* Clean up `DEBOUNCE` in config.h, 0-9
* Clean up `DEBOUNCE` in config.h, A
* Clean up `DEBOUNCE` in config.h, B
* Clean up `DEBOUNCE` in config.h, C
* Clean up `DEBOUNCE` in config.h, D
* Clean up `DEBOUNCE` in config.h, E
* Clean up `DEBOUNCE` in config.h, F
* Clean up `DEBOUNCE` in config.h, G
* Clean up `DEBOUNCE` in config.h, H
* Clean up `DEBOUNCE` in config.h, handwired
* Clean up `DEBOUNCE` in config.h, I
* Clean up `DEBOUNCE` in config.h, J
* Clean up `DEBOUNCE` in config.h, K
* Clean up `DEBOUNCE` in config.h, L
* Clean up `DEBOUNCE` in config.h, M
* Clean up `DEBOUNCE` in config.h, N
* Clean up `DEBOUNCE` in config.h, O
* Clean up `DEBOUNCE` in config.h, P
* Clean up `DEBOUNCE` in config.h, Q
* Clean up `DEBOUNCE` in config.h, R
* Clean up `DEBOUNCE` in config.h, S
* Clean up `DEBOUNCE` in config.h, T
* Clean up `DEBOUNCE` in config.h, U
* Clean up `DEBOUNCE` in config.h, V
* Clean up `DEBOUNCE` in config.h, W
* Clean up `DEBOUNCE` in config.h, X
* Clean up `DEBOUNCE` in config.h, Y
* Clean up `DEBOUNCE` in config.h, Z
* Remove default debounce from info.json
* Migrate non-default debounce to info.json
User reported that CAPS lock Led state was inverted after soldering a LED to their board.
LED_PIN_ON_STATE defaults to 1, so just swap to low.
Flashed board and now CAPS LED reflects the actual state
* m65hi_alpha.h: add matrix diagram
* rename LAYOUT_all to LAYOUT_65_iso_blocker
* add LAYOUT_65_iso_blocker_tsangan
* tidy-up keymaps
- use four-space indent
- polish keycode grid alignment
* touch-up keymaps
Switch one Page Down keycode for Page Up on the `default` keymap, and switch the Page Down and Page Up keycodes on the `via` keymap.
* m75s.h: correct matrix position identifier
`K5C` is actually on row 4, so it should be `K4C`.
* m75s.h: add matrix diagram
* add QMK Configurator data
* polish whitespace
- convert tabs to spaces
- update indent to four spaces
- remove trailing whitespace
* update readme
Didn't seem to be fully updated after being copied from the M65S codebase.
* add LAYOUT_ansi with keymap
ANSI layout with 2u Backspace.
* add LAYOUT_iso with keymap
ISO layout with 2u Backspace.
* add LAYOUT_ansi_tsangan with keymap
ANSI layout with 2u Backspace and 7u Spacebar.
* add LAYOUT_iso_tsangan with keymap
ISO layout with 2u Backspace and 7u Spacebar.
* add LAYOUT_ansi_split_bs with keymap
ANSI layout with Split Backspace.
* add LAYOUT_iso_split_bs with keymap
ISO layout with Split Backspace.
* add LAYOUT_ansi_tsangan_split_bs with keymap
ANSI layout with Split Backspace and 7u Spacebar.
* add LAYOUT_iso_tsangan_split_bs with keymap
ISO layout with Split Backspace and 7u Spacebar.
* m75h.h: correct matrix position identifier
`K5C` is actually on row 4, so it should be `K4C`.
* m75h.h: add matrix diagram
* add QMK Configurator data
* polish whitespace
- convert tabs to spaces
- update indent to four spaces
- remove trailing whitespace
* Initial M75H support
* Remove BSLS key
* Add M75S initial support
* Define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR to allow VIA
* Add layer 1 for M75H
* Add layer 1 for M75H
* Fix layouts
* Add BOOTLOADER and remove BOOTLOADER address from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add Configurator data
* rename README.md to lowercase
API can't find this file unless the filename is lowercase (`readme.md`).
* readme touch-up
Correct typos and improve some grammar and Markdown.
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
* Set bootloader to stm32-dfu for STM32F303
* Set bootloader to stm32-dfu for STM32F0x2
* Set bootloader to stm32-dfu for STM32F4x1
* Set bootloader to stm32duino for sowbug
* Delete redundant bootloader_defs headers
* Add some missing MCU name comments
* Move APM32 dfu-suffix overrides underneath bootloader
* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
* Add default mode eighty firmware
* Add via keymap
* Mode80 firmware upgrades
- Removed SPI and PWM drivers from MCU configuration, HAL configuration and Chibi configuration as neither peripherals are being used
- Included second backspace key (row 5, col 14) which should solve the non-appearance of the backspace key on the hotswap PCB
* Add default mode eighty firmware
* Add via keymap
* Update keyboards/mode/eighty/config.h
Remove comment lines from config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mode/eighty/config.h
Remove comments from config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update eighty.c
Add GPLv2 header
* Update eighty.h
Add GPLv2 license header
* Update readme.md
Update README
* Update keyboards/mode/eighty/config.h
Remove keyboard description
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Delete config.h
Delete config.h in keynap folder
* Update keyboards/mode/eighty/rules.mk
Remove feature disabling in rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Move rules.mk to VIA folder
* Update keyboards/mode/eighty/keymaps/via/rules.mk
Use LTO_ENABLE as short for LINK_TIME_OPTIMIZATION_ENABLE
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mode/eighty/readme.md
Puts a single image embedded in the readme, and links to the full gallery
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mode/eighty/readme.md
Use * for markdown list
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Correct comment characters
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adjusted copyright name, USB descriptor and removed info.json
* Separate Mode80 S and H firwares into subfolders
* Added info.json files for QMK Configurator
* Lowercase folder and filenames
* Remove config definition macros in M80H
* Remove config definition macros in M80S and root
* Change definitions to lowercase parameters
* Moce chconf and mcuconf chibiOS files to root folder
* Move halconf to root folder, keymaps to subfolders
* Update readme for building/flashing guide
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add layers to VIA keymaps, remove CONSOLE_ENABLE
* Push master changes to lib/
* Retrieve lufa and googletest submodules to previous heads at master
* Disabled LTO in VIA keymaps
* Fix layout declaration to lowercase in m80s default keymap
* Added readme's for each M80S and M80H
Co-authored-by: Jaicob <jaicob@icloud.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
