qmk_sweep_skeletyl/keyboards/kapcave/paladin64/config.h
James Young 7baaac9531
Migrate LOCKING_*_ENABLE to Data-Driven: K, Part 1 (#23768)
Affects:

  - `kabedon/kabedon98e`
  - `kagizaraya/chidori`
  - `kagizaraya/halberd`
  - `kagizaraya/miniaxe`
  - `kagizaraya/scythe`
  - `kakunpc/angel17/alpha`
  - `kakunpc/angel17/rev1`
  - `kakunpc/angel64/alpha`
  - `kakunpc/angel64/rev1`
  - `kakunpc/business_card/alpha`
  - `kakunpc/business_card/beta`
  - `kakunpc/choc_taro`
  - `kakunpc/rabbit_capture_plan`
  - `kakunpc/suihankey/alpha`
  - `kakunpc/suihankey/rev1`
  - `kakunpc/suihankey/split/alpha`
  - `kakunpc/suihankey/split/rev1`
  - `kakunpc/thedogkeyboard`
  - `kapcave/arya`
  - `kapcave/gskt00`
  - `kapcave/paladin64`
  - `kapl/rev1`
  - `kb58`
  - `kb_elmo/aek2_usb`
  - `kb_elmo/m0110a_usb`
  - `kb_elmo/m0116_usb`
  - `kbdclack/kaishi65`
  - `kbdfans/bella/soldered`
  - `kbdfans/bounce/pad`
  - `kbdfans/jm60`
  - `kbdfans/kbd19x`
  - `kbdfans/kbd4x`
  - `kbdfans/kbd66`
  - `kbdfans/kbd67/hotswap`
  - `kbdfans/kbd67/mkii_soldered`
  - `kbdfans/kbd6x`
  - `kbdfans/kbd75/rev1`
  - `kbdfans/kbd75/rev2`
  - `kbdfans/kbd8x`
  - `kbdfans/kbd8x_mk2`
  - `kbdfans/kbdpad/mk2`
  - `kbdfans/maja_soldered`
  - `kbdfans/niu_mini`
  - `kbdfans/phaseone`
  - `kbdmania/kmac`
  - `kbdmania/kmac_pad`
  - `kc60`
2024-05-22 21:41:34 +01:00

73 lines
2.8 KiB
C

/*
Copyright 2021 KapCave
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Only required if you add in a trackpoint hardware to the pcb */
#ifdef PS2_DRIVER_USART
#define PS2_CLOCK_PIN D5
#define PS2_DATA_PIN D2
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling
* edge */
/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR1C = ((1 << UMSEL10) | \
(3 << UPM10) | \
(0 << USBS1) | \
(3 << UCSZ10) | \
(0 << UCPOL1)); \
UCSR1A = 0; \
UBRR1H = 0; \
UBRR1L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR1B = ((1 << RXCIE1) | \
(1 << RXEN1)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR1B = (1 << RXEN1); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR1C = 0; \
UCSR1B &= ~((1 << RXEN1) | \
(1 << TXEN1)); \
} while (0)
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
#define PS2_USART_RX_DATA UDR1
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
#define PS2_USART_RX_VECT USART1_RX_vect
#endif
#ifdef PS2_DRIVER_INTERRUPT
#define PS2_CLOCK_PIN D2
#define PS2_DATA_PIN D5
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC21) | \
(0<<ISC20)); \
} while (0)
#define PS2_INT_ON() do { \
EIMSK |= (1<<INT2); \
} while (0)
#define PS2_INT_OFF() do { \
EIMSK &= ~(1<<INT2); \
} while (0)
#define PS2_INT_VECT INT2_vect
#endif