mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/fjlabs/polaris
History
James Young d5d1f16165
FJLabs Polaris Layout Additions and Touch-Up (#20622) 
* add matrix_diagram.md

* refactor keymaps

* fix Configurator implementation

The original C-based code had an off-by-one error in the key sequence, that was then converted in data-driven configurator without being corrected.

* info.json: apply friendly formatting

* add LAYOUT_60_ansi_split_bs_rshift

* add LAYOUT_60_ansi

* add LAYOUT_60_tsangan_hhkb

* add LAYOUT_60_ansi_tsangan

* add LAYOUT_60_iso_split_bs_rshift

* add LAYOUT_60_iso

* add LAYOUT_60_iso_tsangan_split_bs_rshift

* add LAYOUT_60_iso_tsangan

* enable Community Layout support

* edit keyboard maintainer
2023-04-29 10:44:07 -07:00
..
keymaps FJLabs Polaris Layout Additions and Touch-Up (#20622) 2023-04-29 10:44:07 -07:00
config.h Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
info.json FJLabs Polaris Layout Additions and Touch-Up (#20622) 2023-04-29 10:44:07 -07:00
matrix_diagram.md FJLabs Polaris Layout Additions and Touch-Up (#20622) 2023-04-29 10:44:07 -07:00
readme.md FJLabs Polaris Layout Additions and Touch-Up (#20622) 2023-04-29 10:44:07 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Polaris-Compatible Hotswap and Solder PCB's

The following is the QMK Firmware for the Polaris-Compatible Hotswap and Solder PCB's developed by FJLaboratories (FJLabs).

Make example for this keyboard (after setting up your build environment):

make fjlabs/polaris:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.