qmk_sweep_skeletyl/keyboards/converter/xmk

converter/xmk

converter/xmk is the QMK keyboard definition for 𝑥MK.

• Keyboard Maintainer: Manna Harbour
• Hardware Supported: Any QMK-compatible MCU board
• Hardware Availability: No additional hardware required

Make example for this keyboard (after setting up your build environment):

make converter/xmk:default

Flashing example for this keyboard:

make converter/xmk:default:flash

To flash pre-compiled firmware to a pro-micro on Linux without using the qmk CLI:

avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 4 ways:

• Boot shell command: Give the boot command to the converter/xmk shell, e.g. echo "boot" > /dev/ttyACM0
• Keycode in layout: Press the key mapped to QK_BOOT if it is available
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard