mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/studiokestra/galatea
History
Ryan 2da0827d4f
Remove matrix size defines (#19581)
2023-02-17 16:08:25 +11:00
..
keymaps Remove legacy keycodes, part 6 (#18740) 2022-10-16 14:14:40 +01:00
rev1 Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
rev2 Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
galatea.c
galatea.h
readme.md Revert RESET-> QK_BOOT in Read Me files where applicable (#19262) 2022-12-09 03:12:49 +11:00
rules.mk

readme.md

Galatea

TKL H87/88c compatible PCB with support for the most common layouts.

  • Keyboard Maintainer: Studio Kestra
  • Hardware Supported: studiokestra.ca/galatea
  • Hardware Availability: In-Stock Sale (Dec 2021)
  • Rev1 firmware is used for Galatea PCBs with no RGB underglow.
  • Rev2 firmware is used for Galatea PCBs with RGB underglow.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the R key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/galatea/rev1:default

If no revision is specified, it will build rev1 firmware by default.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.