History

Konstantin Đorđević 2d39a9dcdb Remove no-longer-necessary LTO checks from keyboards' config.h files (#8773 ) * Remove no-longer-necessary LTO checks from keyboards' config.h files * Remove unnecessary LTO check in @danielo515's Ergodox EZ keymap * Remove unnecessary USE_Link_Time_Optimization checks from keyboards' config.h files Note: DISABLE_LEADER doesn't seem to be used anywhere		2020-04-19 23:56:48 +01:00
..
keymaps	Just60 Configurator layout support and thinxer keymap (#7761 )	2020-02-14 00:42:57 -08:00
config.h	Remove no-longer-necessary LTO checks from keyboards' config.h files (#8773 )	2020-04-19 23:56:48 +01:00
info.json	Just60 Configurator layout support and thinxer keymap (#7761 )	2020-02-14 00:42:57 -08:00
just60.h	[Keyboard] add Just60 keyboard (#7752 )	2020-01-01 22:28:05 -08:00
readme.md	[Keyboard] add Just60 keyboard (#7752 )	2020-01-01 22:28:05 -08:00
rules.mk	[Keyboard] add Just60 keyboard (#7752 )	2020-01-01 22:28:05 -08:00

readme.md

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, RESET, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Keyboard Maintainer: Jianfei Wang
Hardware Supported: Just60 (atmega32u4)
Hardware Availability: https://item.taobao.com/item.htm?id=564176654249

Make example for this keyboard (after setting up your build environment):

make just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.