History

Ryan 7e0299117b Move encoder config to data driven (#19923 ) Co-authored-by: Nick Brassel <nick@tzarc.org>		2023-02-26 09:45:12 +11:00
..
keymaps	Reworked backlight keycodes. (#18961 )	2022-11-06 08:11:59 +11:00
config.h	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
info.json	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
neito.c
neito.h
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Neito

by Oliver Granlund

ISO-variant of TGR Alice with a few tweaks!

Keyboard Maintainer: Oliver Granlund
Hardware Supported: Neito PCB (ATmega32U4)
Hardware Availability: Group Buys hosted on https://olli.works

Getting the board into bootloader mode:

To be able to flash firmware onto this board, you'll need to bring the keyboard into bootloader mode. The keyboard has a debug-panel located between the keys "H" and "N". In this 2x3-panel, short the two pins which are furthest away from the atmega32u4 microcontroller. See the red arrows in the image below.

Make example for this keyboard (after setting up your build environment):

make neito:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.