History

Richard Dawe 4f087591a8 Add YMDK YMD62 ISO PCB (#23629 )		2024-04-29 18:36:32 -07:00
..
keymaps/default	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
config.h	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
halconf.h	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
info.json	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
mcuconf.h	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
readme.md	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00
rules.mk	Add YMDK YMD62 ISO PCB (#23629 )	2024-04-29 18:36:32 -07:00

readme.md

YMDK YMD62 ISO

A 60% PCB supporting the ISO layout, with hotswap sockets, backlit keys and underglow.

Keyboard Maintainer: Richard Dawe
Hardware Supported: YMD62 PCB
Hardware Availability: YMDK

Make example for this keyboard (after setting up your build environment):

make ymdk/ymd62:default

Flashing example for this keyboard:

make ymdk/ymd62:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Double-tap the reset button on the back of the PCB
Keycode in layout: Press the key mapped to QK_BOOT if it is available

Note: The device does not reconnect automatically after the QMK firmware has been flashed. Wait for the USB device to disappear after writing firmware, then unplug and re-plug it.