layer indication to user RGBLIGHT_LAYERS
* Update layouts/community/75_ansi/spidey3/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion
* Refactor to use set_single_persistant_default_layer().
* Use dprint/f to make logging more elegant.
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update layouts/community/75_ansi/spidey3/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/spidey3.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/layer_rgb.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/init.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes from code review
* Numpad layer, various keys for 75_ansi/spidey3
* Add Fn-B to toggle NKRO
* Blink rgb to acknowledge some setting changes
* Updated media control & reset key location
* Minor cleanup
Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Changes to my Ergodox & Planck keymaps
* Fixed Typos
Corrected some typos and omissions to my Ergodox layout and readme
* Fixed Typos
Fixed some typos in my ErgoDox Readme and keymap.c files
* Enable External EEPROM on Planck Rev6
* Update KC_MAKE macro to use qmk cli util
* Disable additional gradients for rgb matrix
* Update analog code for newer methods
* Update ergodox layout
* Disable Grave Escape
* Cleanup OLED code a bit
* Remove old unicode code
* Seperate RGB Matrix code from RGB Light code in userspace
* Massive overhaul an generalization of personal OLED code
Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.
* Super tiny cleanup
* Enable Diablo layer on kyria
* clang format pass
* Additional OLED cleanup
* First cut at Josh Diamond's KBD75 customizations.
Includes:
* My unique keymap with ChromeOS specific keys
* Use RGB underglow to indicate Caps Lock
* Some unicode bindings
* Some changes to make debugging easier
* Updated spidey3 to be applicable to all 75_ansi boards
* Sadly, ChromeOS doesn't pay attention to most consumer codes
* Add mac layer; fix flakeyness in CAPS_LOCK underglow.
* Make layers.json match the keymap (to the extent possible)
* Major cleanup; fix broken debug persistence
* Cleanup some whitespace issues
* Fix incorrect log message.
* Rework layer indication to user RGBLIGHT_LAYERS
* Update layouts/community/75_ansi/spidey3/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion
* Refactor to use set_single_persistant_default_layer().
* Use dprint/f to make logging more elegant.
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update layouts/community/75_ansi/spidey3/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/spidey3.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/layer_rgb.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/init.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes from code review
Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* WIP do not merge
* first pass at custom preonic layout
* add auto shift and reset via leader key
* Update readme
* update copyright notice
* formatting changes
* fix: use MO instead of process_record_user
* added backslash and moved grave position
* remove extraneous 'j' characer in NUMPAD template
* update template formatting
* remove process_record_user
* swap "!" with "@"
* fix readme formatting
* update readme layout image
* restore settings layer
* add windows minimize sequence
* fix: switch to correct seq function for three-key sequence
* fix: missing semicolon
* refactor: move keymap to userspace and generic 5x12 layout
* add numlock to numpad layer
* add readme
* update readme formatting
* remove unused wrappers from layout keymap
* update readme title to reflect new location
* remove alfrdmalr directory from preonic/keymaps
* add ortho 4x12 support
* add 'trilayer' settings and update keymap
* update SYMBOLS layer to SYMBOL
* remove minimize sequence
* clean up user config
* add brightness controls
* update settings ascii
* moved some symbols around to make vim/linux smoother
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* Use TAPPING_TERM constant (and redefine value to 200ms)
* change TAPPING_TOGGLE to 2 to require two taps to lock in layer 4
* add support for Shift-Command 3/4/5 key combinations that are used in
macOS Catalina
* avoid false positive tap detecion for RMOD3 when the whole sequence of
pressing RMOD3, tapping another key and releasing RMOD3 took less than
TAPPING_TERM milliseconds.
* replace SEND_STRING with tap_code()/tap_code16(), saving ~860 bytes in
compiled firmware size.
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add an 65_ansi community layout
- fix quoting because of comma in config.h
* Enable LAYOUT_65_ansi for tada68
* cleanups
* Update keyboards/tada68/tada68.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* ifdef rgb stuff like a madman for RGB Coexistance
* Re-enable RGB Light on Planck
* fix RGB Coexistance issue
* Tweak feature settings for Ergodox EZ Glow
* Their powers combine, and I am Captain RGB
This one is for noroadsleft and yan.
* Limit brightness when both RGB features are enabled
* Change shutdown method
* Add RGB Coexistience stuff to keymap
* disable RGBLIGHT_SLEEP until a solution can be found
* Disable Unicode on the kyria
* Fix up Iris rev defines
* Fix up community layouts to compile properly
* Cleanup rgb stuff
* Merge ergodox keymaps
* Update CCCV macro to use tap_code16
* Enable Solenoid on C39
Because josh couldn't
* Enable RGB Light, not Matrix on rev6 keymap
* Only enable LTO on non-ARM boards
* Clean up Bootmagic OLED display
* Enable RGBLIGHT_SPLIT on kyria
Not that it does anything
* Add hotkey for discord
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Fix gui
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Display logo for caps lock indication on crkbd using old OLED driver
* Add emacs read-only mode file variable to generated files
* use LTO_ENABLE instead of EXTRAFLAGS
This enables the same option, and disables action_macros, and action_functions, both of which seem to break when LTO is enabled. And this is a lot simpler to use.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Add three missing default layouts
* Add layout support to tragicforce68
* Not really 68%
* Fix dumb mistake
* Update info.json too
* Apply suggestions from code review
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
* Add Community Layout: 60_abnt2
Add a 60% version of the standard keyboard layout used in Brazil.
* Enable 60_abnt2 support for DZ60
* fix the indenting in the Community Layout keymap
* Add issmirnov {user, ergodox, levinson} files.
There are enough interesting QMK tricks in these layouts that it seems
worth it to share with the broader community. Big thanks to Drashna for
inspiration, as well as all the wonderful creators of QMK documentation.
Some highlights:
- Common layout shared between levinson and ergodox_ez
- TAP_TOG macro for fast layer switching
- Autogenerated keymaps ascii art with git hooks
I will do my best to do periodic rolls here, but the source of truth
will always be https://github.com/issmirnov/qmk-keebs
* Incorporate review feedback.
- Remove CLEAR_EEPROM in favor of built in EEP_RST
- Remove custom handlers for audio on bootup and shutdown
- Remove plethora of unneeded includes
- Remove deprecated and dupliated config options
HUGE thanks to drashna for the review!
* Apply suggestions from code review
Huge thanks to drashna@ for a very thorough review and the very useful suggestions.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Remove unclear optimization
This was an artifact from some other keymap I saw.
* Enable link-time optimization
* Make RGB static gradient ranges shorter
* Shift Quefrency media keys to the right
* Shift KBD67 media keys to the right
* Move some 60% keys from function to adjust layer
* Set "extra" Lily58 keys to browser back/forward
* Remove Instant60 EEPROM hack after #6968
* Remove unnecessary bits from macropad keymaps
* Update KLE images
* Added WOW layer
* Initial commit for this branch. Still a work in progress.
* Added Rorschach keyboard layout.
* Simplified keymap
Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.
* Added ErgoTravel keymap.
* reverted to previous layout.
* Added Sol keyboard layout.
* Minor changes to keymap.
* more changes
* Added sol graphic by Kagerufu and Cardiactuna
* Added colemak layer because I can.
* more changes to sol layout
* Streamlined Sol layout
* minor tweaks to sol layout
* further revisions to sol keymap.
* Removing deprecated #include statements from my keymaps
* Standardizing keymap `include` lines.
* Minor change to keymap.
Swapped ESC with GRV on all alpha layers.
* Tweaks to Atreus62 Keymap
Added a layer for FPS RPG Loot Shooters.
* Fixed readme.md for Atreus keymap.
Replaced "Keymap" with "Layer" in illustrations for continuity's sake
* More readme.md clean-up
More clarification in the Atreus readme file.
* Next verse, same as the first.
* Changes to Sol layout
Bringing my Sol layout more in line with my other Orthos.
* Fixed keymap GUI.
Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.
* Added ALPS64 keymap
* Formatting corrections
* fixes to config.h and keymap.c
* Fixed errors
This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.
* Fixed orthodox keymap config.h file
I hope this one fixes the problem. *sigh*
* Making suggested changes for PR#6192
Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.
* Fixing build errors
Travis has shown me the error of my ways...
* More fixes and corrections
Those pesky semicolons...
* More Fixes.
* Removing unneeded code snippet.
* fixed omitted semicolons
* Code updates to my keymaps
Updating the code for my Iris, Atreus62, and Atreus keymaps.
* Fixed Atreus62 Keymap
I forgot to add in the aliases for LOWER, RAISE, and ADJUST.
* Added userspace
Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro
* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.
* Moving userspace to new branch
Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.
* Added F13-F15 to Atreus62 Layout.
* Update readme.md.
* Updated Phantom keymap to current keymap standards
* Phantom keymap updates
Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!
* Standards Updates
Bringing my Kinesis keymap up to current code standards
* Adding a readme
* Bring GH60 code to standard
* Utilizing layouts for 60_ansi and tkl_ansi
Moving my GH60 and Phantom keymaps into layouts/community/
* Alps64 layout removal
Removing my Alps64 keymap now that I've setup my 60_ansi layout.
* Moved Clueboard layout to community/66_ansi.
* Additions to 66_ansi config.h
* Bringing keymaps up to standard.
* More updates to keymaps.
* Syntax updates
* Revert "Syntax updates"
This reverts commit a892b2d9fcc0d4ba8fc22d676d5414120cc2c183.
* Moved WIP keymaps
Moved my WIP keymaps to my wip_keymaps branch to keep my master clean
* Updates requested by noroadsleft
* more changes per noroadsleft
More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.
* Add Planck keymap and custom keycodes to userspace
* Add Preonic keymap and extract common ortho layers and keycodes
* Add Leaf60 WKL keymap
* Add M60-A keymap
* Add Levinson keymap
* Fix links in personal readmes
* Use flash target
* Remove duplicate definition
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove superfluous line endings
* Planck and preonic encoder should have the same behavior
* Use higher level API
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use layouts to reduce planck/levinson duplication
* Update flash instructions for levinson
* Enable PERMISSIVE_HOLD and TAPPING_FORCE_HOLD
* Fix indentation in userspace
* Shuffle around more Lily58 symbol keys
* Reformat KBD67 keymap and KLE images
* Fix Lily58 lower layer image
* Reformat Quefrency keymap and KLE images
* Fix KBD67 KLE images... again
* Add KLE links for Quefrency
* Reformat 60% layouts and KLE images
* Move Super key back to right half of Lily58
* Move Lily58 ins/del out of the way of numbers
* Fix bottom row of Lily58 KLE image
* Initialize ergodash rev 1 keymap
./util/new_keymap.sh ergodash/rev1 yet-another-developer
* Add user space configurations referenced from drashna
* Start community layout for ergodash in ortho_5x14
* Remove unused layers
* Add userspace layers
* Add Userspace gitignore
Hide Secrets
* Remove userspace unused drashna features
* Scrap default keymap and follow drashna's template
* Add code referenced from kuchosauronad0
* Make sure that the author is named Developer
* Replace middle keys del and bksp with curly brace
* Reduce ONESHOT_TIMEOUT from 3sec to 2sec
* Remove adjust key AG_SWAP
* Disable UNICODEMAP_ENABLE, remove code causing build fail
* Increase TAPPING_TERM to 240
Reason: Because Space is also LOWER, space sometimes not registering.
PS: I dont want to #define RETRO_TAPPING yet
* Update KC_MAKE to use :flash
* Remove TAP_ONCE, use tap_code
Signed-off-by: Developer <anotherdeveloper@icloud.com>
* Remove redundant code implementation of keyboard_post_init_user
https://github.com/qmk/qmk_firmware/pull/7046
users/yet-another-developer/leader.c
```
static bool has_ran_yet;
if (!has_ran_yet) {
has_ran_yet = true;
startup_user();
```
Comment for lines +11 – +14
@drashna: Not needed anymore. You can use keyboard_post_init_user now.
Signed-off-by: Developer <anotherdeveloper@icloud.com>
* Change RGBLight pin for Planck Light
Move it to A0, so that the SPI? pins are available for BT hackery
* Add QMK DFU bootloader info
* Add Solenoid
* Disable annoying white LED on bottom
* Enable Solenoid on Corne
* Remove bounds for animations
* Increase debounce for Ergodox EZ to reduce repeat key issues
* Set swap hands key to be a hold-tap key
This way, it's not ANNOYING and doesn't swap the hands inteniontally
* Move MT Alt in Corne keymap
* Re-Add fine tuned control of secrets
* Squash mods to single row
* Add LRA settings to haptic feedback settings for Rev6
* Fix issue with non-Planck EZ keymaps
* Add 40 Percent Nano with Analog Joystick
* Add Collide39 keymap
* Fix OLED printing to be more flavorful
* Fix up Iris GamePad and come cleanup
* Expand OLED char map further
* Add modded characters to keylogger
* Here be dragons
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix up rules for community layouts
* Some more OLED tweaks
* Add mod mask check function
* Change QMK DFU Audio pin to be correct
* Use manual STM config instead of CTPC for Collide 39
* Port personal keymap to 60_tsangan_hhkb
- add 60_tsangan_hhkb layout to plain60
- Fix bug in split rs in plain60
- use community and user based layout for 60_tsangan_hhkb
- set up audio for plain60 only
* Add LAYOUT_60_ansi_split_bs_rshift
* readme updates for 60_ansi and split variations
* add new community layout for mechmerlin for the new default layout 65_ansi_blocker
* change path now that kbd67 has been updated
* fix up spacing
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support and remove uneeded lines of code
* rename LAYOUT to LAYOUT_65_blocker_ansi
* rename LAYOUT macro
* enable LAYOUT_65_blocker_ansi community layout support
* enable LAYOUT_65_blocker_ansi support
* fix rename mess up
* add QMK Configurator support with the new rename
* rename blocker_ansi to ansi_blocker as it rolls off the tongue easier
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Switch Quefrency back to I2C (#6161 fixes the lag)
* Update Quefrency keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update KBD67 keymap
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Move Menu to a layer tap on the Fn key since that's a more natural
location.
* Update 60% Tsangan HHKB layout
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Update 60% ANSI split backspace/right-shift layout
* Add reset and EEPROM reset keybindings so these tasks can be performed
separately, rather than relying on Bootmagic Lite, which performs both
tasks at the same time.
* Move Caps Lock from Fn+Ctrl to Fn+Tab since Fn+Ctrl is sometimes used
as part of a more complex keybinding, whereas Fn+Tab is always safe.
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* Add support for XD004
Also applying the following suggested edits:
Add hardware availability link in readme
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Enable lite bootmagic
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Remove commented out MCU
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add more ellaborate keymap
Correcting usage of tap_code_16 for modified key, thanks to @drashna
* Add information about bootloader type
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Add 60_ansi_split_bs_rshift layout to DZ60
I know there's already a lot of DZ60 layout macros, and #4668 suggests
they should be refactored at some point, but since this is one of the
standard layouts already in QMK that this PCB supports, I figured it was
okay to add so that DZ60 keyboards can share this layout with other
keyboards.
* New 60% ANSI split backspace/right-shift layout
I'm using this on a DZ60, but it should work fine on most 60% PCBs. It's
basically a HHKB layout with a standard ANSI bottom row (3x 1.25U mods,
6.25U spacebar, 4x 1.25U mods).
* [Keymap] iris@nstickney: improve RGB init
Perfecting the rgb backlight initialization with a delay for each
color; also start and stop the animation at the "default layer"
color.
* [Keymap] iris,ergodox@nstickney fix FN on SYMB
The function key was not operational on the SYMB and SYSH layers due
to other keycodes being mapped over MO() on those layers. The
offending keycodes have been moved to other keys.
* [Keymap] add @nstickney's userspace
Pulled common code out to a userspace directory for my iris and
ergodox keymaps.
* [Keymap] iris@nstickney add image to README
Added an image from keyboard-layout-editor.com to meet the README
standard.
* iris@nstickney hue values now `uint8_t` (#6050)
* Re-enable Audio
And there was much rejoicingmake keebio/iris/rev2:drashna AUDIO_ENABLE=yes!
* Re-add debounce to ergodox EZ
* Fix rgb matrix helper function
* Make sure that RGM Matrix is checked properly
* Fix merge commit?
* Disable more RGB matrix modes
* Increase Debounce for Ergodox EZ
The performance improvements have made it necessary, actually
* Consolidate RGB Matrix layer indication function
And changes to iris
* Fix lighting issue for gamepad
* Update Corne Keyboard configuration
* Update Corne Keyboard layout
* Update KC_MAKE macro to better handle crkbd split
* Tweaks to Corne Keyboard Layout
* Enable RGB Matrix Sleep
* Update my code to use layer_state_t typedef
* Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature.
* Tweaking my community keymap to work better with my rev 4 planck.
This is a Neo2 inspired layout that is meant to be fully usable on
MacOS when used with the default US QWERTY/ABC Extended keymap.
Neo2 layers 1-4 have been almost fully implemented in hardware.
Layers 5 and 6 (greek and mathematical symbols) have been left
out for now as most of them aren't available on the default
keymaps.
Layer toggling for layer 3 on the right hand side utilizes a
tap-toggle approach that is a combination of MO & LT macros.
This is required to allow sending Y when tapped, @ when tapped
while the SHIFT modifier is active and support momentarily
toggling the layer while the key is held.
* trying to make my global keymap
* refactoring the old keymap using userspace
* getting there
* move readme and remove community layout
* use pragma once instead of ifndefs
* just make iris work
* iris decent
* better naming
* add some modifiers on the home row
* use symbol and sysctl layers
* fix up
* a bit faster
* add < and > on symbol layer
* apparently im not using z all that much..
* okok
* fix up stuff
* led init is back
* bring back led indicators
* Update keyboards/ergotravel/keymaps/pvinis/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* not needed
* not needed
* delete these for now, until I use the userspace code
* remove katamari from here. made a new pr for it
* lower case
* drashna suggestion :)
* move files to correct place
* fix missing command
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Initial conversion of the rgb_led struct
* Converting last keyboard & updating effects to take advantage of the new structure
* New struct should not be const
* Updated docs
* Changing define ___ for no led to NO_LED
* Missed converting some keymap usages of the old struct layout
* Disable a bunch of reactive modes
* Enable rgb matrix for Corne Keyboard
* Convert CRKBD to rgb matrix
* Add Gergo keyboard layout
* Make Diablo 3 tap dance better
* Add basic support for Planck EZ
* Fix RGB Matrix stuff
* Fix keycodes for Planck EZ
* Update CRKBD OLED stuff
* Fix typo for sleep on ergodox glow
* Improve my gergo layout
* Scrolling OLED key logger!
* Change gergo layout
* Hnadle unicode keycodes if unicode is disabled
* Disable COMMAND/CONSOLE for gergo
* Fix right side control
* Re-enable LTO for all platforms
Since I got updated arm gcc binaries that no longer error out on lto
* Update formatting to match newer community standards
Poor 2 space
* Re-alight startup animation to use new HUE range
* Streamline gitlab ci scripts
* Disabled Space Cadet
* Add support for breathing table
* Enable new LTO Option
And clean up defines that will now be repeatitive
* Remove vscode settings
* Additional formatting cleanup of config.h files
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
The other bépo layouts were a bit too complex/weird or without LED code
and hard to transition to for new users. This config is a good base for
bépo users.
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* Add keycodes for new macros to keymaps
* add macros for commonly used shortcuts
* FIx macro code and add comments
* Replaced with build in QMK keycodes
* Removed macros that duplicated QMK keycodes
* Add support for wiring RGB LEDs for both halves directly to their respective controllers
RGB LEDs for each half don't need to be chained together across the TRRS cable with this
* Add split RGB LED support for serial
* Update config/rules for bakingpy layout
* Un-nest ifdefs for hand detection
* Read RGB config state from memory instead of EEPROM for serial updates
* Reuse existing LED pointer instead of creating new one
* Adding new tap dance key
* Adding new tap dance code
* add code for copy/paste to tap dance
* testing tap dance enums
* New tap dance keycodes
* Fix enums
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* Add keycode for KC_MAKE
* Add KC_MAKE keycode
* Add stanrc85.c file with KC_MAKE
* Remove unused include
* Improved KC_MAKE stolen from Drashna
* Define mod mask for new KC_MAKE code
* RESET board to flash after compiling
* Remove send_string
* RESET fixed in KC_MAKE
* enable velocikey for my userspace and explicitly for my 75% layout
* add guards to only turn on RGB stuff if the RGB pin is actually defined
* update 60_ansi keymap
* update the 60_ansi_split_bs_rshift keymap
* update 66_ansi keymap
* update docs
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/66_ansi/mechmerlin/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* remove my attempt to find a good way to detect this
* move audio clicky into user space and do feature setting per keyboard
* fixup 66_ansi keymap
* update changelog
* update readme
* Convert community layout to userspace for future use
* Big readme update
* Move layer toggle to CAPS
* Readme updates
* Deleted since unused
* Removed call to unused .c file
