History

Ryan 56555c61e1 Migrate `LAYOUTS` to data driven (#19541 ) * Migrate `LAYOUTS` to data driven, 0-9 * Migrate `LAYOUTS` to data driven, A * Migrate `LAYOUTS` to data driven, B * Migrate `LAYOUTS` to data driven, C * Migrate `LAYOUTS` to data driven, D * Migrate `LAYOUTS` to data driven, E * Migrate `LAYOUTS` to data driven, F * Migrate `LAYOUTS` to data driven, G * Migrate `LAYOUTS` to data driven, H * Migrate `LAYOUTS` to data driven, handwired * Migrate `LAYOUTS` to data driven, I * Migrate `LAYOUTS` to data driven, J * Migrate `LAYOUTS` to data driven, K * Migrate `LAYOUTS` to data driven, L * Migrate `LAYOUTS` to data driven, M * Migrate `LAYOUTS` to data driven, N * Migrate `LAYOUTS` to data driven, O * Migrate `LAYOUTS` to data driven, P * Migrate `LAYOUTS` to data driven, Q * Migrate `LAYOUTS` to data driven, R * Migrate `LAYOUTS` to data driven, S * Migrate `LAYOUTS` to data driven, T * Migrate `LAYOUTS` to data driven, U * Migrate `LAYOUTS` to data driven, V * Migrate `LAYOUTS` to data driven, W * Migrate `LAYOUTS` to data driven, X * Migrate `LAYOUTS` to data driven, Y * Migrate `LAYOUTS` to data driven, Z		2023-01-10 02:48:20 +00:00
..
galaxy	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
hades	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
venus	Migrate `LAYOUTS` to data driven (#19541 )	2023-01-10 02:48:20 +00:00
config.h	VIA V3 - The Custom UI Update (#18222 )	2022-11-10 07:46:44 +11:00
dgk6x.c	Fix Per Key LED Indicator Callbacks (#18450 )	2022-10-04 15:24:22 -07:00
dgk6x.h
halconf.h	Durgod: Increase scan rate by using wait_us GPT timer (#14091 )	2021-12-27 14:04:26 +11:00
mcuconf.h
readme.md
rules.mk	Fixes for bootloader refactor build failures (#15638 )	2022-01-06 06:55:46 +11:00

readme.md

DGK6X = Venus, Hades, Galaxy, etc.

This DGK6X code is shared between the ANSI variants of Venus, Hades and Galaxy keyboards.

Keyboard Maintainer: J-Sully and dkjer
Hardware Supported: Durgod Venus, Hades or Galaxy board with STM32F070RBT6
Hardware Availability: Venus, Hades and Galaxy

Instructions

Build

Instructions for building the Venus, Hades and Galaxy firmware can be found here:

Initial Flash

For first Flashing from initial Stock's Firmware

Back up original Firmware Image:

Unplug
Short Boot0 to Vdd (See below)
Plug In USB
Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
- Using dfu-util:
```
dfu-util --list
dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
```

Flash the QMK Firmware Image.

Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
Here are a few options for performing the initial Flash:
- Using QMK Toolbox
- Using dfu-util:
```
dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
```

You can short Boot0 to Vdd by shorting R19 to C30 on the sides closest to the processor, as shown:

Hades & Venus:
Galaxy 75

Subsequent Flashing

For repeating Flashing you can use BootMagic:

BootMagic Lite has been enabled with Assigned "Esc" key
Unplug USB Cable
Holding Esc Button
Plug in USB Cable, Keyboard should be in ST-Bootloader state