qmk_sweep_skeletyl/keyboards/preonic/rev3/config.h
James Young fced377ac0
2020 May 30 Breaking Changes Update ()
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` ()

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` ()

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` ()

* Migrate `ACTION_LAYER_MODS` to `LM()` ()

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` ()

* Convert V-USB usbdrv to a submodule ()

* Unify Tap Hold functions and documentation ()

* Changing board names to prevent confusion ()

* Move the Keyboardio Model01 to a keyboardio/ subdir ()

* Move spaceman keyboards ()

* Migrate miscellaneous `fn_actions` entries ()

* Migrate `ACTION_MODS_KEY` to chained mod keycodes ()

* Organizing my keyboards (plaid, tartan, ergoinu) ()

* Refactor Lily58 to use split_common ()

* Refactor zinc to use split_common ()

* Add a message if bin/qmk doesn't work ()

* Fix conflicting types for 'tfp_printf' ()

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup ()

* Refactor and updates to TKC1800 code ()

* Switch to qmk forks for everything ()

* audio refactor: replace deprecated PLAY_NOTE_ARRAY ()

* Audio enable corrections (2/3) ()

* Split HHKB to ANSI and JP layouts and Add VIA support for each ()

* Audio enable corrections (Part 4) ()

* Fix typo from PR7114 ()

* Augment future branch Changelogs ()

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00

130 lines
3.7 KiB
C

/*
* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV3_CONFIG_H
#define REV3_CONFIG_H
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0003
#undef MATRIX_ROWS
#undef MATRIX_COLS
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 6
#undef MATRIX_ROW_PINS
#undef MATRIX_COL_PINS
#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
#define UNUSED_PINS
#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }
#define DIP_SWITCH_PINS { B14, A15, A0, B9 }
#define MUSIC_MAP
#undef AUDIO_VOICES
// Note: following undef isn't really necessary on STM32, C6_AUDIO is AVR related
#undef C6_AUDIO
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
// #define WS2812_LED_N 2
// #define RGBLED_NUM WS2812_LED_N
// #define WS2812_TIM_N 2
// #define WS2812_TIM_CH 2
// #define PORT_WS2812 GPIOA
// #define PIN_WS2812 1
// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP
#define RGB_DI_PIN A1
#define RGBLED_NUM 9
#define RGBLIGHT_ANIMATIONS
#endif