mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/mechwild/puckbuddy
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps RESET -> QK_BOOT user keymaps (#17940) 2022-08-21 23:55:30 +01:00
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
glcdfont.c [Keyboard] MechWild Puckbuddy (#17161) 2022-08-09 17:23:44 -07:00
halconf.h [Keyboard] MechWild Puckbuddy (#17161) 2022-08-09 17:23:44 -07:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
mcuconf.h [Keyboard] MechWild Puckbuddy (#17161) 2022-08-09 17:23:44 -07:00
puckbuddy.c Remove IS_HOST_LED_ON and migrate usages (#19753) 2023-02-06 02:36:09 +00:00
puckbuddy.h Reallocate SAFE_RANGE (#19909) 2023-02-23 09:49:07 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

PuckBuddy

PuckBuddy

A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make mechwild/puckbuddy:default

Flashing example for this keyboard:

make mechwild/puckbuddy:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
  • Physical reset button: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. By default this is the top right key on layer 1.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.