mg/qmk_sweep_skeletyl
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
qmk_sweep_skeletyl/keyboards/jm60
History
Ryan 9366ed7282
Normalise include statements in keyboard code (#11185)
2020-12-16 14:27:23 +11:00
..
boards/JM60_BOARD Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
keymaps Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154) 2019-02-17 07:38:46 -08:00
ld Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
chconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
config.h Remove "ugly hack in usb_main.c" comments (#8296) 2020-03-02 23:56:46 +00:00
halconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
jm60.c Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
jm60.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
led.c Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
matrix.c Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
mcuconf.h Basic support for JM60 keyboard 2017-09-10 22:58:55 -04:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Set MCU for some F103 boards (#8459) 2020-03-19 01:33:17 +00:00

readme.md

JM60

A compact 60% keyboard with full RGB led support.

Keyboard Maintainer: QMK Community
Hardware Supported: JM60
Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)

Make example for this keyboard (after setting up your build environment):

make jm60:default:bin

See build environment setup then the make instructions for more information.

Flashing Instructions

  1. from the qmk_firmware directory run:
$ make jm60:default:bin

  1. rename 'jm60_default.bin' to 'jm60_default.firmware'

  2. Press 'R' and reconnect the keyboard.

  3. Start the original Configuration Tool and flash 'jm60_default.bin'