qmk_sweep_skeletyl/keyboards/bastardkb/dilemma/3x5_3/config.h
casuanoob 06b9925156
Bastard Keyboards: Add support for Dilemma v2 (3x5+3) (#22185)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Charly Delay <charly@delay.gg>
2023-12-12 01:22:59 -08:00

56 lines
1.7 KiB
C

/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
* Copyright 2023 casuanoob <casuanoob@hotmail.com> (@casuanoob)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Handedness. */
#define SPLIT_HAND_PIN GP29
#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* VBUS detection. */
#define USB_VBUS_PIN GP19
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* Cirque trackpad over SPI. */
#define SPI_DRIVER SPID0
#define SPI_SCK_PIN GP22
#define SPI_MOSI_PIN GP23
#define SPI_MISO_PIN GP20
#define POINTING_DEVICE_CS_PIN GP21
#undef CIRQUE_PINNACLE_DIAMETER_MM
#define CIRQUE_PINNACLE_DIAMETER_MM 40
/* Reset. */
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
/* RGB matrix support. */
#ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
# define RGB_DISABLE_WHEN_USB_SUSPENDED
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// Startup values.
# define RGB_MATRIX_DEFAULT_VAL 128
# define RGB_MATRIX_DEFAULT_SPD 32
#endif