114 lines
3.3 KiB
C
114 lines
3.3 KiB
C
/*
|
|
* Copyright 2017 skully <skullydazed@gmail.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
#include "config_common.h"
|
|
|
|
/* Address for jumping to bootloader on STM32 chips. */
|
|
/* It is chip dependent, the correct number can be looked up here:
|
|
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
*/
|
|
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
// #define DEBOUNCE 6
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
//#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
//#define LOCKING_RESYNC_ENABLE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
|
|
/*
|
|
* MIDI options
|
|
*/
|
|
|
|
/* enable basic MIDI features:
|
|
- MIDI notes can be sent when in Music mode is on
|
|
*/
|
|
//#define MIDI_BASIC
|
|
|
|
/* enable advanced MIDI features:
|
|
- MIDI notes can be added to the keymap
|
|
- Octave shift and transpose
|
|
- Virtual sustain, portamento, and modulation wheel
|
|
- etc.
|
|
*/
|
|
//#define MIDI_ADVANCED
|
|
|
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
|
|
|
/* Backlight configuration
|
|
*/
|
|
#define BACKLIGHT_LEVELS 10
|
|
|
|
// This is a 7-bit address, that gets left-shifted and bit 0
|
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
|
// The address will vary depending on your wiring:
|
|
// 0b1110100 AD <-> GND
|
|
// 0b1110111 AD <-> VCC
|
|
// 0b1110101 AD <-> SCL
|
|
// 0b1110110 AD <-> SDA
|
|
#define LED_DRIVER_ADDR_1 0b1110100
|
|
#define I2C1_SCL 8
|
|
#define I2C1_SDA 9
|
|
|
|
#define LED_DRIVER_COUNT 1
|
|
#define DRIVER_LED_TOTAL 71
|
|
|
|
#define AUDIO_PIN A5
|
|
#define AUDIO_PIN_ALT A4
|
|
#define AUDIO_PIN_ALT_AS_NEGATIVE
|