History

Ryan 09a2b70a66 Move Alice and Ergodox layouts to data driven (#20340 )		2023-04-05 15:50:56 +10:00
..
keymaps
config.h	Move matrix config to info.json, part 3 (#19991 )	2023-03-11 00:34:34 +11:00
edda.c	Move Alice and Ergodox layouts to data driven (#20340 )	2023-04-05 15:50:56 +10:00
info.json	Move Alice and Ergodox layouts to data driven (#20340 )	2023-04-05 15:50:56 +10:00
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Keyboard Maintainer: martin
Hardware Supported: Edda PCB

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.