mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/peiorisboards/ixora
History
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
chconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
config.h Remove DESCRIPTION, N-Q (#11631) 2021-01-20 11:57:45 +11:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
ixora.c Refactor to use led config - Part 3 (#10966) 2020-11-18 17:51:53 +00:00
ixora.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
readme.md [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Ixora

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Peioris
Hardware Supported: Ixora PCB
Hardware Availability: Peioris

Make example for this keyboard (after setting up your build environment):

make peiorisboards/ixora:default:dfu-util

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).