qmk_sweep_skeletyl/keyboards/marksard/rhymestone/rev1/config.h

152 lines
5.8 KiB
C

/*
Copyright 2020 marksard
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xDFA1
#define DEVICE_VER 0x0020
#define MANUFACTURER marksard
#define PRODUCT Rhymestone
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 5
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
#define RGB_DI_PIN D3
#ifdef RGBLIGHT_ENABLE
// #ifdef RGB_DI_PIN
#define RGBLED_NUM 40
#define RGBLED_SPLIT {20, 20}
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 150 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
#ifdef RGB_MATRIX_ENABLE
#define RGBLED_NUM 40 // Number of LEDs
#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
// #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_HUE_STEP 8
#define RGB_MATRIX_SAT_STEP 8
#define RGB_MATRIX_VAL_STEP 8
#define RGB_MATRIX_SPD_STEP 10
// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS
// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
// #undef ENABLE_RGB_MATRIX_BREATHING
// #undef ENABLE_RGB_MATRIX_BAND_SAT
// #undef ENABLE_RGB_MATRIX_BAND_VAL
// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
// #undef ENABLE_RGB_MATRIX_CYCLE_ALL
// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN
// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
// #undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
// #undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL
// #undef ENABLE_RGB_MATRIX_DUAL_BEACON
// #undef ENABLE_RGB_MATRIX_RAINBOW_BEACON
// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
// #undef ENABLE_RGB_MATRIX_RAINDROPS
// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
// #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
// #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #undef ENABLE_RGB_MATRIX_SPLASH
// #undef ENABLE_RGB_MATRIX_MULTISPLASH
// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH
// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5