mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/cipulot/ec_prox/ansi_iso
History
Ryan 47966dc2a6
Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
config.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
ec_switch_matrix.c EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
ec_switch_matrix.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
halconf.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
matrix.c EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
mcuconf.h EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
readme.md EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00
rules.mk EC ProX PCB (#20047) 2023-03-23 10:09:50 +00:00

readme.md

EC Pro X ANSI/ISO

EC Pro X ANSI/ISO PCB

Open source replacement PCB kit for the HHKB Pro 2 and Pro 3 keyboards using the ANSI case.

  • Keyboard Maintainer: cipulot
  • Hardware Supported: EC Pro X ANSI_ISO PCB
  • Hardware Availability: EC Pro X

Make example for this keyboard (after setting up your build environment):

make cipulot/ec_prox/ansi_iso:default

Flashing example for this keyboard:

make cipulot/ec_prox/ansi_iso:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical Boot0 pins: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available