qmk_sweep_skeletyl/keyboards/helix/rev1/keymaps/OLED_sample
Takeshi ISHII 4665e4ffff Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify

* Add comment about ATmega32U4 I2C

* Add compile time check for ATmega32U4 I2C

* change TAB code to 8 SPACE code

* Helix serial.c PORTD,PD0 test. OK

  OK PD0
  -  PD1
  OK PD2
  -  PD3
  -  PE6

* Helix serial.c PORTD,PD1 test. OK

   OK PD0
   OK PD1
   OK PD2
   -  PD3
   -  PE6

* Helix serial.c PORTD,PD3 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   -  PE6

* Helix serial.c PORTE,PD6 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   OK PE6

* Helix serial.c: PD0,PD1,PD3,PE6 all test end

* Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN

* Helix serial.c add debug code

* Helix serial.c: add transaction ID range check

* Helix serial.c debug code update

* Helix serial.c debug code update

* Helix serial.c: Strict checking of the value of tid.

* adjust the delay of serial.c

* Helix serial.c: remove debug code

* remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk

tmk_core/common.mk has
 >ifeq ($(strip $(CONSOLE_ENABLE)), yes)
 >   TMK_COMMON_DEFS += -DCONSOLE_ENABLE

* Fix error handling in split_scomm.c

* add some comment to serial.c

* add some comment about SELECT_SOFT_SERIAL_SPEED
2018-10-22 11:38:05 -07:00
..
config.h Make PREVENT_STUCK_MODIFIERS the default (#3107) 2018-09-17 13:48:02 -04:00
keymap.c Keymaps: Helix rgblight mode update (#4091) 2018-10-10 12:53:18 -07:00
readme.md Add helix keyboard (#2308) 2018-01-28 12:14:12 -05:00
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
serial_config.h Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191) 2018-10-22 11:38:05 -07:00

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

Work in progress...

OLED Configuration

Work in progress...