* Turn off more unnecessary features by default
* Double TAP_CODE_DELAY due to more media key issues
Even with this change, some of the rotary encoder turns on my BDN9's
volume knob still seem to get dropped. It's possible there's something
wrong with the encoder itself. (Maybe the TAP_CODE_DELAY actually causes
QMK to miss an encoder turn? Unclear.) The other knob (backlight
brightness) works fine, FWIW....
* Restructure userspace config.h a bit
* Hack around Instant60 Via EEPROM conflict
Remove this when #6589 is fixed for Via boards.
* Add backlight breathing and (EEPROM) reset to BDN9
* Add keymap for 9-Key macropad
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Add missing void parameter declarations to *_light functions
* Add doro67/multi:konstantin keymap
* Allow FNLK to be canceled with Esc
* Function layer → Fn layer in keymap comments
* Enable Fn layer tap dances only if LAYER_FN is defined
* Update KBD6X keymap spacing to match LAYOUT spacing
* Add regular FNLK to userspace, update keymap comment labels
* Rename KC_BRK → BREAK, KC_SYSR → SYSRQ in userspace
* Change mousekey positions in KBD6X
* Disable Console in KBD6X to reduce firmware size
* Return false in process_record_* only when overriding existing keys
* Fix Caps light not working after LSFT_FN
* Refactor Fn/Caps light, fix sequencing issues
* added combos
* minor adjustments, added combos
* Add second encoder, add modifiers to encoders
Added a skeleton for the possibily having a second encoder.
Added 9 modifiers for the first rotary encoder:
- None
General navigation. Page up/down
- SHIFT
Fast navigation. Home/end
- CTRL
Vertical navigation. Up/down
- CTRL+SHIFT
Horizontal navigation. Left/right
- ALT
Audio volume control.
- GUI
Browser navigation(windows). Forward/backward
- ALT+SHIFT
Form navigation. Tab up/down
- ALT+CTRL
Media control. (Play|pause)/mute
- HYPER
Media navigation. Next/prev track
Key codes are stored in `uint16_t encoder_actions[2][9]`
* Add second encoder, add modifiers to encoders
Added a skeleton for the possibily having a second encoder.
Added 9 modifiers for the first rotary encoder:
- None
General navigation. Page up/down
- SHIFT
Fast navigation. Home/end
- CTRL
Vertical navigation. Up/down
- CTRL+SHIFT
Horizontal navigation. Left/right
- ALT
Audio volume control.
- GUI
Browser navigation(windows). Forward/backward
- ALT+SHIFT
Form navigation. Tab up/down
- ALT+CTRL
Media control. (Play|pause)/mute
- HYPER
Media navigation. Next/prev track
Key codes are stored in `uint16_t encoder_actions[2][9]`
* Clean up; added combos
Combos:
- CV: Copy
- XC: Cut
- ZV: Paste
- QP: KC_SLEEP
* Fix LEADER_DICTIONARY to be more useful
* Add documentation
* Minor fixes
* Raise TAPPING_TERM
* testing
* Rearrange modifiers
* Fix kc being stored in uint8 instead of uint16
* Update documentation
* Clean up
* Remove excess comments
* Put encoder_actions in progmem
* add Userspace and keymaps
* Adding keymaps for zeal60 and iris
* Created my own tap dance that toggles RGB Mode based on whether I toggled caps lock or not
* parent 578ed42a7f8f986147cad040d50d4ae1d24a32e2
author Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
committer Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500
move to userspace
add zeal60
* update based on review
* move userspace to github name
* Update MODERN_DOLCH_RED color
* Remove unused RAL_LAL tap dance
* Disable Space Cadet on all boards
* Rework SEND_STRING_CLEAN into CLEAN_MODS, fix DST_P_R/DST_N_A
* Disable unnecessary underglow animations
* Rearrange feature flags in rules.mk files
* Change custom colors from structs to defines
* Add some explicit initializers
* Add MODERN_DOLCH_CYAN color
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add led_set_keymap() template function
* Change underglow color based on Caps/Fn state
* Preserve val when changing underglow colors
* Only trigger Fn light for Fn layer
* Refactor fn_light() and caps_light() slightly
* Add comments to fn_light() and caps_light()
* Xulkal changes
Refactor rgb & encoder menu
Hadron Keymap
Refactor oled menu
* Fixing horizontal OLED data display
* Reverting changes to take to separate prs
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* Basic Rev 2 implementation
* Updated LED defines and added Extra encoder support
* Fixed rgb pin assignment
* Physically accurate LED positions
* Single Color Band scrolling left to right effects
* Spirals, Pinwheels, and Documentation....Oh My!
* Spiral effect band thickness adjustments
* Fixing animation spin directions
* Full hand LED positions
* Basic Rev 2 implementation
Updated LED defines and added Extra encoder support
Fixed rgb pin assignment
Physically accurate LED positions
Full hand LED positions
Moving rev2 folder
* RGB Center Point LED position update
* Fixing led config commas
* Fixing led config commas
* fix enter key
* fix enter
* Small changes to default
* update default
* typo fix
* update default
* Fixing defines & led config, turned full hand & extra encoders into rules.mk feature
* Refactored rules.mk to have a post_rules.mk
* Forgot to offset the matrix to led map due to the edge led additions
* Updated LED flags and fixed my keymap
* Update keymap.c
include speed controls for RGB
* Fixing more rules.mk and adding keymap like encoders functionality
* Sol Rev 2 Implementation
* Minor fixes
* Keymap fixes
* Fix Colemak, add lock keys
Zeroing out spd in eeconfig_init_quantum
Switched to block read & update
Update tmk_core/common/eeconfig.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Fixing init compile error
Update eeconfig.c
Dead / Missing API cleanup
alignment
* Add missing TD_RSF_RCT tap dance
* Use standard QMK HSV and RGB structs, fix Godspeed colors
* Move PROGMEM after the type in RGB intervals
* Add MODERN_DOLCH_RED color, use it on KBD6X
* Use 255 instead of RGBLIGHT_LIMIT_VAL in color definitions
* Remove IS_COMMAND override on Whitefox
* Add wasdat:konstantin keymap
TODO: Move it to layouts/
* Use HHKB arrow arrangement for mouse keys on KBD6X
* Move KC_APP from Ctrl to M on all boards
* Use RCT_RSF on Melody96
* Set TAP_HOLD_CAPS_DELAY to 50 in userspace
* Use RSF_RCT instead of RCT_RSF
* changes to keymaps
* changes to userspace
* changes to userspace
* removed reference to fc660c keymap which no longer exists from userspace readme
* removed preonic keymap
* Fix typo for RGBLIGHT config values
It doesn't make a difference right now since these are the defaults in
rgblight.h (which I'm just setting explicitly since some of the keyboard
configs change these defaults). However, I'd rather be explicit, so
fixing my typo. :)
* Remove mouse keys layer from Quefrency keymap
It's a fun idea, but I never use it in practice.
A delay of 10ms seems sufficient. Otherwise, media keys tapped from the
encoder of my BDN9 macropad only seem to get picked up by the OS
(Windows 10) some of the time.
* [Keymap] iris@nstickney: improve RGB init
Perfecting the rgb backlight initialization with a delay for each
color; also start and stop the animation at the "default layer"
color.
* [Keymap] iris,ergodox@nstickney fix FN on SYMB
The function key was not operational on the SYMB and SYSH layers due
to other keycodes being mapped over MO() on those layers. The
offending keycodes have been moved to other keys.
* [Keymap] add @nstickney's userspace
Pulled common code out to a userspace directory for my iris and
ergodox keymaps.
* [Keymap] iris@nstickney add image to README
Added an image from keyboard-layout-editor.com to meet the README
standard.
* iris@nstickney hue values now `uint8_t` (#6050)
* feat-user-kuatsure: abstract symbol row out
* feat-user-kuatsure: abstract grouped bracket, brace, paren out
* fix-preonic-kuatsure: remove eol as requested by @drashna
* feat-user-kuatsure: add KC_MAKE and KC_FLSH
thanks to @drashna for the help
* chore-preonic-kuatsure: remove auto shift
* chore-user-kuatsure: move leader seq's to macro syntax
* feat-user-kuatsure: add `KC_VRSN` key
plus use it preonic keymap
* chore-user-kuatsure: namespace keyboard macros `KB`
* chore-preonic-kuatsure: move some keyboardy keys around
* chore-preonic-kuatsure: remove parens, brackets, braces from lower
* chore-user-kuatsure: move tmux window shifts to dbl press leaders
* feat-user-kuatsure: add a computer lock leader seq
* fix-preonic-kuatsure: go back to lower brackets
* chore-preonic-kuatsure: clear out raise
* feat-various-kuatsure: add meh + tab mod tap
* chore-preonic-kuatsure: `raise` eats `game_mod` layer
* fix-preonic-kuatsure: reverse pg up and pg down
* chore-user-kuatsure: add double tap to turn off music
* chore-user-kuatsure: move like seqs together
* chore-preonic-kuatsure: add a few more items to the num pad on raise
* feat-user-kuatsure: re-enable td for <> keys
* chore-user-kuatsure: give a little more grace period for leader
* fix-user-kuatsure: give lock leader a gui buffer
no timer or anything, but alfred doesn't boot up as quickly as I would like sometimes
gui doesn't do anything but gives a little bit of a time bump
* fix-user-kuatsure: changes from @drashna review
* Switch Quefrency from flaky I2C back to serial
* Lower mouse wheel speed on Quefrency slightly
* Migrate common settings to userspace
* Enable Bootmagic Lite for consistent reset to bootloader.
* Turn off some undesired features across all keyboards.
* Remove EEPROM reset keybinding from all keyboards since Bootmagic Lite
also does an EEPROM reset.
* Set backlight and underglow increments consistently across all
keyboards since lots of them like to override the deafults.
* Set mouse keys consistently across all keyboards.
* Update function layer keymap images
* Re-enable Audio
And there was much rejoicingmake keebio/iris/rev2:drashna AUDIO_ENABLE=yes!
* Re-add debounce to ergodox EZ
* Fix rgb matrix helper function
* Make sure that RGM Matrix is checked properly
* Fix merge commit?
* Disable more RGB matrix modes
* Increase Debounce for Ergodox EZ
The performance improvements have made it necessary, actually
* Consolidate RGB Matrix layer indication function
And changes to iris
* Fix lighting issue for gamepad
* Update Corne Keyboard configuration
* Update Corne Keyboard layout
* Update KC_MAKE macro to better handle crkbd split
* Tweaks to Corne Keyboard Layout
* Enable RGB Matrix Sleep
* Update my code to use layer_state_t typedef
* trying to make my global keymap
* refactoring the old keymap using userspace
* getting there
* move readme and remove community layout
* use pragma once instead of ifndefs
* just make iris work
* iris decent
* better naming
* add some modifiers on the home row
* use symbol and sysctl layers
* fix up
* a bit faster
* add < and > on symbol layer
* apparently im not using z all that much..
* okok
* fix up stuff
* led init is back
* bring back led indicators
* Update keyboards/ergotravel/keymaps/pvinis/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* not needed
* not needed
* delete these for now, until I use the userspace code
* remove katamari from here. made a new pr for it
* lower case
* drashna suggestion :)
* move files to correct place
* fix missing command
* Initial Zygomorph 5x6 code
Split is not working yet
* layout changes
implement 4 row config option (not done yet), remove layout comments in layout.c
* Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6
Also, info.json *should* be nearly usable
for the configurator
* temporary fix for pin D5 being broken
* show D5 issue comment
* add build notes
* Pin B7 broken in split why?
* remove fix
* Fix some pin assignments
* begin to fix keymap
* Create new 5x6 layout
* update key positions
* Initial Zygomorph 5x6 code
Split is not working yet
* layout changes
implement 4 row config option (not done yet), remove layout comments in layout.c
* Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6
Also, info.json *should* be nearly usable
for the configurator
* temporary fix for pin D5 being broken
* show D5 issue comment
* add build notes
* Pin B7 broken in split why?
* remove fix
* Fix some pin assignments
* begin to fix keymap
* Create new 5x6 layout
* Rough first pass at split common conversion.
Keymap cleanup to cover just the basics.
Broke OLED code out into separate example.
* Fix readme
* Removal of old encoder / oled driver, fix for layout macros
* small update
* xulkal zygomorph keymaps
* Removed the LED_MIRRORED option as leds are always mirrored on Zygomorph
* Xulkal keymaps update
* split rgb light support
* fix line endings
* Apply suggestions from code review
Co-Authored-By: zvecr <git@zvecr.com>
* More layout and compile fixes from pr review
* Cleaning up rules.mk files
* Apply suggestions from code review
Co-Authored-By: zvecr <git@zvecr.com>
* Updating defaults
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Disable a bunch of reactive modes
* Enable rgb matrix for Corne Keyboard
* Convert CRKBD to rgb matrix
* Add Gergo keyboard layout
* Make Diablo 3 tap dance better
* Add basic support for Planck EZ
* Fix RGB Matrix stuff
* Fix keycodes for Planck EZ
* Update CRKBD OLED stuff
* Fix typo for sleep on ergodox glow
* Improve my gergo layout
* Scrolling OLED key logger!
* Change gergo layout
* Hnadle unicode keycodes if unicode is disabled
* Disable COMMAND/CONSOLE for gergo
* Fix right side control
* Re-enable LTO for all platforms
Since I got updated arm gcc binaries that no longer error out on lto
* Update formatting to match newer community standards
Poor 2 space
* Re-alight startup animation to use new HUE range
* Streamline gitlab ci scripts
* Disabled Space Cadet
* Add support for breathing table
* Enable new LTO Option
And clean up defines that will now be repeatitive
* Remove vscode settings
* Additional formatting cleanup of config.h files
* Add FnLk to Melody96 bottom row
* Update conditional in userspace makefile
Thanks @drashna
* Add F keys to Melody96 Fn layer
* Add FN_ESC alias to userspace
* Update KBD6X keymap
* Fix RGB_MATRIX_ENABLE constant name in #if
* Remove trailing \ from LAYOUT macro calls
* Set RGB mode on EEPROM reset in KBD6X
* Swap right and middle mouse buttons in KBD6X
* Rearrange RGB controls in KBD6X
* Update keycode aliases, replace CLEAR with DEL_NXT in KBD6X
Add Clear to KBD6X as RCtrl+`
* Convert code to 4 space indents
* Tweak RCTRL layer functionality
* Replace NUMPAD custom keycode with layer state logic
* Update RGB_MATRIX_ENABLE check
Co-Authored-By: vomindoraan <vomindoraan@gmail.com>
* Expose unicode_saved_mods
* Add UNICODEMAP shift pair functionality and XS keycode
* Add XS to keycode reference documentation
* Pick pair index based on both Shift and Caps Lock state
* Add XS to Unicode feature docs
* Clean up process_unicode* headers
* Extract unicode_map index calculation into function
* Pick pair index as XOR rather than OR of Shift and Caps states
* unicode_input_start() has to be called before the unicode_map index is calculated
* Replace unicodemap_input_error() with more generic unicode_input_cancel()
* Replace register+tap+unregister with tap_code16(LCTL(LSFT(KC_U)))
* UNICODE_OSX_KEY → UNICODE_KEY_OSX, UNICODE_WINC_KEY → UNICODE_KEY_WINC
* Make keycode range checks more robust
* Fix keycode range checks for different input modes
* Add UNICODE_KEY_LNX, update docs
* QK_UNICODEMAP_SHIFT → QK_UNICODEMAP_PAIR
* XS → XP, update docs
* Tweak Unicode docs
* Use recently added MOD_MASK_SHIFT and IS_HOST_LED_ON helpers
* Update Unicode table in docs/keycodes.md
* Update Unicode docs per review comments
* Replace references to Mac OS X with macOS in Unicode docs
* As of v0.9.0, WinCompose supports all possible code points
* Expand descriptions in XP docs
* Update keycode table and cycling docs
* Further expand cycling docs
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* Add keycodes for new macros to keymaps
* add macros for commonly used shortcuts
* FIx macro code and add comments
* Replaced with build in QMK keycodes
* Removed macros that duplicated QMK keycodes
* Adding new tap dance key
* Adding new tap dance code
* add code for copy/paste to tap dance
* testing tap dance enums
* New tap dance keycodes
* Fix enums
* fresh commit for a new fork for PR to upstream/master
* gaming mode added, lighting changes for other modes
* rules.mk fixed...
* fixed collision issue with aesthetic and shifty modes
* fixed collision issue with aesthetic and shifty modes
* troubleshooting game mode failing
* moved game tapdance key to default layer, fixed issue
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
* Userspace update
* Add keycode for KC_MAKE
* Add KC_MAKE keycode
* Add stanrc85.c file with KC_MAKE
* Remove unused include
* Improved KC_MAKE stolen from Drashna
* Define mod mask for new KC_MAKE code
* RESET board to flash after compiling
* Remove send_string
* RESET fixed in KC_MAKE
* Change how desktop commands work
* Add DST_MOD_MASK as a config option
* DST_RMV → DST_REM
* Add melody96:konstantin keymap
* Update custom SEND_STRING
* Move feature flags from userspace into keyboard rules
* Use "Vo-", "Vo+" instead of "VoD", "VoU" in keymap comments
* Add RGB controls and numpad Unicode to Melody96 keymap
* Add RGB_SET keycode to Melody96 and RGB files to userspace
* Generate UNICODE and UNICODEMAP constants using macros
* Avoid collisions with X_* send string constants
* Use two spaces before inline comments
* Add _keymap versions of other custom Quantum functions
Not added: eeconfig_update_keymap, eeconfig_read_keymap
* Switch to UNICODEMAP in keyboard rules
* Make toggle_numpad a nested function in process_record_user
* Set Melody96 underglow color to Godspeed blue on EEPROM reset
* Remove most _keymap and _user definitions in userspace
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Update GODSPEED_BLUE values and RGB mode keys
* Add GODSPEED_YELLOW color
* Set preferred intervals for rgblight effects
* Update tap dance function names
* Replace td_lshift_fn with generic td_mod_layer, add TD_RCTL_FN
Move TD_FN_RCTL after TD_RCTL_FN
* Replace td_fn_rctrl with generic td_layer_mod
* Add blank lines, prefer explicit initialization
* ACTION_TAP_DANCE_DOUBLE_MODS → ACTION_TAP_DANCE_DOUBLE_MOD
* Update Godspeed colors
* Add media controls to Melody96 keymap
* Add SysRq, Break combos and other keys to Melody96 keymap
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
* Some revs to my keymapping
* Add {}
* Add PGUP/PGDN
* Shifted some middle-range keys around
* Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer
* Wanted ~
* cbbrowne hasn't anything to do with hadron keymaps
* trim unneeded bits
* I prefer OrgMode for my notes
* Have a right-alt
* Layer keys make LED colors change
* Add sample user rules for cbbrowne
* Add source of xd75 rules
* Individualized xd75 rules
* Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard
* Add INSERT and EEP_RST to HS60 keymap
* Add INSERT to keymap
* Layer based RGB colors
* Move RGB code to layer_rgb.c
* New file with layer based RGB colors
* Use RGB code if RGBLIGHT is enabled
* Set RGB options in config.h
* Remove rgb enable from init user
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Removed since options are in userspace
* Removed RGB option that was breaking one of my builds
* Remove unused options
* Removed options present in userspace, add board specific options here
* Removed code also present in userspace
* Turns out those lines were needed, added them back
* Testing changes
* Added code to ensure board read as ANSI instead of default ISO for HS60
* Setting \ key to "MOD" instead of "ALPHA" for lighting
* enable velocikey for my userspace and explicitly for my 75% layout
* add guards to only turn on RGB stuff if the RGB pin is actually defined
* update 60_ansi keymap
* update the 60_ansi_split_bs_rshift keymap
* update 66_ansi keymap
* update docs
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/66_ansi/mechmerlin/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update layouts/community/60_ansi/mechmerlin-ansi/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* remove my attempt to find a good way to detect this
* move audio clicky into user space and do feature setting per keyboard
* fixup 66_ansi keymap
* update changelog
* update readme
* Convert community layout to userspace for future use
* Big readme update
* Move layer toggle to CAPS
* Readme updates
* Deleted since unused
* Removed call to unused .c file
* Change Command keycode defaults to match corresponding Bootmagic codes
* Make alternate magic key keycodes consistent
* Reflect changes from previous commit in tmk_core/common/command.c
* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes
* Swap E and BSPACE for MAGIC_KEY_EEPROM
* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT
* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff
* Update Command descriptions
* Remove duplicated or unnecessary definitions in config.h and rules.mk
* Use IS_HOST_LED_ON() macro
* Add mouse acceleration to kbd6x:konstantin keymap
* Clear and restore mods when sending macros
* Make SEND_STRING_CLEAN a config option
* Add NO_ACTION_ONESHOT to userspace config
* Add kbd6x:konstantin keymap
* Prevent tap dance from sending LShift as a weak mod in KBD6X
* Move config.h and rules.mk definitions into userspace
* Add UC_WIN to UNICODE_SELECTED_MODES
* Temporarily use Bootmagic until Command is fixed
* Move common behavior from keyboards into userspace
* Update kbd6x:konstantin keymap and userspace
* Make a RCTRL layer in kbd6x:konstantin
* Make KC_ESC turn off layers
* KC_ESC turns L_FN off only if it was locked on
* Add missing record->event.pressed checks
* Move numpad toggling logic into function
* Disable Bootmagic, enable KEYBOARD_SHARED_EP with Command
* changed ortho keymaps and userspace
* changed prime_o keymap
* changed userspace
* optimized keymaps and userspace
* removed permissive hold as it doesn't seem to do anything
* defined TAPPING_TERM in userspace config.h
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Use standard KC_ALGR, remove language-specific redefinitions
* Use ALGR instead of ALTGR in BÉPO and Canadian multilingual keymaps
* Remove BE_LALT, BE_LGUI aliases
* Bocaj Layout Revamp
* Pull in Upstream (#1)
* Various tweaks for some Input:Club build processes
* change KEYMAP to LAYOUT for all new keyboards made using this script
* Add support for rev3 of the Atom47 (#2672)
* Added support for rev3 of the Atom47
* Updated Atom47 readme's
* Fix redefine error on rev2 and add maartenwut's keymap
* Fix redefine error on LEdiodes keymap
* Add Nyquist keymap (#2692)
* nyquist
* danielhklein nyquist setup
* shift left controls
* remove readme
* cleanup before pr
* ready for pr
* Adds Phantom TKL support (#2696)
* Add an info.json to phantom keyboard
* Add layouts
- KEYMAP_WINKEYLESS
- KEYMAP_7BIT
- KEYMAP_ISO
- KEYMAP_ISO_WINKEYLESS
* Add key_counts
* Add 2 missing F-Row keys
* Add TKC1800 info.json
Created an info.json for the tkc1800.
* Clueboard 60 info.json
- adds
- LAYOUT_60_ansi
- LAYOUT_60_iso
- KEYMAP_AEK
- KEYMAP
- LAYOUT_60_ansi_split_bs_rshift
* Add the Speedo keyboard
* Fix KC60 info.json file (#2707)
* change KEYMAP to LAYOUT in all the KC60 files
* Redo the info.json file
* Small fixes to TKC1800
- adjust F-row to use 0.25 spacing
- split left shift
- add key_count
* Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708)
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* Improve state/chord handling and clean up namespace
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk
* Readd the kbd75 maintainer
* Remove obsolete info.json entries (#2712)
* Clean up some long-standing errors when populating the API (#2715)
* More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Normacos keymap for let's split keyboard (#2691)
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* hhkb jp personal keymap (#2698)
* Add JJ40 Cockpit personal keymap (#2713)
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718)
* add readme to ktype keyboard
* add readme to m10a
* add readme to mini1800
* add readme to parent directory
* Revert "Pull in Upstream (#1)"
This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45.
* Updates to Bocaj Files
- Gave up on Tap Dance for ' -> '
+ Added another 'Secret'
+ Add ' -> ' to the Swap Hands key
+ Add Swap Hands to the ' -> ' key
+ Made Hand Swapping a momentary toggle
- Removed Auto Shift
+ Added Layer Toggle to KC_QUOTE for the _TOOLS layer
- Disabled Tap Dance
* Merge remote-tracking branch 'upstream/master'
* Updates to Bocaj
Added Game Layers, Removed Unused Macros
* Removed 'secrets.h'
* Updates to Bocaj
Remove 'secrets'.
Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues
* Total revisioning of keymap and layout structure
* Missed readme.md file
* Bocaj - Permissive Hold setting enabled
* Switching from ErgoDox EZ centric configuration to the layout/user approach
* Bocaj - Create Userspace and Ergodox layout
* Update settings.json
* Pushing local updates
* Reverting .vscode/settings.json
* Adds pretty_osx and _win wrappers
* Utilize Windows and Mac Wrappers
* Update layouts/community/ergodox/bocaj/keymap.c
* Updates to Bocaj keymap.c
- Extended pretty_osx and pretty_win wrappers to allow modification of the bottom rows and thumb clusters.
- Fixed already wrapped layouts to align with the change
- Wrapped _NUMS and _CLICKY layers with the _osx wrapper because I main with a Mac
* Updates to Bocaj
Small documentation updates, added KC_MAKE from Drashna's layout, added KC_LOCK back to the diablo layer.
* Add LShift to _Adjust layer
* Minor changes to bocaj
Put wrappers in userspace and added RESET keycode to the Adjust layer
* Updates to Bocaj config & keymap; Fixed problem with process_leader.c
- Made lots of changes to the bocaj layout and userspace
- Pulled in latest upstream/master
- Attempted to compile with latest and found an unneccessary `break` in process_leader.c
* Bocaj - Updates to Layout and Userspace
* Adjust LEADER_TIMEOUT to 350
* Put KC_GRAVE on _ADJUST layer
* Eliminate _LOWER layer and associated definitions
* Adjusted layer indicating LEDs to match changes
* Fixed Diablo leader sequence
* Added build info leader sequence
* Got rid of obsoleted IGNORE_MOD_TAP_INTERRUPT/PERMISSIVE_HOLD/PREVENT_STUCK_MODIFIERS (may add STRICT_LAYER_RELEASE in the future)
* Remove type_traits
Not sure what in my VSCode config always brings this one in
* refactor stage 1
* Bocaj Refactor Phase II
* Made LED_2 brighter if both CTRL & GUI are being held
* Enabled unicode because I got it to work in Mac OS
* Finalized Build Info leader combination after testing in Mac OS
* Not sure why KC_D3_1 was set to ASDF if !TAP_DANCE_ENABLE. So I changed that back
* Experienced issues with `EXTRAFLAGS += -flto` using Docker in MacOS. Not sure what it does, but I don't seem to be missing anything
* Wrote obligatory readme.md files and mentioned Drashna too many times... I don't think I can actually take credit for much of anything here.
* Updates to Bocaj
Made LED changes, added LM_DFLT which is similar to the grave macro, enabled retro tapping, working on a unicode idea -- currently fails to build.
* Bocaj Refactor Phase 3 Part 2
- Continuation of implementing unicode switching based on default layer
- Slight adjustments to _DIABLO and base wrapper because LM_DFLT macro didn't function as I'd hoped
* Slight adjustment to KC_MAKE
* Make CRKBD keylogger output actually show tap keys
* check MT/LT for twinkling
* Add ortho 5x12 support for fractal keyboard
* Use newer interface for setting pins/ports
* Remove custom unicode methods
* Reomve unicode input info
* Odd rules issue
* Redefine REST note to be more pleasing
* Properly disable PM LEDs with GPIO commands
* Update gitlab CI yaml file
* Remove extra mod tap check
* Remove initial state on ergodox glow
* Rev6 Cleanup
* Fix KC_MAKE macro
* Update GitLab CI yaml file
* More GitLab CI changes
* One final GitLab CI change
* Remove unneeded unicode support
* Optimize KC_MAKE
* preonic-kuatsure: ctrl / esc in one key + hello ` again
* preonic-kuatsure: remove esc on lower
* preonic-kuatsure: programmy macros
* user-kuatsure: turn off console all the time
* preonic-kuatsure: auto shift, but only for numbers
* preonic-kuatsure: remove programmery macros
* preonic-kuatsure: move braces, parens, etc over to raise
backwards compat
move &*() on lower
* preonic-kuatsure: stop with the full rep of game layer
* Break up files to make more readable
* Add comments to ortho 4x12 layout rules.mk
* Small tweaks
* Update GitLab CI scripts
* Make ortho boards smaller
* Fix reversed bool check in layer_state_set
* Add Quefrency 65 for a friend
* Add Ergodox EZ Glow keymap
* Add RGB Matrix Code
* Further changes to rgb matrix ErgoDox EZ
* Update bjohnson keymaps
* Fix CRKBD display
* Overhaul to corne keyboard
* Narrow scope for keylogger
* Minor layout tweaks to Corne Keyboard
* additional CRKBD tweaks
* Minor tweaks to CRKBD
* Add all characters for keylogger
* Ergodox EZ Glow overhaul
* Fix Ergodox EZ Glow layer colors
* Increase Tapping Term for Corne Keyboard
* Fix unicode-ish
* Revert some changes
* Add layer specific lighting effects
* Some minor tweaks to ergodox glow config
* revert changes to ergodox files
* Update Glow readme
* Add more tapping term defines
* Fix changes
* Fix ergodox keymap
* Hopefully fix sleeping
* Disable layer indications if rgb matrix is disabled
* Add support for sleeping and rgb layer change toggle to ergodox ez glow
* Make RGB Layer Indication Great Again
* Make Unicode Great Again
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove old EEPROM Reset keycode
* Fix firmware to work with latest Wilba changes (i.e. dynamic keymap) and M60a.
* Get back RGB Backlight codes.
* More tweaks.
* Update users/talljoe/rules.mk
Co-Authored-By: Talljoe <jwasson+github@gmail.com>
* fix to prime o keymap
* changed ortho keymaps
* added some symbols to lower layer
* set lower to be a higher layer than raise
* added split layout option with center numpad to prime_o keymap
* added some gaming functionality
* added alt f4 ortho keymaps and userspace
* fixed small error
* Consistency fixes and more eeprom defaults
* Handle setting Unicode mode on eeprom reset better
* Unicode EEPROM hack
* Re-enable permissive hold and ignore mod tap
* Set unicode input mode
* More unicode stuff
* more haaaaaacks
* Attempted RGB Cleanup
* Fix compiler issue
* Add GitLab CI config for personal compiling
* Add avr gcc version to GitLab CI script
* Add rgblight init to matrix init
