History

Stefan Kerkmann 19145704e4 [Core] Adjust PWM hardware audio driver for RP2040 (#17723 )		2022-10-27 19:26:16 +02:00
..
f401	Specify blackpill board files where relevant (#17521 )	2022-07-01 15:38:57 +01:00
f411	[Core] Adjust PWM hardware audio driver for RP2040 (#17723 )	2022-10-27 19:26:16 +02:00
keymaps	RESET -> QK_BOOT default keymaps (#17939 )	2022-08-07 02:23:58 +01:00
chconf.h
config.h	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
halconf.h	[Core] Adjust PWM hardware audio driver for RP2040 (#17723 )	2022-10-27 19:26:16 +02:00
info.json	Move keyboard USB IDs and strings to data driven: handwired (#17822 )	2022-07-30 17:31:44 +10:00
macroboard.c
macroboard.h
mcuconf.h	[Core] Adjust PWM hardware audio driver for RP2040 (#17723 )	2022-10-27 19:26:16 +02:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00

readme.md

macroboard

3D printable half preonic (5x6 OLKB) with purpose of being macroboard or if you want to have different switches for gaming while having normal full keyboard for typing.

Keyboard Maintainer: Michał Szczepaniak
Hardware Supported: Blackpill
Hardware Availability: OpenSCAD files

Make example for this keyboard (after setting up your build environment):

make handwired/macroboard:default

Flashing example for this keyboard:

make handwired/macroboard:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available, by default 5th column, 5th row