mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/handwired/meck_tkl
History
Ryan 2da0827d4f
Remove matrix size defines (#19581)
2023-02-17 16:08:25 +11:00
..
blackpill_f401 Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
keymaps/default Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Move keyboard USB IDs and strings to data driven: handwired (#17822) 2022-07-30 17:31:44 +10:00
meck_tkl.c
meck_tkl.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk

readme.md

meck_tkl

meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Wiring instructions

  • On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
    • USB-related pins: PA10, PA11, PA12
    • BOOT1 pin: PB2

Sample wiring:

wiring