qmk_sweep_skeletyl/keyboards/hhkb/jp/rules.mk
James Young fced377ac0
2020 May 30 Breaking Changes Update ()
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` ()

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` ()

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` ()

* Migrate `ACTION_LAYER_MODS` to `LM()` ()

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` ()

* Convert V-USB usbdrv to a submodule ()

* Unify Tap Hold functions and documentation ()

* Changing board names to prevent confusion ()

* Move the Keyboardio Model01 to a keyboardio/ subdir ()

* Move spaceman keyboards ()

* Migrate miscellaneous `fn_actions` entries ()

* Migrate `ACTION_MODS_KEY` to chained mod keycodes ()

* Organizing my keyboards (plaid, tartan, ergoinu) ()

* Refactor Lily58 to use split_common ()

* Refactor zinc to use split_common ()

* Add a message if bin/qmk doesn't work ()

* Fix conflicting types for 'tfp_printf' ()

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup ()

* Refactor and updates to TKC1800 code ()

* Switch to qmk forks for everything ()

* audio refactor: replace deprecated PLAY_NOTE_ARRAY ()

* Audio enable corrections (2/3) ()

* Split HHKB to ANSI and JP layouts and Add VIA support for each ()

* Audio enable corrections (Part 4) ()

* Fix typo from PR7114 ()

* Augment future branch Changelogs ()

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00

69 lines
2 KiB
Makefile

# MCU name
MCU = atmega32u4
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the HHKB
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = yes # MIDI controls
# UNICODE_ENABLE = yes # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
# HHKB_RN42_ENABLE = yes # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree.
# Either uncomment the HHKB_RN42_ENABLE line above, or run make enabling the
# feature. Be sure to clean any existing build before trying to enable rn42
# support. For example:
#
# make hhkb-keymap-clean
# make hhkb-keymap-dfu HHKB_RN42_ENABLE=yes
# project specific files
SRC = matrix.c
ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
OPT_DEFS += -DHHKB_RN42_ENABLE
# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
# HHKB Alt controller.
RN42_DIR = ../rn42
SRC += serial_uart.c \
../rn42/suart.S \
../rn42/rn42.c \
../rn42/rn42_task.c \
../rn42/battery.c \
../rn42/main.c
VPATH += $(RN42_DIR)
endif
# debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
# debug-on: all
# debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
# debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
# debug-off: all