mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/yushakobo/navpad/10
History
Albert Y cbabc8dbe6
[Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) 
* Replace Tapping Force Hold feature with Quick Tap Term

* Replace keyboard level TAPPING_FORCE_HOLD with QUICK_TAP_TERM 0

* Deprecate force hold in info_config.json

* Before and after quick tap term unit tests

* Quick tap unit tests iteration

* Keymap config.h correction

* Remove TAPPING_FORCE_HOLD_PER_KEY macros that were missed

* Add two more test cases for quick tap

* Replace TAPPING_FORCE_HOLD with QUICK_TAP_TERM in configs #2

* Replace TAPPING_FORCE_HOLD_PER_KEY with QUICK_TAP_TERM_PER_KEY in configs #2

* Add function declaration for get_quick_tap_term

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-12-12 16:52:22 +01:00
..
keymaps Remove legacy EEPROM clear keycodes (#18782) 2022-10-20 12:20:07 +01:00
rev0 Move keyboard USB IDs and strings to data driven, pass 2: S-Y (#18093) 2022-08-20 01:48:38 +01:00
rev1 Move keyboard USB IDs and strings to data driven, pass 2: S-Y (#18093) 2022-08-20 01:48:38 +01:00
10.c
10.h
config.h [Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) 2022-12-12 16:52:22 +01:00
info.json Move keyboard USB IDs and strings to data driven, pass 2: S-Y (#18093) 2022-08-20 01:48:38 +01:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk

readme.md

navpad 1.0

navpad_10

Useful and easy to build numpad with nav-cluster

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10:default

Flashing example for this keyboard:

make yushakobo/navpad/10:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available