mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/quantum/quantum.h
Ted M Lin 552f8d81b9
Reduce PROGMEM usage for sendstring LUT (#8109) 
* Reduce PROGMEM usage for keycode map

Bit-pack the keycode bool array to gain back a small amount of flash space.
The trade-off is an increase in runtime instructions when running macros.

It does make the code a bit harder to read, as well as maintain.

For configs that use send_string() et al, it saves ~100 bytes.

* Switch to macro and common definition

Rewrite the array declarations so both the unpacked (original) and
packed LUT arrays can use the same value definitions. This is done by
defining a macro that "knows what to do".

This makes the code much easier to read and maintain.

* Fix macro typos and improve perf

Pack the bits in a more efficient order for extraction.
And also fix the copy/paste error in the macro...

* Switch fully to packed LUT

Some minor reformatting.
Compile tested all sendstring_xyz.h to make sure they were converted
properly. Also checked that an unconverted version would generate a
compile error.

* Apply whitespace suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-03 10:43:18 +11:00

286 lines
7.3 KiB
C
Raw Blame History

/* Copyright 2016-2018 Erez Zukerman, Jack Humbert, Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#if defined(__AVR__)
# include <avr/pgmspace.h>
# include <avr/io.h>
# include <avr/interrupt.h>
#endif
#if defined(PROTOCOL_CHIBIOS)
# include "hal.h"
# include "chibios_config.h"
#endif
#include "wait.h"
#include "matrix.h"
#include "keymap.h"
#ifdef BACKLIGHT_ENABLE
# ifdef LED_MATRIX_ENABLE
# include "ledmatrix.h"
# else
# include "backlight.h"
# endif
#endif
#if defined(RGBLIGHT_ENABLE)
# include "rgblight.h"
#elif defined(RGB_MATRIX_ENABLE)
// Dummy define RGBLIGHT_MODE_xxxx
# define RGBLIGHT_H_DUMMY_DEFINE
# include "rgblight.h"
#endif
#ifdef RGB_MATRIX_ENABLE
# include "rgb_matrix.h"
#endif
#include "action_layer.h"
#include "eeconfig.h"
#include "bootloader.h"
#include "timer.h"
#include "config_common.h"
#include "led.h"
#include "action_util.h"
#include "print.h"
#include "send_string_keycodes.h"
#include "suspend.h"
#include <stddef.h>
#include <stdlib.h>
extern layer_state_t default_layer_state;
#ifndef NO_ACTION_LAYER
extern layer_state_t layer_state;
#endif
#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
# include "process_midi.h"
#endif
#ifdef AUDIO_ENABLE
# include "audio.h"
# include "process_audio.h"
# ifdef AUDIO_CLICKY
# include "process_clicky.h"
# endif
#endif
#ifdef STENO_ENABLE
# include "process_steno.h"
#endif
#if defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
# include "process_music.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "process_backlight.h"
#endif
#ifdef LEADER_ENABLE
# include "process_leader.h"
#endif
#ifdef UNICODE_ENABLE
# include "process_unicode.h"
#endif
#ifdef UCIS_ENABLE
# include "process_ucis.h"
#endif
#ifdef UNICODEMAP_ENABLE
# include "process_unicodemap.h"
#endif
#ifdef TAP_DANCE_ENABLE
# include "process_tap_dance.h"
#endif
#ifdef PRINTING_ENABLE
# include "process_printer.h"
#endif
#ifdef AUTO_SHIFT_ENABLE
# include "process_auto_shift.h"
#endif
#ifdef COMBO_ENABLE
# include "process_combo.h"
#endif
#ifdef KEY_LOCK_ENABLE
# include "process_key_lock.h"
#endif
#ifdef TERMINAL_ENABLE
# include "process_terminal.h"
#else
# include "process_terminal_nop.h"
#endif
#ifdef SPACE_CADET_ENABLE
# include "process_space_cadet.h"
#endif
#ifdef MAGIC_KEYCODE_ENABLE
# include "process_magic.h"
#endif
#ifdef GRAVE_ESC_ENABLE
# include "process_grave_esc.h"
#endif
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
# include "process_rgb.h"
#endif
#ifdef HD44780_ENABLE
# include "hd44780.h"
#endif
#ifdef HAPTIC_ENABLE
# include "haptic.h"
#endif
#ifdef OLED_DRIVER_ENABLE
# include "oled_driver.h"
#endif
#ifdef DIP_SWITCH_ENABLE
# include "dip_switch.h"
#endif
#ifdef DYNAMIC_MACRO_ENABLE
# include "process_dynamic_macro.h"
#endif
#ifdef DYNAMIC_KEYMAP_ENABLE
# include "dynamic_keymap.h"
#endif
#ifdef VIA_ENABLE
# include "via.h"
#endif
// Function substitutions to ease GPIO manipulation
#if defined(__AVR__)
typedef uint8_t pin_t;
# define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
# define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
# define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
#elif defined(PROTOCOL_CHIBIOS)
typedef ioline_t pin_t;
# define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
# define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
# define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
# define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
# define writePinHigh(pin) palSetLine(pin)
# define writePinLow(pin) palClearLine(pin)
# define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
# define readPin(pin) palReadLine(pin)
#endif
#define SEND_STRING(string) send_string_P(PSTR(string))
#define SEND_STRING_DELAY(string, interval) send_string_with_delay_P(PSTR(string), interval)
// Look-Up Tables (LUTs) to convert ASCII character to keycode sequence.
extern const uint8_t ascii_to_keycode_lut[128];
extern const uint8_t ascii_to_shift_lut[16];
extern const uint8_t ascii_to_altgr_lut[16];
// clang-format off
#define KCLUT_ENTRY(a, b, c, d, e, f, g, h) \
( ((a) ? 1 : 0) << 0 \
| ((b) ? 1 : 0) << 1 \
| ((c) ? 1 : 0) << 2 \
| ((d) ? 1 : 0) << 3 \
| ((e) ? 1 : 0) << 4 \
| ((f) ? 1 : 0) << 5 \
| ((g) ? 1 : 0) << 6 \
| ((h) ? 1 : 0) << 7 )
// clang-format on
void send_string(const char *str);
void send_string_with_delay(const char *str, uint8_t interval);
void send_string_P(const char *str);
void send_string_with_delay_P(const char *str, uint8_t interval);
void send_char(char ascii_code);
// For tri-layer
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
layer_state_t update_tri_layer_state(layer_state_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3);
void set_single_persistent_default_layer(uint8_t default_layer);
void tap_random_base64(void);
#define IS_LAYER_ON(layer) (layer_state & (1UL << (layer)))
#define IS_LAYER_OFF(layer) (~layer_state & (1UL << (layer)))
void matrix_init_kb(void);
void matrix_scan_kb(void);
void matrix_init_user(void);
void matrix_scan_user(void);
uint16_t get_record_keycode(keyrecord_t *record);
uint16_t get_event_keycode(keyevent_t event);
bool process_action_kb(keyrecord_t *record);
bool process_record_kb(uint16_t keycode, keyrecord_t *record);
bool process_record_user(uint16_t keycode, keyrecord_t *record);
#ifndef BOOTMAGIC_LITE_COLUMN
# define BOOTMAGIC_LITE_COLUMN 0
#endif
#ifndef BOOTMAGIC_LITE_ROW
# define BOOTMAGIC_LITE_ROW 0
#endif
void bootmagic_lite(void);
void reset_keyboard(void);
void startup_user(void);
void shutdown_user(void);
void register_code16(uint16_t code);
void unregister_code16(uint16_t code);
void tap_code16(uint16_t code);
void send_dword(uint32_t number);
void send_word(uint16_t number);
void send_byte(uint8_t number);
void send_nibble(uint8_t number);
uint16_t hex_to_keycode(uint8_t hex);
void led_set_user(uint8_t usb_led);
void led_set_kb(uint8_t usb_led);
bool led_update_user(led_t led_state);
bool led_update_kb(led_t led_state);
void api_send_unicode(uint32_t unicode);
Reference in a new issue View git blame Copy permalink